harlans 2step?
Thread Starter
Joined: Nov 2001
Posts: 7,903
Likes: 1
From: Cleveland, OH
harlans 2step? Harlan you mentioned to me once about testing it.....where are you at with this thing? I'd be glad to pay you the money for it...help ya test it and then swap or whatever for a final version.
I think I will wire it to a switch on my clutch pedal....it should keep boost between shifts.
I think I will wire it to a switch on my clutch pedal....it should keep boost between shifts.
Re: harlans 2step? well
The one and only prototype is in the mail on the way to the Colonel right now. I only had one set of connectors on hand, and have yet to order more due to the minimum order amount required. I don't want to have $250 worth of connectors i can't use <img src="gr_images/icons/wink.gif" border="0">
I had it in my car for about 1 month, and 1000 miles worth of driving. So i'm pretty confident it works <img src="gr_stretch.gif" border="0">
Tested it on another NA car, word of advise...
Don't use it on a car with CAT's. <img src="gr_eek2.gif" border="0">
Once i confirm it's good to go w/ a BIG motor and a T-brake, I'll finalize the board and software. Then off to the board house, order boxes, connectors, parts, harnesses, etc.
And put my assembler to work <img src="gr_stretch.gif" border="0">
Soon grasshopper, soon. <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />
The one and only prototype is in the mail on the way to the Colonel right now. I only had one set of connectors on hand, and have yet to order more due to the minimum order amount required. I don't want to have $250 worth of connectors i can't use <img src="gr_images/icons/wink.gif" border="0">
I had it in my car for about 1 month, and 1000 miles worth of driving. So i'm pretty confident it works <img src="gr_stretch.gif" border="0">
Tested it on another NA car, word of advise...
Don't use it on a car with CAT's. <img src="gr_eek2.gif" border="0">
Once i confirm it's good to go w/ a BIG motor and a T-brake, I'll finalize the board and software. Then off to the board house, order boxes, connectors, parts, harnesses, etc.
And put my assembler to work <img src="gr_stretch.gif" border="0">
Soon grasshopper, soon. <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />
Thread Starter
Joined: Nov 2001
Posts: 7,903
Likes: 1
From: Cleveland, OH
Re: harlans 2step? i imagine it would damage the cats with all the raw fuel. As i understand it Harlan has every other cylinder not fire to get the "stutter". The raw fuel from the "misfire" would damage the cats eventually. Course I could be WAYYYY off but thats my guess. As far as "patience" I have very little. I'm a gadget junkie and your 2 step is a "gadget" that will actually be useful! Can you give a guesstimate as to when I could have one in my hands? I promise I wont hold you to that date or rag you as to why its not out. You still think around 100 bux is gonna be the price? That thing will sell like crazy for that price.
Adkoonerstrator
iTrader: (4)
Joined: Nov 2001
Posts: 21,420
Likes: 0
From: Deep in the seedy underworld of Koonerville
Re: harlans 2step? Might have something to do with excess fuel from the dropped cylinders clogging them up.
or
The cats are lighting up the raw fuel and making a flamethrower exhaust system. <img src="gr_eek2.gif" border="0">
[ February 06, 2002: Message edited by: XLR8NSS ]</p>
or
The cats are lighting up the raw fuel and making a flamethrower exhaust system. <img src="gr_eek2.gif" border="0">
[ February 06, 2002: Message edited by: XLR8NSS ]</p>
Re: harlans 2step? That's exactly it <img src="gr_sad.gif" border="0">
the heavy misfire, IE the stutter sends plenty of raw fuel into the converters. It's a quick and easy way to melt the "brick" into a blob.
It's an "Off-road use only product. Not for polution control equipt vehicles" <img src="gr_stretch.gif" border="0">
It works on a vehicle w/ CAT's just fine, but i hold no responsibilty for what it does to them. Use at your own risk type of thing.
Still looking about the same price. The ***** and boards are looking a little higher than expected, and i still don't have a decent idea of labor on the harneses. All i can say for sure now is less than $150, and more than $100. Where it falls in there is TBD, but i'm thinking closer to $100 is the way it's headed
the heavy misfire, IE the stutter sends plenty of raw fuel into the converters. It's a quick and easy way to melt the "brick" into a blob.
It's an "Off-road use only product. Not for polution control equipt vehicles" <img src="gr_stretch.gif" border="0">
It works on a vehicle w/ CAT's just fine, but i hold no responsibilty for what it does to them. Use at your own risk type of thing.
Still looking about the same price. The ***** and boards are looking a little higher than expected, and i still don't have a decent idea of labor on the harneses. All i can say for sure now is less than $150, and more than $100. Where it falls in there is TBD, but i'm thinking closer to $100 is the way it's headed
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Adkoonerstrator
iTrader: (4)
Joined: Nov 2001
Posts: 21,420
Likes: 0
From: Deep in the seedy underworld of Koonerville
Re: harlans 2step? <img src="gr_eek2.gif" border="0">
I guess thats one way to gut the CATS. <img src="gr_grin.gif" border="0">
[ February 06, 2002: Message edited by: XLR8NSS ]</p>
I guess thats one way to gut the CATS. <img src="gr_grin.gif" border="0">
[ February 06, 2002: Message edited by: XLR8NSS ]</p>
Re: harlans 2step? HOLY ****!!! hehehehe, that rocks! Was that a car with cats, or no cats? And where's this video??? <img src="gr_grin.gif" border="0">
- Matt
PS - Lemme know when you will be taking pre-orders. I'll be first in line. <img src="gr_stretch.gif" border="0">
- Matt
PS - Lemme know when you will be taking pre-orders. I'll be first in line. <img src="gr_stretch.gif" border="0">
TECH Apprentice
Joined: Nov 2001
Posts: 398
Likes: 0
From: Sterling Heights Mi
Re: harlans 2step? [quote]Originally posted by Fireball:
<strong>haha...do that at a redlight at night and see what kinda reaction you get from the car behind you LOL</strong><hr></blockquote>
I want it for tailgater protection <img src="gr_stretch.gif" border="0">
That's my car, and it had cats...had <img src="gr_images/icons/wink.gif" border="0">
<strong>haha...do that at a redlight at night and see what kinda reaction you get from the car behind you LOL</strong><hr></blockquote>
I want it for tailgater protection <img src="gr_stretch.gif" border="0">
That's my car, and it had cats...had <img src="gr_images/icons/wink.gif" border="0">
Re: harlans 2step? it's more or less final in the design stage
I've got 1 prototype in the hands of a tester right now *cough* colonel *cough* <img src="gr_grin.gif" border="0">
Once i get some feed back on how the install/setup/etc goes i'll finalize the parts and begin the process.
It will take a couple weeks to get circuit boards though.
I hope to be in full blown production by mid-march.
I've got 1 prototype in the hands of a tester right now *cough* colonel *cough* <img src="gr_grin.gif" border="0">
Once i get some feed back on how the install/setup/etc goes i'll finalize the parts and begin the process.
It will take a couple weeks to get circuit boards though.
I hope to be in full blown production by mid-march.
Re: harlans 2step? I was shooting that video with blackhawk's camera, and was not expecting that. I almost fell on my a$$. <img src="gr_grin.gif" border="0">
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
