441 LSX,TFS 235,Nasty Sheetmetal Intake,Twin TC70's Turbo kit by KYTP 6spd street car
05-28-2010, 12:16 PM
#86
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jul 2004
Location: Arlington Tx
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
Well does anybody have or know where to get a straight LS1 thermostat housing? I have been waiting a month for one from jegs and they told me 3 more wks. Car is put together now. I will have pics posted soon. They started last wk end. It sound so sick
05-28-2010, 03:54 PM
#88
I run a 3.5" from the IC to my throttle body. Again, only because the outlet on my IC is 3.5" and my inlet for the TB is 4". It was more about the couplers than anything else.
For a stock pump or an electric?
05-28-2010, 08:17 PM
#89
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jul 2004
Location: Arlington Tx
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
No. I believe that Mighty Mouse runs a 3" pipe.
Steve's is 4" but that's mostly because the outlet on the IC is 4". There is a pretty decent chunk cut out of the 90* that goes around the formula's driving lights. It's the tightest front clip for an fbody.
I run a 3.5" from the IC to my throttle body. Again, only because the outlet on my IC is 3.5" and my inlet for the TB is 4". It was more about the couplers than anything else.
For a stock pump or an electric?
Steve's is 4" but that's mostly because the outlet on the IC is 4". There is a pretty decent chunk cut out of the 90* that goes around the formula's driving lights. It's the tightest front clip for an fbody.
I run a 3.5" from the IC to my throttle body. Again, only because the outlet on my IC is 3.5" and my inlet for the TB is 4". It was more about the couplers than anything else.
For a stock pump or an electric?
06-16-2010, 07:37 AM
#90
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jul 2004
Location: Arlington Tx
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
will have updated pics posted. car is put together and we lowered it all the way around.Looks ******* sick,exhaust is 90% done and looks sick to.
06-16-2010, 07:41 AM
#91
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jul 2004
Location: Arlington Tx
Posts: 1,039
Likes: 0
Received 0 Likes
on
0 Posts
anybody use the JGS WG's? i here there springs are weak? i have the middle springs in them right now. i just want 10-15lbs for right now,should the middle springs work or should i get there stiffest one? i am using a eboost2
06-24-2010, 03:40 PM
#100
Nice build!! I just re-pinned my harness from 98 to 99-02. Not too bad of a job, but it is real time consuming. Just lable everything with where it goes in the new computer and pull all the pins out, there are only a couple that stay in place.
I have a spreadsheet that tells you what each pin on a 98 harness goes to in a 99+ harness if you need it.
Frank
I have a spreadsheet that tells you what each pin on a 98 harness goes to in a 99+ harness if you need it.
Frank
Thanks in advance!!!!
Nevermind. We found it online. Thanks anyway. Free bump. LOL