im doing a LS1 into a 69 chevelle.
im running a 4l60E tranny, and all the stock accessories off the f body drive line.

i test fitted and got everything to fit, now im gonna paint the firewall and drop the engine and tranny in for good.

 

LQ4,LS3 heads,turbo 350,9" Ford. Waiting to flow heads on superflow, then port then custom grind cam. Using carb and intake.
Aleck

 

1966 Beaumont rag, was 305 with 700r4
will be lq9 carbed 700r4 no pics yet

 

1971 Chevy C10 Pickup LWB
LS1 Turbo And 6spd

 

https://ls1tech.com/forums/conversio...k-crawler.html

LR4 Into a Hydraulic Rock Crawler

 

mine plane is still in progress but here she is

1955 chevy truck

lm7 - with the edelbrock carb intake w/ control box and a 4l60 ( this part I am not sure will work out if it is carbed ) . The 4l60 was being used with the 350 that was in there before but still trying to get info if the setup will work

 

Has anyone installed a ls1 in a chevy styleline????

 

2004 mazda rx8

LS1 - M6.

swap thread: https://ls1tech.com/forums/conversio...mazda-rx8.html

 

I have a 68 camaro conversion that I have installed a LS7 engine, 850 carb, front distributer setup. Car has went 6.13 at 111 mph in the 1/8 mile to date. Still trying to sort out issues with the car. Engined dynoed at 670 h.p. Stock except with a cam change.

 

I am currently putting a 4.8 into an 84 oldsmobile cutlass. Going carbed with a th350.

 

Hey,

This is a long to short bed conversion that has a full air ride suspension and 13" Baer brakes in the front and back. I've recently decided to ditch the 350 and drop in an:

LS2
T-56
L92 heads
LS3 intake
LS3 tb
LS7 clutch
LS9 ZR1 cam

 

89 BMW 325i
98 LS1/T56

Still working on putting the final pieces together before I pull the BMW drivetrain. Getting excited to have a quick car again.

Chris

 

71 chevelle
ls1/t56 out of a 02 TA ws6

getting everything fitted up now.

Annapolis md.

 

2001 TJ Wrangler
5.7L LS1 from 2004 VY Holden Monaro
6.0L VE Commodore Oil Pan & Exhaust Manifolds
Custom 3" Stainless Mandrel-Bent Exhaust w/Magnaflow Cat & Muffler
4L60E mated to NP-231 Transfer Case
B&M Quicksilver
Novak Electric Fan mated to Custom Alloy Radiator
J10 D60 & D44

my mates car was the guinea pig, the wife's Jeep is next!

 

1986 Monte Carlo SS
LY6 -LSX conversion, 8.5 Rear end
Found a LY6 locally for 250 with a burnt valve. Tearing it apart now. L76 intake, cam swap, LH8 oil pan. ain't figured the rest out yet lol.

 

I'm doing a conversion on this 66' Chevy Van.

I will be putting a 5.3LS with iron block and 4L60E into it.



I'm looking for advice on cams and the latest and greatest performance parts to squeeze around 400 rwhp out of the LS if possible.

Anybody have some advice on what to do with this motor?

 

1987 Jeep Grand Wagoneer
2000 4.8 Vortec; 4l60e

Link to Thread: https://ls1tech.com/forums/conversio...-wagoneer.html

 

I´m in the process of installing a 04 GTO LS1/A4 on my 73 RS camaro...

I´ve started this conversion a few months ago.. just working on weekends.. lots of work.. but i think I´m in the final part.. hopefully this weekend first start

I leave you some pics..

http://s864.photobucket.com/albums/a...n%20my%2073RS/



some mods done before..
Boyds wheels 17 x 8
QA1 front coil overs
Ride-tech Air bar rear system with QA1 coil overs
Rear discs brakes
Recaro racing seats
New leather dash..
..

 

I need input from those in the know. I am just begining the process. I bought an LQ9 with a Magnacharger from a 2003 Suburban. My plan is to use a 4L60E. I have the engine ECM and the engine wiring harness. What do I need to be paying attention for?

 

Just completed this build:

'70 Chevelle SS
LSX 454 from GM Performance Parts
200R4 and 10" converter from CPTtransmisison

Other:
LS7 Single plane intake
Fast EFI
Edelbrock headers and engine mounts