Murdered a cocky STR8 charger!! :)
#1
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Murdered a cocky STR8 charger!! :)
It's sure been awhile since I've had a race but loved every minute of it. I was pulling out of the gas station up the street from my house and noticed a SRT8 charger at the pump. The guy was getting into his car so I decided to wait for him to get his car started before I drove off. Once he pulled away from the pump I pulled out into the hwy and stopped at the stop light. He pulls up next to me and asked how fast my car was. I said it'll top out at around 135mph. He then had this little smile on his face and said dude I'll smoke your ***. I just kinda laughed and said I really don't think so. The very next words out of his mouth before he rolled his window back up was I guess we'll see. The light turned green and the dude floors it and roast the tires. I really did nothing but give it enough gas to stay on side him. Once we got up to about 50-60mph with him running the **** out of his car I nailed it. Spun the *** end of my car sideways and took off. By the time I hit 110 I had the guy by about 7-8 cars and let off at 125mph. with him way back. I slowed down to let him get back besides me but he just stayed way back there going very slow. I really don't drive my car much so it's cool to get a race when I do drive it. Hope you enjoyed.
Last edited by odarabla; 09-19-2008 at 09:47 PM.
#5
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
2002 Z28 Camaro A4 with Trickflow 215cc heads milled to 62cc, Harland sharp shaft roller rockers 1.7 ratio, 23X/23X-64X/61X-114LSA cam, FMS chrome-moly hardened 5/16" push rods 7.500", ARP hex head bolts, FMS ported oil pump, LS6-2 timing chain, 30lb SVO injectors, SLP 85mm MAF, SLP Lid, K&N drop in, Hooker longtubes and y-pipe, Magnaflow catback, PTC 4400 Stall converter, built 4L60E, Strange 12bolt with 4.10 gears, ported fast 90mm, NW TB, Custom Racetronix / Walbro 255 pump and dyno tuned by Allan Futral.
#6
TECH Apprentice
Join Date: Apr 2007
Location: Tempe, Az
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
2002 Z28 Camaro A4 with Trickflow 215cc heads milled to 62cc, Harland sharp shaft roller rockers 1.7 ratio, 23X/23X-64X/61X-114LSA cam, FMS chrome-moly hardened 5/16" push rods 7.500", ARP hex head bolts, FMS ported oil pump, LS6-2 timing chain, 30lb SVO injectors, SLP 85mm MAF, SLP Lid, K&N drop in, Hooker longtubes and y-pipe, Magnaflow catback, PTC 4400 Stall converter, built 4L60E, Strange 12bolt with 4.10 gears, ported fast 90mm, NW TB and dyno tuned by Allan Futral.
Trending Topics
#8
Moderator
iTrader: (15)
2002 Z28 Camaro A4 with Trickflow 215cc heads milled to 62cc, Harland sharp shaft roller rockers 1.7 ratio, 23X/23X-64X/61X-114LSA cam, FMS chrome-moly hardened 5/16" push rods 7.500", ARP hex head bolts, FMS ported oil pump, LS6-2 timing chain, 30lb SVO injectors, SLP 85mm MAF, SLP Lid, K&N drop in, Hooker longtubes and y-pipe, Magnaflow catback, PTC 4400 Stall converter, built 4L60E, Strange 12bolt with 4.10 gears, ported fast 90mm, NW TB, Custom Racetronix / Walbro 255 pump and dyno tuned by Allan Futral.
Good kill.
#10
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Here is a old video of my car before the new stall, ported intake and 28"tall slicks. This pass the car would only stall to about 2800rpm and I was running out of gear at the 1000ft mark.. enjoy!!
http://videos.streetfire.net/video/2...172_160548.htm
http://videos.streetfire.net/video/2...172_160548.htm
#12
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
That's a nice Stang you have there!! What do you run in the 1/4? Your #'s are really close to mine but I make a little more hp and tq. 447rwhp and 403rwtrq which is up since I put the new fuel pump, intake and throttle body in and had it retuned. From 423rwhp and 387rwtrq to the above #'s.
#16
10 Second Club
Thread Starter
iTrader: (1)
Join Date: Sep 2007
Location: In Uranus!
Posts: 1,500
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys!! I've been working hard trying to get the car ready for pinks allout in December. Can't wait!! What do you guys think about adding about 100hp shot of spray to the car?
#18