500whp Built Blown Eaton swapped 99 Cobra Texas
03-14-2010, 12:10 PM
#1
Registered User
Thread Starter
Join Date: Mar 2010
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
500whp Built Blown Eaton swapped 99 Cobra Texas Year: 1999
Make: Ford
Model: Mustang Cobra
Price: $12000
Mileage: 124
Private or Dealer Listing: Private Listing
Location (State): TX
Color: Red
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has other engine
Promotion Powertrain T-45 is NOT WORKING needs a cluster gear.
SO..... 12K OBO as it sits.
Tuned at Gearheads performance made over 500hp and tq
and Im sure that Im leaving some things out
NEW paint
NEW wheels with NEW Nitto Drags
Engine ~2500 Miles
* MMR 4.6 Street Mod 900
* Build for ALOT of boost. ready for whatever you can throw at it
* 8.6cr
* ALL ARP Hardware
* Melling high volume oil pump with billet gears
* Oil filter relocation kit (holds 8qts of oil)
* 2004 revised heads (9 thread plugs) 03/04 Cobra/ Mach 1 cams
* Energy Suspension Motor mounts
* Manley Pistons
* Head cooling mod
* All new OEM ford radiator hoses and belts etc..
* Stiegey III Porter Supercharger
* 2.76 Billetflow upper pulley and Metco 4lb lower pulley
* All Idlers (Billetflow and LFP)
* LFP Tensioner
* LFP Intercooler reservoir
* LFP Intercooler
* Meziere Intercooler pump
* Reische Performance Thermostat
* Steeda Ram Air Intake
* Optima Yellow top battery
Exhaust
* BBK Long Tube Headers
* BBK o/r H-pipe
* Flowmaster mufflers
Transmission
* Promotion Powertrain spec "TOP GUN" cryod T-45
* all carbon fiber syncros
* Pro-5.0 short throw shifter with a MGW shifter handle
* cryo'd 1st,2nd,3rd gears
* cryo'd input shaft 26 SPLINE (4th)
* Mcleod 26 spline Twin Disk Clutch - a $800 clutch setup if you EVER have any problems with it send it back to Mcleod with $400 and they "rebuild" it
* Mcleod aluminum flywheel
* Steeda adjustable clutch cable, quadrant and firewall adjuster
Fuel
* 03/04 Cobra Baffled tank
* Fore Precision Works 99-04 GT Dual Pump Billet Top Hat
* Twin Ford GT Supercar pumps
* Twin FPDM's
* 60lb fuel injectors
* -8 line from tank to rails with aeromotive inline filter
Suspension/Brakes
* QA1 tubular K-member
* QA1 Tubular front A-arms
* Maximum Motorsports Front AND Rear Coil over Suspension
* Koni double adjustable shocks and struts
* Maximum Motorsports caster/camber plates
* FULL Delrin bushings in independent rear suspension (IRS) upper and lower Control arms and solid mounted differential
* Billitflow IRS brace
* 03/04 cobra IRS Brace
* 31 spline FRPP differental
* 31 spline axles
* Brembo blank rotors with 7k miles
* NEW hawk HPS brake pads
* Maximum Motorsports stainless steel front and rear brake lines
with stock 03/04 wheels
Last edited by TXGEARHEAD; 03-15-2010 at 06:22 PM.
03-14-2010, 12:14 PM
#2
Registered User
Thread Starter
Join Date: Mar 2010
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
FYI if you would like any references or anything let me know. I am obviously new to this site. I have been active for years on several other (mustang and SVT) boards. Thanks!
