s10 ls1ers
Originally Posted by blazerls1
on the ls2 oilpan,are there any differences in it and the f-body pan?I already have a f-body pan and would love to be able to use it over the truck pan.
https://ls1tech.com/forums/attachmen...chmentid=46684
I think there pretty close together (ls2 and ls7)
Originally Posted by firefighter
Jake which one is the LS2 the one on the block? right?
TECH Resident
Joined: Oct 2004
Posts: 807
Likes: 0
From: TAMPA by way of MIAMI!!!
Yeah I meant to say LS7.
Hey has any body seen that the two new guys from Trucks on Spike TV are putting a V8 in a S-10? I'm not sure what they are using yet though all they said was crate engine.
Hey has any body seen that the two new guys from Trucks on Spike TV are putting a V8 in a S-10? I'm not sure what they are using yet though all they said was crate engine.
TECH Resident
Joined: Oct 2004
Posts: 807
Likes: 0
From: TAMPA by way of MIAMI!!!
thought they were putting the stock 4L60E I know it is essentially a 700R4 but it is gonna have to have a seperate computer so I'm thinking it'll at least be the ram jet hell the muscle car guys are throwin one of those in the Elky.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
This isnt the first time its been done on Trucks...Stacey did it in an S10 Xtreme except on that they used the LS1. It was a quite a few years ago...and they called it the REAL Xtreme S10. I think if you look in the Trucks archives you could find something about it.
J-
J-
Teching In
Joined: Mar 2006
Posts: 17
Likes: 0
Guys, I am actively looking for an engine/tranny and am leaning towards a t56. Will the t56 fit alright in the tranny tunnel?(not sure how much bigger than a 4l60e) I realize it will be more work to install ( considering I already have a 4l60e)
Any opinions?
Any opinions?
Staging Lane
Joined: Feb 2006
Posts: 50
Likes: 0
From: New England
Originally Posted by XtremeDime
i wanna see these headers! they sounds sweet. is it possible to buy ceramic coating in liquid form and spray it on like clearcoat?
Originally Posted by northcoastrides
Duplicolor makes high temp ceramic engine paint in spray cans ,never used any though dont' know how it holds up . you can't beat ceramicoat it's baked on and worth the $ if appearence is important........Hey acehaag you get those headers yet?can't wait to see them.
I got my headers and here are some pics
the passenger side fits without to much trouble but it looks like it is a little bit close to the firewall the driver side looks like it is going to interfere with the steering shaft as you can see in the pic.
the passenger side fits without to much trouble but it looks like it is a little bit close to the firewall the driver side looks like it is going to interfere with the steering shaft as you can see in the pic.
Originally Posted by AceHaag
I got my headers and here are some pics
the passenger side fits without to much trouble but it looks like it is a little bit close to the firewall the driver side looks like it is going to interfere with the steering shaft as you can see in the pic.
the passenger side fits without to much trouble but it looks like it is a little bit close to the firewall the driver side looks like it is going to interfere with the steering shaft as you can see in the pic.
