Dream Car... '02 SOM SS heavily modded!
#1
TECH Enthusiast
Thread Starter
iTrader: (21)
Join Date: Oct 2005
Location: New Bern, NC
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm looking at the possibility of selling the car in the near future. Its been a fun and amazing project to work on but I'm wanting to go a different route now. The car has 14,7XX miles on it now and all the motor work was done by Rapid Motorsports. Last dyno run it did 474 rwhp 413rwtq through a Moser 12 bolt and 4.30 gears!
SOLD
The list of mods is quite extensive:
Motor work (done by Rapid)
Stock short block with ARP main studs and ARP rod bolts
Flycut stock pistons (approx .065”)
242/250 0.578/0.578 109 LSA cam
Crane Gold quick lift 1.8 rockers. Effective cam lift 0.612
Rapid LS6 heads. Steel valve seats, 2.05 intake, 1.60 exhaust. Crane dual springs(no shims, .075” preload). Flow is about 330cfm @ 0.650 Chamber: 59cc. CR is around 11.2:1
Moly pushrods (7.200”)
Stock lifters
Fast 90mm intake and TB/ Intake ported and port matched
Ported LS6 oil pump
Rollmaster Double roller timing chain
FAST billet fuel rails
Drivetrain
Pro 5.0 with UMI short stick
Ram VDS 910 Clutch
Denny's Nitrous Ready Driveshaft
Moser 12bolt with 4.30 gears
SLP line lock
Exhaust
Kooks Stainless 1 3/4 and ORY
Corsa with Mecham tips
Suspension
BMR tubular K member/ lower A arms
Spohn subrame connectors/torque arm/ adj panhard/ LCA's/ LCA reloc brackets
Hal 12way front shocks front
Bilstein HD rear shocks with BMR springs
Wheels
17X9.5 Fikse FM-5 (38mm offset) front with 275/40/17 BFG KDW’s
17X11 Fikse FM-5 (43mm offset) rear with 315/35/17 BRG drag radials
Also included
15X3.5 Weld draglite with spacers and Moroso DS-2 tires
15X8 Weld draglite with 27/11.5/15 Hoosier QTP
NOTE: Drag tires were just put on this month
Interior
3A Racing seats drivers and pass (have sliders and recline)
Custom Cromo 6pt roll cage with swingout doors (very snug fit)
Autometer shift light
Custom switch panel in ashtray
MISC
Harlan 2step custom painted
All sorts of appearance mods throughout the car!
NOTE: Also will come with several boxes of stock parts
![](http://i35.photobucket.com/albums/d180/lethl_ss/Dyno/02.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0766.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0767.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0773.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0775.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/IMG_0734.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/IMG_0733.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/IMG_0721.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/crane_rockers.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/piston_cut2.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/chamber.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/exhaust_port1.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0786.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0784.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0748.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Interior/IMG_0521.jpg)
SOLD
The list of mods is quite extensive:
Motor work (done by Rapid)
Stock short block with ARP main studs and ARP rod bolts
Flycut stock pistons (approx .065”)
242/250 0.578/0.578 109 LSA cam
Crane Gold quick lift 1.8 rockers. Effective cam lift 0.612
Rapid LS6 heads. Steel valve seats, 2.05 intake, 1.60 exhaust. Crane dual springs(no shims, .075” preload). Flow is about 330cfm @ 0.650 Chamber: 59cc. CR is around 11.2:1
Moly pushrods (7.200”)
Stock lifters
Fast 90mm intake and TB/ Intake ported and port matched
Ported LS6 oil pump
Rollmaster Double roller timing chain
FAST billet fuel rails
Drivetrain
Pro 5.0 with UMI short stick
Ram VDS 910 Clutch
Denny's Nitrous Ready Driveshaft
Moser 12bolt with 4.30 gears
SLP line lock
Exhaust
Kooks Stainless 1 3/4 and ORY
Corsa with Mecham tips
Suspension
BMR tubular K member/ lower A arms
Spohn subrame connectors/torque arm/ adj panhard/ LCA's/ LCA reloc brackets
Hal 12way front shocks front
Bilstein HD rear shocks with BMR springs
Wheels
17X9.5 Fikse FM-5 (38mm offset) front with 275/40/17 BFG KDW’s
17X11 Fikse FM-5 (43mm offset) rear with 315/35/17 BRG drag radials
Also included
15X3.5 Weld draglite with spacers and Moroso DS-2 tires
15X8 Weld draglite with 27/11.5/15 Hoosier QTP
NOTE: Drag tires were just put on this month
Interior
3A Racing seats drivers and pass (have sliders and recline)
Custom Cromo 6pt roll cage with swingout doors (very snug fit)
Autometer shift light
Custom switch panel in ashtray
MISC
Harlan 2step custom painted
All sorts of appearance mods throughout the car!
NOTE: Also will come with several boxes of stock parts
![](http://i35.photobucket.com/albums/d180/lethl_ss/Dyno/02.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0766.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0767.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0773.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0775.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/IMG_0734.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/IMG_0733.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/IMG_0721.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/crane_rockers.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/piston_cut2.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/chamber.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Engine%20Bay/exhaust_port1.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0786.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0784.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Exterior/IMG_0748.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Interior/IMG_0521.jpg)
![](http://i35.photobucket.com/albums/d180/lethl_ss/Interior/IMG_0524.jpg)
Last edited by LETHL_SS; 04-04-2006 at 12:57 AM.
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow!!!!!!!!!!!!! Is all I can say.
That is exactly what I'am looking for. All I need to do is sell my Turbo Buick.
WILL SOMEONE PLEASE BY MY BUICK!!!!!!!!!!!!!!!!!!!!!!!!!! Pretty Please
That is exactly what I'am looking for. All I need to do is sell my Turbo Buick.
WILL SOMEONE PLEASE BY MY BUICK!!!!!!!!!!!!!!!!!!!!!!!!!! Pretty Please
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#6
TECH Enthusiast
Thread Starter
iTrader: (21)
Join Date: Oct 2005
Location: New Bern, NC
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by AINTNO8
Wow!!!!!!!!!!!!! Is all I can say.
That is exactly what I'am looking for. All I need to do is sell my Turbo Buick.
WILL SOMEONE PLEASE BY MY BUICK!!!!!!!!!!!!!!!!!!!!!!!!!! Pretty Please![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
That is exactly what I'am looking for. All I need to do is sell my Turbo Buick.
WILL SOMEONE PLEASE BY MY BUICK!!!!!!!!!!!!!!!!!!!!!!!!!! Pretty Please
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#7
Staging Lane
Join Date: May 2005
Location: Biloxi, MS
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Best of luck Tommy... This car is simply amazing seen it several times and you will not find another car like it. Keeps it very very clean. New buyer will not be disappointed.
Later Brandon
Later Brandon