questions about a tubular k member
#1
Teching In
Thread Starter
Join Date: Feb 2011
Location: Sj
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey im looking into putting in a tubular k member on my ls1 f body but my question is can i use my stock lower and upper control arms or i would have to go with the after market ones any suggestins will help thank you.
#5
LS1Tech Premium Sponsor
iTrader: (40)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Your stock uppper and lower a-arms will fit wih our BMR k-member, now if you were debating on doing the a-arms now or at a later date I would try to do everything at once because there is some overlapping labor and you would need to get another alignment if you did the k-member and a-arms at seperate times. If there is anything I can help you with let me know.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
![](https://ls1tech.com/forums/signaturepics/sigpic136487_1.gif)
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
![](https://ls1tech.com/forums/signaturepics/sigpic136487_1.gif)
Find a Quality alignment shop near you!