chrismcdaniel

iTrader: (14)

Easily to Finish project. Check out the parts list.. $16k OBO Not Parting it out unless i get what i need out of the Motor trans and Rear..
808 738 7097
cmmac76@hotmail.com
2000 Camaro SS Body, stripped for race car use only..

LME 408 stroker, with only 700 miles on it. 11.8:CR, TFS 225 Heads. Ported Vic Jr. Intake
accufab 4500 TB (Not Installed)
Edelbrock Stepped RACE headers with Dynomax 3” bullets (mufflers New, not installed
Meziere Race electric water pump (not installed)
BRAN NEW NEVER INSTALLED Rossler T2 TH400 with JW Ultrabell, Lockar dipstick, Trans Break , Deep Pan, -6 connectors
Bran New TCI SFI ap. Flex plate and all new hardware
BRAN NEW Carbon Fiber B&M ratchet shifter with trans brake button. (Not Installed)
BRAND NEW moser 9” with strange center aection, full spool, 3:89 gears, 31 pline chromloy axles, assembled and installed on car, but never driven.

Suspension
New UMI adj. Torque arm with DS LOOP (installed)
New UMI adj. LCAs (installed)
New UMI adj. Panhard (installed)
New SPOHN extreme drag sway bar, not installed
New UMI th400 cross member, not installed
HAL Qa1 12 way adjustable shock
PA K member
Poly Motor Mounts
Adj. BMR tubular Lower A Arms ( Not Installed)
\
Sitting on Prostars

Other parts for the car not installed… im sure its an unfinished list
Line lock
ABS delete kit
Radiator for M6 car
Bran New -6 tranny cooler
Brand New KIRKEY race seat with cover
Brand new Grant steering wheel installed
60 lb injectors not installed
HP tunners with data logger cable


to finish this, It needs a Drive shaft, A Cage, and a convertor, nitrous sustem, tune, and whatever else you might want to make it yours....

Random Pics, can get pics of any parts..














[IMG]http://img.photobucket.com/albums/v332/chrismcdaniel/GetAttachment.jpg[/IMG

chrismcdaniel

iTrader: (14)

OBO or would be interested in trading on a Harley

chrismcdaniel

iTrader: (14)

Bump,

IF i cant sell it as a package, i will start parting it... but would perfer to sell as a package right now.. though im sure im loosing money by not parting.

chrismcdaniel

iTrader: (14)

OBO bump

5'5 Big Bob

iTrader: (2)

if you decide to part out please pm me. would be interested in rear setup

chrismcdaniel

iTrader: (14)

can do. I think im going to let this sit asa package for one week, then ill part it out.. Would like to get an offer on the motor first though.

00SSog

iTrader: (1)

if u do do start parting out let me know how much for that steering wheel

chrismcdaniel

iTrader: (14)

If i get a solid offer on the LME 408, ill part the car out.. also interested in Harleys in trade.

Ego Killer

iTrader: (147)

I might be interested in the roller

BassProCamaro97

iTrader: (10)

If you do decide to part it out PM me about the complete roller.It looks like it could be a fun project.

Thanks,

~Jim~

JetVette

iTrader: (1)

pm me price on trans if ur willing to part it out.

chrismcdaniel

iTrader: (14)

looking for offers on the LME 408.

chrismcdaniel

iTrader: (14)

Invoice for motor From LME

408" Iron Balanced, blue printed and assembled short block. Eagle
4.0" crankshaft, Callies6.125 H beam rods w/ ARP 2000 7/16"
bolts, Wiseco 4.030" forged pistons, C&A dura moly rings, Federal
Mogal 152M main brgs, Clevite cb663 H rod brgs, Dura Bond cam
brgs, ARP main studs.
3,900.00 3,900.00T
Trick Flow LS1 heads. CNC ported 225 cc int. runner, 13deg.
valve angle, relocated spark plug (to deshroud int. valve) Ferrea
2.080" 1.600" valves, Manley Nex Tek dual valve springs,
Titanium retainers, machined locks & locators, GM valve seals.
Heads flow 340 CFM
2,400.00 2,400.00T
Cam Motion custom LS1 camshaft 400.00 400.00T
Roll master double roller timing set w/ torington bearing &
nitrided gears.
129.00 129.00T
Crane Hyd. Roller Lifters LS1 #10530-16 210.00 210.00T
GM MLS head gaskets 75.00 75.00T
LS1 ARP head stud kit 235.00 235.00T
LS1 push Rods Comp cams #7955-16 100.00 100.00T
LS6 Oil Pump ported & shimmed 100.00 100.00T
assemble longblock ( degree cam, check P to V, install heads, set
up valve train)
200.00 200.00
Edelbrock carb intake w/ injector bungs, fuel rails 425.00 425.00T
Port & polish Edelbrock intake 400.00 400.00
Sheetmetal elbow from Intake Elbows.com 200.00 200.00T
Page 1
Invoice
Date
8/7/2006
Invoice #
12037
Bill To
Chris McDaniel
155 Komohana Ct.
#102
Wahiawa, Hawi 96786
Late Model Engines, LLC
6040 Brittmoore Rd
Suite J
Houston, TX 77041
Project
408" Iron
Hope to do business with you soon!
Phone #
713-849-4505
Fax #
713-856-5787
E-mail
lme@houston.rr.com
Web Site
www.Late Model Engine.com
Total
Balance Due
Payments/Credits
Description Qty Rate Amount
customer freight charges 539.00 539.00
front main seal 19.00 19.00T
Nick williams throttle body 419.00 419.00T
Page 2
$9,751.00
$0.00
$-9,751.00

chrismcdaniel

iTrader: (14)

OBO bump

chrismcdaniel

iTrader: (14)

Also interested in Harleys... Street Glide is my favorite flavor

chrismcdaniel

iTrader: (14)

bump it up

import_eater

guess your not parting it yet?

BadA** SS

iTrader: (3)

very interested in the steering wheel... where did you get it

chrismcdaniel

iTrader: (14)

i got the sterring wheel from summit, its just a grant wheel, and you can buy the ss horn button from them.

chrismcdaniel

iTrader: (14)

Obo.. Bump...