Trans am w/zo6 ducts
#1
Trans am w/zo6 ducts
has anyone put the zo6 rear brake ducts on a trans am? i have z06 rims which led me to wondering what they would look like. Even if they look awesome i dont know if id do it cause it kinda be imitation i think with both the rims and ducts. Or maybee itd be a nice theme and i would go ahead and put z06 mesh in the front brake ducts and side vents. Any thoughts? opinions? anyone seen this done or have pics? Any photochoppers wanna help me out?
#2
Originally Posted by 530transam
has anyone put the zo6 rear brake ducts on a trans am? i have z06 rims which led me to wondering what they would look like. Even if they look awesome i dont know if id do it cause it kinda be imitation i think with both the rims and ducts. Or maybee itd be a nice theme and i would go ahead and put z06 mesh in the front brake ducts and side vents. Any thoughts? opinions? anyone seen this done or have pics? Any photochoppers wanna help me out?
#3
there just isn't enough room to fit them comfortably on a ta, i think. look at where the door is near the rear fender and lower ground effect. no room to really put it there whereas the z06 has a lot more free space because of the body design. no wudduh mean?
i was thinking about this the other day too, so i chimed in
i was thinking about this the other day too, so i chimed in
#6
Originally Posted by Convinced
Been there done that.. like 2 years ago...
Won't work..
Won't work..
#7
There is a guy here in Anchorage and bought a couple of the ducts to put on the his 01 SS and it wouldnt fit due to room. He ended up putting them on his Silverado SS. It works with those and looks pretty good too.
Trending Topics
#9
are you talking about C5 z06 ducts or C6 Zo6 ducts? the C5 ones dontlook like they could ever fit. but the C6 ones look like they could. Anyone skilled at photoshop can use this and my car if you want.
#14
im not installing them for functionality. I just wanted to know what theyd look like for the sake of looks. And yes, sts had a trans am that the turbo was fed through the side but if i remember correcltly morgan motorsports made the side skirts or maybe it was a vizage peice off a camaro cause back then there was no vizage kit for a trans am. But dont quote me
#18
TECH Fanatic
iTrader: (8)
Joined: Oct 2005
Posts: 1,419
Likes: 1
From: Holland Twp/Milford, New Jersey
that duct in the pic is the same proportions as an authentic Z06 duct, and that's the biggest i can make it without overlapping the door/rear wheel. i CAN make it bigger, or even take up the entire side of the 1/4 panel, but it would look entirely different than the original.
#20
TECH Fanatic
iTrader: (8)
Joined: Oct 2005
Posts: 1,419
Likes: 1
From: Holland Twp/Milford, New Jersey
here's another pic. i modified this duct A LOT to fit flush. freakin photobucket isnt working for me right now so all these pix are smaller than i want them to be. i'm forced to use my facebook account which is condensing them.