Forum Discussions
GENERATION III INTERNAL ENGINE
Hi everyone. Just been doing some research on intake runner length for my engine build. if I make peak torque in my ls1 at 4800rpm I need a runner ...
Not using MAF, have a bung in Huron Speed cold air plumbing for IAT sensor. Anyone Please recommend a part number for decent two wire IAT sen...
Dash on 1998 Firebird is Cracked
I took it to a body shop and they said replacements are no longer available. They said the dash would have to be removed in order to repair it. But ...
a nother 92 vs 102 mm throttle body dyno test
well, since we had the set up and the thing able to test the two (92 and 102) throttle bodies relatively easy, why not. So you know, we made no fuel ...
4L70E low mile rebuild 3-4 slipping issues
Check the trans fluid to see if it is burnt.
GENERAL MAINTENANCE & REPAIRS
Power steering fluid always nasty
I do the turkey baster method for this as well, but I only do that every two years. However, two years time only equals about 500-600 miles for me, s...
Latest News
Barely Driven Camaro IROC-Z Will Transport You Back to 1985
By: Verdad Gallardo | May 9, 2024
Mecum Indy to Feature Star-Studded Corvette Ensemble
By: Brett Foote | May 8, 2024
LS Fest West 2024 Recap
By: Joe Kucinski | April 30, 2024
Meet the Spada Codatronica. It Used To Be a C6 Z06.
By: Patrick Morgan | April 25, 2024
Blue Flame Exhaust From Stock Z06? Yes, It’s Possible!
By: Patrick Morgan | April 23, 2024