Wheels & Tires Forged | Billet | Cast | Radials | Slicks

Started painting my wheels today.....Finished now! Pictures!

Thread Tools
 
Search this Thread
 
Old 04-17-2010 | 08:59 PM
  #1  
Endersshadow's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Aug 2009
Posts: 378
Likes: 0
Default Started painting my wheels today.....Finished now! Pictures!

I got one finished. Here's a picture:



It turned out pretty good so far. I'm going to let it sit overnight and finish the other three tomorrow.

I was wondering what you guys think of painting my center caps? They are the cheap plastic ABS ones. Do you think the paint will stick well to it? It's duplicolor wheel paint.

I'll post more pictures tomorrow when I finish and get them on the car.

Last edited by Endersshadow; 04-18-2010 at 08:48 PM.
Old 04-17-2010 | 09:59 PM
  #2  
mferreira's Avatar
Registered User
 
Joined: Feb 2010
Posts: 27
Likes: 0
From: Southeastern MA
Default

Nice job man, I have the same wheels on my red 94 firebird and I was thinking of doing something similar. Are you going to leave the lip painted? I think they would look great with the outermost lip (the part the weights usually attach to) polished. Post pics of the finished product please!
Old 04-17-2010 | 10:00 PM
  #3  
DaynNight's Avatar
Staging Lane
iTrader: (5)
 
Joined: Apr 2010
Posts: 79
Likes: 0
Default

bad ***
Old 04-17-2010 | 10:02 PM
  #4  
mferreira's Avatar
Registered User
 
Joined: Feb 2010
Posts: 27
Likes: 0
From: Southeastern MA
Default

forgot to add... I think painting the centercaps would look pretty good. You could also get a set of black ABS caps used on the chrome 16x8's. I switched mine from the silver ones you have to those and it made the wheels look MUCH better IMO.
Old 04-17-2010 | 10:04 PM
  #5  
dgcustomz's Avatar
TECH Resident
15 Year Member
iTrader: (128)
 
Joined: Aug 2008
Posts: 852
Likes: 18
From: FORT WORTH
Default

it actually looks good.. what color is your car?
Old 04-17-2010 | 10:24 PM
  #6  
Endersshadow's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Aug 2009
Posts: 378
Likes: 0
Default

My car is red. I painted the lip because I have one wheel with a polished lip already and didn't want to polish all the lips on the wheels. I'm lazy. lol. This is just temporary anyways. Thanks for the kind words. Makes me feel like the 8 hours I put in today were actually worth it. I forgot to wear gloves while I sanded the clear off and now most of my fingers are worn down to the last layer of skin....It sucks horribly.
Old 04-17-2010 | 11:42 PM
  #7  
kierstyn's Avatar
TECH Enthusiast
iTrader: (5)
 
Joined: Sep 2007
Posts: 679
Likes: 1
From: TN
Default

I did the same to my stock wheels they turned out great. I have seen a red formula running around my area that have them black with a red pin-stripe around the lip.
Old 04-18-2010 | 12:22 AM
  #8  
black_sheep454's Avatar
12 Second Club
iTrader: (9)
 
Joined: Feb 2007
Posts: 1,469
Likes: 0
From: Lebanon, Mo.
Default

Looks good, now get some pics of them on the car. I love seeing red cars with gray wheels, makes me want to do mine
Old 04-18-2010 | 12:29 PM
  #9  
808z28camaro's Avatar
TECH Regular
 
Joined: May 2009
Posts: 468
Likes: 0
From: Honolulu, HI
Default

Looks Good. I would shoot 3-4 coats of clear, let dry for a day, then wet sand with 2000/ 2500 grit, then buff with a swirl/haze remover. would look like factory painted rims. Very High Gloss.
Old 04-18-2010 | 12:40 PM
  #10  
schram1124's Avatar
Teching In
 
Joined: Sep 2009
Posts: 31
Likes: 0
From: blackstone ma
Default

what did you use for paint
Old 04-18-2010 | 05:46 PM
  #11  
Endersshadow's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Aug 2009
Posts: 378
Likes: 0
Default

I used Duplicolor wheel paint. I'm done painting the wheels...Just letting them dry now. I'll post pictures later.
Old 04-18-2010 | 06:00 PM
  #12  
ls1jorge's Avatar
TECH Regular
iTrader: (5)
 
Joined: Nov 2009
Posts: 478
Likes: 1
From: San Antonio, TX
Default

badass man is that color gunmetal or dark gray?

im thinkin about painting my zr1s gunmetal with chrome lip & chrome center cap but idk i dont want to damage the rim ill prolly have a bodyshop do it
Old 04-18-2010 | 08:47 PM
  #13  
Endersshadow's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Aug 2009
Posts: 378
Likes: 0
Default

So I'm done.....Thank god. Only took me about 14 hours total. lol. I messed up a bit and ran into some setbacks. I am also pretty sure I got high off the damn fumes. lol. Anyways...here are some pictures. They are pretty horrible as I tried to race the sun and pretty much lost. Oh well. I'll take some more tomorrow. Oh and the color is called Graphite I believe. Also, one quick question.....Will these SlP centercaps fit my wheels? http://www.streetperformance.com/ART...83/80003-1.jpg





Old 04-18-2010 | 09:38 PM
  #14  
PGUFF's Avatar
Launching!
iTrader: (12)
 
Joined: Apr 2008
Posts: 280
Likes: 0
From: Columbia, SC
Default

Hard to tell how they look until the sun is shining on them. That ought to bring the color out better.
Old 04-19-2010 | 05:11 PM
  #15  
Endersshadow's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Aug 2009
Posts: 378
Likes: 0
Default Better pictures

Here's some pictures I took today











I love the way my car looks now. It made it look so much better. It was well worth the effort and money. The car is super dirty in the pictures as I haven't had time to wash it and now I can't for a few days while I let the paint set in more.
Old 04-19-2010 | 05:16 PM
  #16  
1BADTALS1's Avatar
12 Second Club
iTrader: (4)
 
Joined: Oct 2005
Posts: 663
Likes: 0
From: Racine WI
Default

looks good
Old 04-19-2010 | 05:26 PM
  #17  
PGUFF's Avatar
Launching!
iTrader: (12)
 
Joined: Apr 2008
Posts: 280
Likes: 0
From: Columbia, SC
Default

I like them, much better than stock
Old 04-20-2010 | 01:40 PM
  #18  
mferreira's Avatar
Registered User
 
Joined: Feb 2010
Posts: 27
Likes: 0
From: Southeastern MA
Default

I think they look great, def. an improvement over the silver
Old 04-20-2010 | 02:31 PM
  #19  
01ssreda4's Avatar
TECH Senior Member
iTrader: (96)
 
Joined: Aug 2007
Posts: 24,241
Likes: 83
From: Turnin' Wrenches Infractions: 005
Default

Nice job, I would have liked to see a before and after direct comparison though.
Old 04-20-2010 | 05:17 PM
  #20  
Johnnystock's Avatar
TECH Addict
10 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 2,675
Likes: 38
From: Canada
Default

way better!!



All times are GMT -5. The time now is 12:47 PM.