iamnitrox

I think they might make the car look a little more agressive. Does anyone have any pics of the trans am rims with wheel spacers? I would like to see how they look. I just think that the stock wheel location sets the wheels about 1/5" too far into the fender.

Any pics appreciated

BigJls1

1/5 of an inch, hhmm.

sixvi6-camaro

iTrader: (9)

1/5" of an inch is nothing. you won't even notice it. My Camaro has 1" spacers on the rear. Gives it a 315's in the rear stance without the huge weight penalty and cost most of those 11" wide wheels and tires carry.

ErikElvis

iTrader: (1)

Swap them studs. Dont want wheels runnin away from ya.

sixvi6-camaro

iTrader: (9)

no need to swap studs with adapter/spacers..



If you use These style spacers though for sure get ARP studs. I run these 3/8" spacers for my skinnies.

Judas

I have a couple examples of 1" spacer aswell. Black vert and white Ws6 have 1" spacer on factory rim.

Donohue96M6Z28

iTrader: (64)

1inch spacers ???... i have old pics with 17x9-9.5 wheels with 1in spacers and they look better...I just dont feel like going to my photobucket to search for them... They do look better IMO, but they set out. and the wheels arent that wide so it looks diff from diff angles.

SUX2BU

iTrader: (14)

I have some 1" ones (25.4mm) i bought them for some C6 wheels but sold the wheels before i got the spacers. Never mounted. bought them for $58 on ebay. will take $50 shipped.

sexasomniac

Not a T/A but I have 1" adapters in the rear and 5/16" spacer in the front with meaty 255/55 tires.

NHRAMAN

iTrader: (1)

I have 3/4" wheel adapters and 285's in the rear. I would not bother putting anything on the fronts. Looks good the way it came....I actually bought the adapters so I could run my ROH 5 SPOKES......but got sick of them and tried leaving the spacers on and liked it..

guy7bmwm83

iTrader: (5)

Do you happen to have close up pictures with your 3/4" adapters on?

davy

ok guys, stock ws6, 17x9 zr1 wheels all around. want something that will make the rears stick out as much as a 315 on a 17x11. what type and size spacer exactly do i need? send a link to a ebay ad or something?

guy7bmwm83

iTrader: (5)

Here is a good thread for you. You can order them directly from H&R's site or find them elsewhere for cheaper.