Fireball Outlaw Drag Radial Rebuild Thread
#182
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
yup...the cracked block makes a good mockup block...about the only good thing its useful for...other than maybe a coffee table
#185
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
2.5" stainless v-bands, crossover piping and bends, flex couplers, EGT bungs, aluminum downpipe flange and some 5" aluminum pipe are on the way...
current plan is to try to bring the 2.5 pipes to the center of the motor (to keep both banks balanced...we've got some data suggesting this is pretty important), merge into a single 3.5" pipe, then run a 3.5" pipe into a 3.5" x T6 transition I found
For the record...
a single 16-gauge 3.5" pipe has 8.92 in^2 area
dual 16-gauge 2.5" pipes have 8.82 in^2 area
current plan is to try to bring the 2.5 pipes to the center of the motor (to keep both banks balanced...we've got some data suggesting this is pretty important), merge into a single 3.5" pipe, then run a 3.5" pipe into a 3.5" x T6 transition I found
For the record...
a single 16-gauge 3.5" pipe has 8.92 in^2 area
dual 16-gauge 2.5" pipes have 8.82 in^2 area
#188
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
http://www.mandrelbends.com/transiti...-form-664.html
I don't think their picture is right (it says picture may not be of exact product). I'll take a pic once it arrives
I don't think their picture is right (it says picture may not be of exact product). I'll take a pic once it arrives
#189
TECH Regular
iTrader: (4)
Join Date: Sep 2008
Location: Joplin, MO
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
Dang that website is awesome. They've got a lot of good stuff. I like that 3.50" to T6 form. IMO that makes things a lot easier since you can buy parts already pre-fabbed like that.
#190
Outlaw 10.5 Director
iTrader: (9)
Join Date: Nov 2001
Location: Commerce Twp.
Posts: 2,136
Likes: 0
Received 0 Likes
on
0 Posts
http://www.mandrelbends.com/transiti...-form-664.html
I don't think their picture is right (it says picture may not be of exact product). I'll take a pic once it arrives
I don't think their picture is right (it says picture may not be of exact product). I'll take a pic once it arrives
The car is looking good!
Tom
#191
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
transition came in...it was a smidge big in one direction for my T6 flange (some manufacturers are different than others I suppose)...10 minutes with a carbide burr fixed that...left it tight and I pressed it into the flange...
#200
10 Second Club
iTrader: (64)
Well is it done yet?!?!? where are the updates?? Don't make Zturd, MikeP and myself come down there and finish it up for ya. MikeP needs to work on his welding since he just ordered stuff to put a 10point in the Vett since he got kicked out of Cecil the other week
J/K looking good Brian
J/K looking good Brian