Phoenix F-Bodies FTW! *Week 3 6-05-06*
#41
TECH Fanatic
iTrader: (19)
Im planning on a cam only car that makes alot of power and that is a chunky idle so it can really be heard that it does in fact have a big cam. But at the same time i would use it as almost my daily driver and once tuned, i want it to get decent gas mileage and be able to idle with out surging or dying out on me. i want it to make power with out having it spinning too much past 6200.
#43
Ok if you're going cam only you know you're going to be needing valve springs. pushrods, ect...The big boys generally require a ton of gear and RPM to see the power, and without a phenominal tune, they can be a bit of a chore to drive around daily on the streets...You might be able to put up with it, but you're giving up some lowend for all that high RPM power...
Now since you're looking for a nice lope sound from a big cam, I'd recommend something with decent duration, and a tight LSA...That will give you more overlap, and the chunky sound you're looking for...
I'm sure you've heard of EdC on these boards...He makes some nasty custom cams...Before you do anything as far as purchasing, give him a call or email and tell him what it is you want, and he will do it...Or you can look here...
http://www.flowtechinduction.com/packages.htm
Also, another option is Thunder Racing, give them a call with what you want...And they can do a kickass LSK lobe profile that will get you the torque and power that you're looking for...And that nice lopey sound....
Personally, i'd go with a 224/228 .6xx/.6xx on a 110LSA or less...
Now since you're looking for a nice lope sound from a big cam, I'd recommend something with decent duration, and a tight LSA...That will give you more overlap, and the chunky sound you're looking for...
I'm sure you've heard of EdC on these boards...He makes some nasty custom cams...Before you do anything as far as purchasing, give him a call or email and tell him what it is you want, and he will do it...Or you can look here...
http://www.flowtechinduction.com/packages.htm
Also, another option is Thunder Racing, give them a call with what you want...And they can do a kickass LSK lobe profile that will get you the torque and power that you're looking for...And that nice lopey sound....
Personally, i'd go with a 224/228 .6xx/.6xx on a 110LSA or less...
#47
trash can----1
fender-------0
ya there was a big dust storm and it decided to throw my trash can into my fender wich now looks like Mikes hood....Anybody know of a good body/paint shop?
fender-------0
ya there was a big dust storm and it decided to throw my trash can into my fender wich now looks like Mikes hood....Anybody know of a good body/paint shop?
#48
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2004
Location: Surprise
Posts: 1,647
Likes: 0
Received 0 Likes
on
0 Posts
The cam you mentioned earlier fits very well with what you want. You are leaving a little on the table by not wanting to rev the motor hard. If you are willing to spin the motor a little higher you could look into some of the Futural (sp?) cams. I hear that they are very streetable and put down very good numbers. Smartass#### has the f13 in his car and it put down 400 I believe.
Chris
Chris
#51
Banned
iTrader: (7)
Join Date: Sep 2005
Location: PHX az
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by thatSR20kid
trash can----1
fender-------0
ya there was a big dust storm and it decided to throw my trash can into my fender wich now looks like Mikes hood....Anybody know of a good body/paint shop?
fender-------0
ya there was a big dust storm and it decided to throw my trash can into my fender wich now looks like Mikes hood....Anybody know of a good body/paint shop?
your like eugine on hey arnold, nothing but bad luck, maybe cuz its 666 lol
#54
TECH Enthusiast
iTrader: (13)
Join Date: Jul 2005
Location: Torrance, CA
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NBMgreg
ruben, that sucks you decided to move again, for the 3rd time lol... before you go, i need those damn jackstands i keep forgetting about
#56
Banned
iTrader: (7)
Join Date: Sep 2005
Location: PHX az
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
lol, he did that himself? how did that turn out? does he always do that or did you guys dare him to do the !eyebrow mod
ruben, we should all get together and have a good going away party for you, one where you can get drunk as you want, and not have to worry about anything, that would be cool.
ruben, we should all get together and have a good going away party for you, one where you can get drunk as you want, and not have to worry about anything, that would be cool.
#59
TECH Enthusiast
iTrader: (13)
Join Date: Jul 2005
Location: Torrance, CA
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 00cls1camaross
so ruben your leaving in a month.... too bad i am not in phx or i would buy your stuff
have fun with the emmision *****
have fun with the emmision *****
#60
TECH Enthusiast
iTrader: (13)
Join Date: Jul 2005
Location: Torrance, CA
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NBMgreg
lol, he did that himself? how did that turn out? does he always do that or did you guys dare him to do the !eyebrow mod
ruben, we should all get together and have a good going away party for you, one where you can get drunk as you want, and not have to worry about anything, that would be cool.
ruben, we should all get together and have a good going away party for you, one where you can get drunk as you want, and not have to worry about anything, that would be cool.