Project Hairy Banana (1967 Camaro single turbo)
#481
Seats look good!! Ive seen em powder coated instead of the cover, it was looking super nice in gloss! Im thinking of doin this... saves weight too!! LOL!!
about them wheels...... have you seen the Black one’s “Weld” do? They are all black except a little line around every hole. Just like 1/4 inch lip. It makes ALL the difference in the wheel. Instead of looking like a big glob of black.... they look super nice!! They not even that expensive depending on how much you paid for these and could sell em back off andmake a buck maybe. Cuz im thinking powdercoating is about gonna bring this to about even......
Anyway, check em out for yourself, if for nothing more than the coating idea;
https://www.jegs.com/i/Weld-Racing/9...14346/10002/-1
#490
Launching!
Trailered it from PA to Kentucky.... it was a blast but bad weather.... it’s def a 10 footer,. good from a far but far from good... my pap used to drive it in the winter lol
#493
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
12.18
Rear 15x14 Draglites that I picked up are out for powdercoating, matte black. Mounting 325s on them.
Computer board shipped, should be here Thursday.
I started the brake lines, the easy stuff. I have the Motion kit. I also ordered a Wilwood bracket.
Contemplating buying some used fronts from a buddy.
Bought a Glasstek bolt-on trunk lid from a buddy, sold my stock lid and spoiler. Should drop at least 25 lbs.
Rear 15x14 Draglites that I picked up are out for powdercoating, matte black. Mounting 325s on them.
Computer board shipped, should be here Thursday.
I started the brake lines, the easy stuff. I have the Motion kit. I also ordered a Wilwood bracket.
Contemplating buying some used fronts from a buddy.
Bought a Glasstek bolt-on trunk lid from a buddy, sold my stock lid and spoiler. Should drop at least 25 lbs.
#495
LS1Tech Co-Founder
Thread Starter
iTrader: (34)
@Slammed silverado .
I had a used set of 15x14 Draglite powdercoated matte black, they look pretty cool. I got the idea from your car, with the black Convo Pros.
Now I'm wondering, so I get a set of matching fronts.....
I had a used set of 15x14 Draglite powdercoated matte black, they look pretty cool. I got the idea from your car, with the black Convo Pros.
Now I'm wondering, so I get a set of matching fronts.....
#497
Could use those nice Nuts from Champion or Racecraft (many others) they are cheap and would be nice on the black wheels to break em up a bit.
Im getting the black / Machined ones already have fronts in 1/2 in.
https://www.championbillet.com/5-8-18-lug-nut/
Lead.
Im getting the black / Machined ones already have fronts in 1/2 in.
https://www.championbillet.com/5-8-18-lug-nut/
Lead.