New Hooker 1968-72 A-Body LS Swap System Preview
#405
#407
#408
Yup I have the same problem, they sent me an RMA and I had to buy a new set which have not arived yet. I am able to ise them for mock up until the correct ones get here. Mine are the stock position.
#410
Those are the forward bias brackets, which is part number 71221006HKR. The rear bias brackets are part number 71221007HKR; if you ordered the later of the two then they sent you the wrong ones.
#411
Yep they sent the wrong ones, I'm waiting for them to return my call so that I can get the right brackets.
#413
Their customer service sucks, I've been on hold for an hour and I left my number for a call back and I'm still waiting. It sucks to wait a month for something only to get shipped the wrong product.
Last edited by lawrenq; 04-09-2016 at 08:27 AM.
#414
Teching In
iTrader: (2)
Join Date: Mar 2007
Location: Arkansas
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
i just got a smoking deal from the reseller because they goofed on my order multiple times over multiple days... while they were in giving/fixing mood for discounts for the new stands, i asked about and got the same discount deal on the new LS headers and an engine hoist.
#415
Good for you Cypher, unfortunately I don't have that kind of luck or negotiation skills, but my replacement stock location mounts did arrive today and appear to be correct. So now back to the path forward.
#416
Teching In
iTrader: (2)
Join Date: Mar 2007
Location: Arkansas
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
quick question for those that got their stands or todd. I just got my second set of engine stands, drivers and passengers this time, one has two silver flat rectangle plates and 1 black rectangle plate, the other set has just 1 black rectangle plate and no silver rectangle plates. Are these Shims for crossmember?
black bolts and silver nuts for frame stands; are the silver bolts for motor mounts to block?
black bolts and silver nuts for frame stands; are the silver bolts for motor mounts to block?
#417
quick question for those that got their stands or todd. I just got my second set of engine stands, drivers and passengers this time, one has two silver flat rectangle plates and 1 black rectangle plate, the other set has just 1 black rectangle plate and no silver rectangle plates. Are these Shims for crossmember?
black bolts and silver nuts for frame stands; are the silver bolts for motor mounts to block?
black bolts and silver nuts for frame stands; are the silver bolts for motor mounts to block?
of the package contents, other than the engine brackets, so I can see exactly what you received?
#418
the black spacers are for the trans mount, yes black bolts and washer head nuts are for the Mounts to Frame. The silver bolts and silver spacers I did not use, I believe you are correct for the bolts, and think the longer silver spacers are for the stock cross member. I thought it was in the instructions but the only thing I retained from reading them is they were well written. I used a flexible magnet on the passenger side to get the nuts started and taped up the u-joint adapter on my ratchet because it was to sloppy.