SFI 25.2 Mustang/LSx build "The Renegade"
04-05-2009, 11:42 AM
#1581
10 Second Club
iTrader: (35)
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes
on
0 Posts
Right on Phil. It'd always nice to get a new toy box. Are you putting it behind the house? It looks like you had to remove some tree's to put it there.
My toy box at my house is 24'x36' and my body shop is 24'x74' and it is never enough space!
My next one will be a monster size pole barn, when ever we move. I'm hoping to move out towards the country were I can have a barn bigger than my house lol.
04-05-2009, 05:13 PM
#1582
TECH Enthusiast
Join Date: Sep 2006
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
I'm actually becoming a bit more interested in the house then the car. 
I'm really lucky as I have having access to a fully equipped manufacturing shop (Friends)...as well I work at a tire shop so I can easily grab a hoist if I need it.
Actually Phil, maybe if we found a spot we should pit my buddies boat against your mustang.
I'm really lucky as I have having access to a fully equipped manufacturing shop (Friends)...as well I work at a tire shop so I can easily grab a hoist if I need it.Actually Phil, maybe if we found a spot we should pit my buddies boat against your mustang.
04-06-2009, 03:17 PM
#1583
I'm actually becoming a bit more interested in the house then the car. I'm really lucky as I have having access to a fully equipped manufacturing shop (Friends)...as well I work at a tire shop so I can easily grab a hoist if I need it.
Actually Phil, maybe if we found a spot we should pit my buddies boat against your mustang.
I'm really lucky as I have having access to a fully equipped manufacturing shop (Friends)...as well I work at a tire shop so I can easily grab a hoist if I need it.Actually Phil, maybe if we found a spot we should pit my buddies boat against your mustang.
The house is coming along nicely. We're hoping to have our occupancy permit next wednesday. This week is a pretty busy one...Tuesday
Comcast wiring cable to house
Gutters getting installed
Basement insulation finalized
Starting to do final clean
Finish building master closet storage units
Wednesday
Garage slab/footers
Pour steps for porch
Order Glass for shower
Install fridge
Thursday
Grading yard && Seed
Pickup Marble top for vanity
Finish Master shower tile work
Plumber will do final hookup for master bath and laundry room
Friday
Start grade/bankrun for driveway to house/shop
Glass install around shower
Saturday/sunday/monday
Packing
Start assembling shop structure
Driveway
Pavers for walkway to house
Hopefully I'll be done by tuesday so we can get bookin on the garage.
04-06-2009, 03:18 PM
#1584
Right on Phil. It'd always nice to get a new toy box. Are you putting it behind the house? It looks like you had to remove some tree's to put it there.
My toy box at my house is 24'x36' and my body shop is 24'x74' and it is never enough space!
My next one will be a monster size pole barn, when ever we move. I'm hoping to move out towards the country were I can have a barn bigger than my house lol.
My toy box at my house is 24'x36' and my body shop is 24'x74' and it is never enough space!
My next one will be a monster size pole barn, when ever we move. I'm hoping to move out towards the country were I can have a barn bigger than my house lol.
04-07-2009, 03:24 PM
#1597
FormerVendor
iTrader: (38)
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
Good to see it getting there (house and motor) 
Swung by my machine shop yesterday to check status on my motor and teh machine work. Well, all they have to do now is PTV.
Cam came in at 27x/28x @ .050 with .79x/.81x with a 110 LSA. I would divulge teh EXACT specs, but did not write them down, and can't remember exactly what they were, but that is pretty close.
Heads flowed 34x CFM @ .700 and 25x CFM @ .700 Same thing, I can't remember EXACTLY what they flowed as I did not write them down. They did flow the heads up to .800, but it was like the same as @ .700. I think a smidge more. So, heads should work out real nice. Got the T&D's shaft, heads have to be machined for the larger hold down bolt....getting there.
Swung by my machine shop yesterday to check status on my motor and teh machine work. Well, all they have to do now is PTV.
Cam came in at 27x/28x @ .050 with .79x/.81x with a 110 LSA. I would divulge teh EXACT specs, but did not write them down, and can't remember exactly what they were, but that is pretty close.
Heads flowed 34x CFM @ .700 and 25x CFM @ .700 Same thing, I can't remember EXACTLY what they flowed as I did not write them down. They did flow the heads up to .800, but it was like the same as @ .700. I think a smidge more. So, heads should work out real nice. Got the T&D's shaft, heads have to be machined for the larger hold down bolt....getting there.
