Going to build a stealth box!
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a max caliber 12" dvc sub, and it recommends at least 1 cu.ft and a 2.8" port diameter (with 7"3 in length). I believe most people here average around .7 cu. ft. with their boxes...with this suffice for this sub?
#2
Banned
iTrader: (65)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Honestly, no. If it recomends "at least" 1.0cu.ft. of airspace volume that's the minimum requirement. It will make sound in a smaller enclosure but it won't hit like it's supposed to. Have a look at this installation that Mike did: https://ls1tech.com/forums/wiring-stereo-electronics/766064-complete-custom-system-install-93-ta-i-did-lots-pics.html
Please note how much airspace volume that enclosure is using. It extends not only forward but down into the spare tire well.
You may not need quite that much airspace volume but most 12" subs require much more airspace volume than a 10" sub. That's why prefab stealth enclosures are always 10" subs. Even some 10" subs require more than .6-.7 though.
The up side is since your building your own...you can make it have more airspace volume!! It will take more effort but it can be done...you'll just have to either build it on the passenger side or extend it up into the side of the hatch area behind the plastic on the drivers side. Good luck!!
Please note how much airspace volume that enclosure is using. It extends not only forward but down into the spare tire well.
You may not need quite that much airspace volume but most 12" subs require much more airspace volume than a 10" sub. That's why prefab stealth enclosures are always 10" subs. Even some 10" subs require more than .6-.7 though.
The up side is since your building your own...you can make it have more airspace volume!! It will take more effort but it can be done...you'll just have to either build it on the passenger side or extend it up into the side of the hatch area behind the plastic on the drivers side. Good luck!!
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for the info, I am debating trying what mike did, or trying on the driver side. It would be nice to retain my spare tire. Then again that much airspace would kick ***.
Has anyone tried extending up above the wheel well on the drivers side??
Has anyone tried extending up above the wheel well on the drivers side??
#5
TECH Resident
iTrader: (3)
Join Date: Dec 2002
Location: Showing Italians the power of LS1
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When I made my own fiberglass drivers side stealthbox, I tried to go up as far forward as possible, but you can only get .02-.05 extra by fiberglassing up to the rear speaker/ seatbelt retractor. Be careful when 'glassing down into the well, as you cannot go down as far as you would like, because you would not be able to remove the hardened 'glass; unless you made a two-section box like Mike did in his install. If your going to go through that much trouble building a box (two-section) I would just build it on the pass side. I am using a 12" on the drivers side; the box is .72 cubic feet, the sub takes up something like .2, but the sub is designed for .5 to 1.0 cube sealed enclosures. It gets down pretty low, but I feel it would've sounded much better had I ditched the spare and went w/ the pass. side box like Mike did. here are a few install pics I snapped of my box, as I was making it:
![](http://www.mobile-effects.com/albums/album05/Subpieces.jpg)
![](http://www.mobile-effects.com/albums/album05/boxfab1.jpg)
![](http://www.mobile-effects.com/albums/album05/subpeanuts.jpg)
![](http://www.mobile-effects.com/albums/album05/Box_previnyl.jpg)
![](http://www.mobile-effects.com/albums/album05/box_vinyl.jpg)
![](http://www.mobile-effects.com/albums/album05/Subpieces.jpg)
![](http://www.mobile-effects.com/albums/album05/boxfab1.jpg)
![](http://www.mobile-effects.com/albums/album05/subpeanuts.jpg)
![](http://www.mobile-effects.com/albums/album05/Box_previnyl.jpg)
![](http://www.mobile-effects.com/albums/album05/box_vinyl.jpg)
![](http://www.mobile-effects.com/albums/album05/Box_finished2.jpg)
Last edited by Snootch; 08-15-2007 at 08:03 PM.
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
that looks nice man, I read your guide awhile back. It's too bad I need more airspace, that would have been the spot I wanted to put it. Owell...i'll just get my CAA activated and I won't have to worry about a spare haha..free unlimited tows! woot
Trending Topics
#13
Banned
iTrader: (65)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by waltonscott
i'll have to pick one of those up, heard they work great. 2 stealth enclosures? How does that sound?
#14
Banned
iTrader: (65)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by transambandit
im going to try and fab up something similar to this
![](http://www.lifeinwidescreen.com/siihp/subbox.jpg)
![](http://www.lifeinwidescreen.com/siihp/subbox.jpg)
#15
Launching!
iTrader: (5)
Join Date: May 2005
Location: Denton, TX
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by transambandit
im going to try and fab up something similar to this
![](http://www.lifeinwidescreen.com/siihp/subbox.jpg)
![](http://www.lifeinwidescreen.com/siihp/subbox.jpg)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Barf](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_barf.gif)
edit: just saw you said you wanted to fab one up like that, which probably means thats not your car....
#16
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by transambandit
im going to try and fab up something similar to this
![](http://www.lifeinwidescreen.com/siihp/subbox.jpg)
![](http://www.lifeinwidescreen.com/siihp/subbox.jpg)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#17
TECH Resident
iTrader: (3)
Join Date: Dec 2002
Location: Showing Italians the power of LS1
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Ls1Envy
Hey Snootch, could you possibly link some good sites on the basics of building a glass box. thanks!
http://www.ajquick.com/cars/tutorials/fiberglass.php
http://fbodyaudio.com/articleviewer....cle=glass.tech
http://chris.pfharlock.com/glass/
#18
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by waltonscott
That's sick...Did you do up the measurements yet? My sub depth is big, but that would be neat to pull off. I'd prolly put my amps on an amp rack instead, but damn that's an innovative approach for air space. ![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#19
11 Second Club
iTrader: (7)
Join Date: Sep 2005
Location: Eagle Pass, TX
Posts: 1,930
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by transambandit
im going to try and fab up something similar to this
![](http://www.lifeinwidescreen.com/siihp/subbox.jpg)
![](http://www.lifeinwidescreen.com/siihp/subbox.jpg)
I like the idea of using that empty space, however I wouldn't want someone to see all that back there and break into my car.
#20
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by PERFECT Z28
I like the idea of using that empty space, however I wouldn't want someone to see all that back there and break into my car.