'00 camaro w/ LS1 swap FOR SALE
02-11-2009, 11:57 PM
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Miami Fl.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
*SALE PENDING* '00 camaro w/ LS1 swap FOR SALE ***SOLD***SOLD***
Hey all Im trying get some money for a down payment on a home and wanted to put out a feeler. I have a '00 Pewter Camaro that had an LS1 swap performed by RevXtreme. All the engine goodies in my sig were installed at that time. The car was tuned by Dan @ Masport and run strong. Most of the suspension components were installed @ D'Agostino Racing.
The car has a clear title but some lady backed into my front passenger quarter panel and left a nice 4" hole right around the area where the Z28 or SS decals would go. Other than that the paint is pretty good for a 9 year old car.
The interior is in OK shape. The drivers side seat has the usual tear on the bolster. The carpets are in good shape. It has an updated updated sound system with front and rear infinity components and a 10" Rockford Fosgate sub.
Pics on my homepage. I would like to get $6000 for her. The engine and rims are worth that alone. If your interested let me know.
Shane
***SOLD***SOLD***
Hey all Im trying get some money for a down payment on a home and wanted to put out a feeler. I have a '00 Pewter Camaro that had an LS1 swap performed by RevXtreme. All the engine goodies in my sig were installed at that time. The car was tuned by Dan @ Masport and run strong. Most of the suspension components were installed @ D'Agostino Racing.
The car has a clear title but some lady backed into my front passenger quarter panel and left a nice 4" hole right around the area where the Z28 or SS decals would go. Other than that the paint is pretty good for a 9 year old car.
The interior is in OK shape. The drivers side seat has the usual tear on the bolster. The carpets are in good shape. It has an updated updated sound system with front and rear infinity components and a 10" Rockford Fosgate sub.
Pics on my homepage. I would like to get $6000 for her. The engine and rims are worth that alone. If your interested let me know.
Shane
***SOLD***SOLD***
Last edited by snatch; 02-27-2009 at 10:40 AM.
02-12-2009, 07:30 AM
#3
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Miami Fl.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Sure! You can kind of see it in the first and last pic right above the "LS1" badge on the Q.P. Ill get some better pics of it as well as the interior and engine bay.
Shane
Shane
02-12-2009, 09:29 AM
#7
TECH Apprentice
iTrader: (5)
Join Date: Dec 2007
Location: Southern Colorado Front Range
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Nice looking ride. I never really liked the "hockey stick" stripes. But they really look nice on this car for some reason. $6k isn't a bad price at all either. Somebody is going to get the deal of the day. lol How do you like those tires?
Trending Topics
02-12-2009, 10:07 AM
#8
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Miami Fl.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
There are more pics on my homepage. The link is at the bottom of my sig. If you need something specific let me know and Ill snap some.
The tranny is a stock A4 with a Vig 3200 stall and B&M cooler. The rear end has 3.42 gears, new seal & oil and a summit racing aluminum diff cover with girdle supports that was just serviced at Masport. For another 1400 I have a stage II (500HP) Performabuilt tranny on layaway. You could give me the money for it and I could pay it off and have Performabuilt ship it to any location you would like. Or maybe Performabuilt will allow some sort of transfer and you can manage the transaction.
Im not sure what other info you would like on the suspension, but its a complete UMI setup(Red), I think most of the stuff is Single adjustable. The TQ Arm is relocated off the Auto tranny also. The springs were purchased from someone on this site that aquired them from GMMG and the shocks are bilstein HD's. It aslo has the 1LE front and rear sways with a Hotchkis STB. The 3 Point UMI SFC were bolt ins with the ends welded @ D'Agostino Racing.
The brakes are WS6store slotted rotors with earls SS lines.
Hope that was what your looking for. If not just ask away and Ill let you know.
Shane
The tranny is a stock A4 with a Vig 3200 stall and B&M cooler. The rear end has 3.42 gears, new seal & oil and a summit racing aluminum diff cover with girdle supports that was just serviced at Masport. For another 1400 I have a stage II (500HP) Performabuilt tranny on layaway. You could give me the money for it and I could pay it off and have Performabuilt ship it to any location you would like. Or maybe Performabuilt will allow some sort of transfer and you can manage the transaction.
Im not sure what other info you would like on the suspension, but its a complete UMI setup(Red), I think most of the stuff is Single adjustable. The TQ Arm is relocated off the Auto tranny also. The springs were purchased from someone on this site that aquired them from GMMG and the shocks are bilstein HD's. It aslo has the 1LE front and rear sways with a Hotchkis STB. The 3 Point UMI SFC were bolt ins with the ends welded @ D'Agostino Racing.
The brakes are WS6store slotted rotors with earls SS lines.
Hope that was what your looking for. If not just ask away and Ill let you know.
Shane
02-12-2009, 11:43 AM
#10
TECH Apprentice
iTrader: (13)
Join Date: Dec 2007
Location: Williamsport, MD
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
I am interested. I would like to see the dyno sheet for it and some interior shots. You can PM me them if you want. also any idea how many miles are on the motor and tranny?
02-12-2009, 12:24 PM
#11
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Miami Fl.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
50K on the tranny and motor when they were from the '00 TA donor car, Ive put maybe 3-5000 on it since december of '07. I can get all the dyno's and interior, engine and some pics of the hole on the side.
02-12-2009, 05:29 PM
#12
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Miami Fl.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Here are the pics of the hole. I will take better ones and some interior and engine bay shots tomorrow. If you need or want anything specific just let me know.
Shane
And no I NEVER smoke in my any of my cars, just in case anyone was wondering.
02-12-2009, 06:12 PM
#13
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Miami Fl.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
This is a cold start idle video:
Im in the process of uploading about 4 more..its slow, gimme some time
Im in the process of uploading about 4 more..its slow, gimme some time
Last edited by snatch; 02-12-2009 at 07:54 PM.
02-12-2009, 08:05 PM
#16
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Miami Fl.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Yup everythin shows up as a V6..except the exhaust note!! I bought the stock engine and tranny with roughly 50K on it, Ive put 3-5K on it the past year since having the heads and cam and all the other stuff installed.
I also have the cam card if anyone is wondering. The hockey sticks are decals from third gen decals.
Shane
I also have the cam card if anyone is wondering. The hockey sticks are decals from third gen decals.
Shane
02-12-2009, 08:24 PM
#18
On The Tree
Thread Starter
iTrader: (4)
Join Date: Nov 2003
Location: Miami Fl.
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Cam:
232/234, .595"/.598" on a 112+4
Heads:
GM 5.3l Based Cores
Smaller Combustion Chambers For 10.75:1 Compression
Stainless Steel 2.02"/1.575" Valves
PRC Double Spring Kit Complete With
Springs, Titanium Retainers, Seats, & Seals
232/234, .595"/.598" on a 112+4
Heads:
GM 5.3l Based Cores
Smaller Combustion Chambers For 10.75:1 Compression
Stainless Steel 2.02"/1.575" Valves
PRC Double Spring Kit Complete With
Springs, Titanium Retainers, Seats, & Seals
