Duffster

iTrader: (103)

BTW, you need to be VERY careful when disassembling this. . .and soldiering this. . .and reassembling this. . .

Lots of little things you can do wrong, and then, it gets expensive

And then, since I can't leave well enough alone, did the ASR and foglight switch modifications also. Replaced the original bulbs w/7000 blue LEDs. Will have pictures of that later. basically just like the ones on Keliente's site here. . . http://www.keliente.com/switches.htm

Had flash on. . .


Bright little buggars ehh?


Package as it stands currently. . .more to come!


I have no life.


After posting this on a local board last night, had a friend hit me up to do his 99 TA tonight. Did the odo/trip meter swapout in about 70-80 minutes start to finish! TAs are SOOOO much easier than Camaros because of the dash setup!

elanorss

iTrader: (1)

Thats tight. how long does it take to do a camaro?? said the ta was quicker. wish i was closer to you. im about 9 hrs away. would love to have that done to my camaro. great lookin change.

Gun5

iTrader: (37)

how'd u get your headunit to stick in there straight my kenwood always slides "into" the dash

Ehatcher

iTrader: (1)

Excuse me for my ignorance with the camaro guages ... but didnt they have a "film" behind to give the orange glow? or is that only with the T/A? If i am anywhere near correct could you post up on how you removed the film? i read that replacing the bulb wont help. Cluster looks sick though man!

Duffster

iTrader: (103)

ElanorSS, took me about 2 hours start to finish for my Camaro having not done it before. The gauges for the TA/Firebirds pops out easier over the column.

Gun5, ALOT of finageling(screwing around w/the fitment and custom cutting a bracket to hold the stuff together). Made a post about it some time ago. https://ls1tech.com/forums/showthrea...hlight=humount

Ehatcher, no film. Orange LEDs w/a piece of frosted plexi. Did a friends T/A last night and had same.

DwDrummer

iTrader: (31)

Very nice looking! Good job!

Derek

CJDZ24_Z28

iTrader: (75)

always good to see something different

keliente

iTrader: (22)

That looks much better!!

High Pressure

iTrader: (8)

thats sweet!!

Duffster

iTrader: (103)

More to go! YOUR FAULT!

LS1obsession

The film is only on the t/a's, and it is only on the actual gauge overlay and not the odometer. You cannot successful remove the film. You can try using acetone, but it will turn out like ****.

Duffster, do you have LEDS in your gauges?

Duffster

iTrader: (103)

Not yet. going to go w/blue lights in the gauges themselves.

Dave1970

iTrader: (2)

Diffuser,
Just did the odometer LED mod. My odometer lights ups but the mileage and trip numbers are not showing up? Any ideas?

mycamaroSS

iTrader: (4)

dude that's tight i might do that tomorrow

Pro-Mo

Are there LEDs that can make them "oranger"

Duffster

iTrader: (103)

Basically, you've probably got the rubber walls misaligned w/the clear glass. If you look at it VERY VERY closely, you can see where the impressions on the rubber are and try your damnedest...(is that spelled right) to realign it. GOOD LUCK!

Take your time, works well. Took me two hours for mine and a night later, about 1 hour for a friend.

I suspect you can get them oranger w/brighter orange LEDs. Good luck.

Camaro Ryder KV

iTrader: (12)

duff, simply awesome!

ps
the ground effects are off for the winter, we already had a few bad snows, i am so glad i took em off!

3.8to6.0

iTrader: (10)

Is there a write-up for this somewhere?

Dave1970

iTrader: (2)

3.8to6.0, Here's some related links for the mods.
http://www.stevendbrown.com/Steering...oControls.html
http://www.ledgauges.com/id26.html
http://www.evlls1.com/interiorlighting.html
http://www.evlls1.com/ls1.html
http://www.keliente.com/LED.htm
https://ls1tech.com/forums/showthrea...=Blue+Odometer
https://ls1tech.com/forums/showthrea...=Blue+Odometer
Hope this helps, there's alot of others that you can find using the search with keywords such as blue LEDs, LED mod, Blue gauges, etc.

99zman

iTrader: (23)

that looks killer.