UMI STB Fitment Issue
#21
TECH Junkie
iTrader: (15)
NO, it is NOT completely different. The only difference is that the 3 or 4 point STBs also connect to the firewall. This, however, does NOT change the face that the bar has to go over the studs of the upper shock mount....
OK, I'm going to edit this, to avoid what appears to be some confusion. After looking at both BMR and UMI's sites, it appears that they are using "slots" on their STBs, instead of holes. I imagine that they are doing this for ease of installation, however it may allow for some movement or "flexure" at the mounting point of the STB. The LG Motorsports STB that I have has 4 distinct holes in the mounting tabs, and this STB mounts "snugly" over the shock mount studs, therefore it is impossible to install my STB without dropping the shock/spring ***'y.
Apparently, the STB that "mitchntx" either has, or has seen, is constructed the same as mine, therefore his agreement with me, on the mounting procedure....
OK, I'm going to edit this, to avoid what appears to be some confusion. After looking at both BMR and UMI's sites, it appears that they are using "slots" on their STBs, instead of holes. I imagine that they are doing this for ease of installation, however it may allow for some movement or "flexure" at the mounting point of the STB. The LG Motorsports STB that I have has 4 distinct holes in the mounting tabs, and this STB mounts "snugly" over the shock mount studs, therefore it is impossible to install my STB without dropping the shock/spring ***'y.
Apparently, the STB that "mitchntx" either has, or has seen, is constructed the same as mine, therefore his agreement with me, on the mounting procedure....
#23
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,604
Likes: 0
Received 6 Likes
on
6 Posts
This is one thing to like about the Hotchkiss STB, it has separate
pedestals and crossbar and you can get the pedestals loosely
installed and canted, get the crossbar in and then dog them down.
pedestals and crossbar and you can get the pedestals loosely
installed and canted, get the crossbar in and then dog them down.