Can I make a 10.99 or quicker
#1
11 Second Club
Thread Starter
iTrader: (7)
Join Date: Sep 2007
Location: Pearland Tx
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Can I make a 10.99 or quicker
Car is a 1999 z28 with
Full Exhaust
Lid,FAST 92mm Setup,Smooth Bellow
TrickFlow 215cc stock chambers
COMP 232/237 112lsa .603 .605
4160e 4400 stall through 10 bolt with 3.73s
on weld Draglites and drag radials
Weighs about 3250 with me in it
Putting it all together this weekend and just wondering if a 10 second pass is possilble.
Full Exhaust
Lid,FAST 92mm Setup,Smooth Bellow
TrickFlow 215cc stock chambers
COMP 232/237 112lsa .603 .605
4160e 4400 stall through 10 bolt with 3.73s
on weld Draglites and drag radials
Weighs about 3250 with me in it
Putting it all together this weekend and just wondering if a 10 second pass is possilble.
Last edited by Ls1ChevyII1963; 10-03-2009 at 12:33 PM.
#2
11 Second Club
iTrader: (11)
Join Date: Jul 2007
Location: anozirA
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
Doubtful, according to what you put right there.
Do you know what kind of power that's putting down? Also, stock cam still? I would think that would go with a set of trickflow heads, but maybe I'm wrong.
I would put you somewhere in the 11s with that setup if you truly do have a stock cam still.
Do you know what kind of power that's putting down? Also, stock cam still? I would think that would go with a set of trickflow heads, but maybe I'm wrong.
I would put you somewhere in the 11s with that setup if you truly do have a stock cam still.
#3
11 Second Club
Thread Starter
iTrader: (7)
Join Date: Sep 2007
Location: Pearland Tx
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Doubtful, according to what you put right there.
Do you know what kind of power that's putting down? Also, stock cam still? I would think that would go with a set of trickflow heads, but maybe I'm wrong.
I would put you somewhere in the 11s with that setup if you truly do have a stock cam still.
Do you know what kind of power that's putting down? Also, stock cam still? I would think that would go with a set of trickflow heads, but maybe I'm wrong.
I would put you somewhere in the 11s with that setup if you truly do have a stock cam still.
Completely forgot to post cam specs they are 232/237 112lsa .603 .605
#4
11 Second Club
iTrader: (11)
Join Date: Jul 2007
Location: anozirA
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
With your raceweight at 3250 and you being inside....you would need a nice DA to get it done, but it's possible. What drag radials? Nittos, not a chance, mickey thompsons, possible.