New discoveries for LS1 into Mustangs Swaps
#1
On The Tree
Thread Starter
Join Date: Feb 2002
Location: TX
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
New discoveries for LS1 into Mustangs Swaps
Turns out an LS1 will bolt into a Mustang like it came from the factory...
Using a 4.6L factory Ford K-Member and factory 4.6L Cobra motor mounts, slightly modified, the LS1 slides in and fits great while using the factory GM F-body oilpan and exhaust manifolds.
The factory Ford motor mounts only need to have the 2 front holes rounded out just a little with a drill bit, and the 1 back hole needs to be cut and moved about 1/2" and rewelded.
The factory GM F-body manifolds will clear the steering shaft, but the flange rubs the steering shaft. The flange will need to be cut and have about 1" of pipe installed then have the flange rewelded for enough clearance. That is of course unless you have custom headers made.
The first pic is the driver's side mount, second pic is the passenger side mount, third pic is of the modification needed on the motor mounts, and the fourth pic is of manifold to steering shaft clearance.
**UPDATE about tranny mounts on Page 5...**
Using a 4.6L factory Ford K-Member and factory 4.6L Cobra motor mounts, slightly modified, the LS1 slides in and fits great while using the factory GM F-body oilpan and exhaust manifolds.
The factory Ford motor mounts only need to have the 2 front holes rounded out just a little with a drill bit, and the 1 back hole needs to be cut and moved about 1/2" and rewelded.
The factory GM F-body manifolds will clear the steering shaft, but the flange rubs the steering shaft. The flange will need to be cut and have about 1" of pipe installed then have the flange rewelded for enough clearance. That is of course unless you have custom headers made.
The first pic is the driver's side mount, second pic is the passenger side mount, third pic is of the modification needed on the motor mounts, and the fourth pic is of manifold to steering shaft clearance.
**UPDATE about tranny mounts on Page 5...**
Last edited by Mystic96; 04-04-2005 at 06:53 AM.
#6
On The Tree
Thread Starter
Join Date: Feb 2002
Location: TX
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Smitty
Coool..the pictures look like a SN body.Is this for the SN body cars?
Trending Topics
#9
TECH Senior Member
iTrader: (34)
Mystic is that your car? I really want to do the same swap into my 2000 Gt but I just want to see what obstacles I will need to overcome to get it to work.
All the Ford boys say do a Cobra motor swap but why spend all that cash when I can do a nasty ls1 for about half the price.
All the Ford boys say do a Cobra motor swap but why spend all that cash when I can do a nasty ls1 for about half the price.
#10
TECH Fanatic
Join Date: Feb 2002
Location: Middleburg, FL
Posts: 1,329
Likes: 0
Received 0 Likes
on
0 Posts
well, that's promising as far as the mounts and the K-frame go. I'm planning on doing it to a Fox in ayear or so. In the meantime, I'm just builfing a stupid powered 2.3T to hold me over until I can afford to do the LS1 transplant the right way
#11
TECH Resident
iTrader: (7)
Join Date: May 2004
Location: Merrillville,In (chicago)
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
have a mustang gt, i can tell you that you just made the best move ever...lol i would love to see that car when it is done!
...that is great. good luck, and finally a fast 96-98 NA mustang/cobra for less than a couple hundred thousand dollars.
Louie Panayi
...that is great. good luck, and finally a fast 96-98 NA mustang/cobra for less than a couple hundred thousand dollars.
Louie Panayi
#14
12 Second Club
iTrader: (11)
Join Date: Jan 2005
Location: NC, Charlotte / SC, RockHill
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
I had always dreamed about that kind of swap. Driving a mustang with a chevy heart will be great . Especially that the Camaro`s r so bulky comparing to stangs .
#19
On The Tree
iTrader: (8)
Join Date: Apr 2003
Location: NJ
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01PewterWS6
Another pic for you guys
BTW, I like the intake ducting for the MAF. Did you fab that yourself?
#20
TECH Enthusiast
Join Date: Sep 2003
Location: DFW, TX
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Eric Fischer
Cool car! Great job on the k-member find! I might just have to do one of these conversions yet. Imagine a stripped out coupe weighing probably 2800 lbs with a 500 HP LS1; you're talking easy mid 10's!
BTW, I like the intake ducting for the MAF. Did you fab that yourself?
BTW, I like the intake ducting for the MAF. Did you fab that yourself?
dont know, not mine
Wish it was though,
TOMMY on Dfwstangs, bought Lanes old coupe(LS1 swap)
Bone stock motor,
heres his sig info
83' LS1FOXBODY - coupe 2700lbs w/driver
Best Time :
60' --- 1.57
330 --- 4.54
1/8 --- 7.05
mph --- 95.98
Man I want one bad!