Looking for a 9", where is the best place to buy?
#3
Your gonna get a lot of oppinions to this question. I am gonna say that if you pay nearly 4000 dollars for a rear and suspension package it darn sure better be amazing.
Ive been building my own 9" from a factory truck housing. All cost's including buying a core ive got right at 1600 in it all completely new. I utilized quicktime performance for my third member and it cost me 672 bucks for everything. It was way cheaper than I found anywhere else.
$1600 is about the average price for a used 12 bolt in the classified section on here.
Ive been building my own 9" from a factory truck housing. All cost's including buying a core ive got right at 1600 in it all completely new. I utilized quicktime performance for my third member and it cost me 672 bucks for everything. It was way cheaper than I found anywhere else.
$1600 is about the average price for a used 12 bolt in the classified section on here.
#4
Check out the above link, shipping is included in the price, and these rears are shipped out two days after the order is received. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#5
If you are with in a decent driving distance swing by our shop, nothing better than going to the source of the people that not only sell it to you but build it for you as well.
#6
We offer free shipping too, plus since we are not in your state you won't have to pay state sales tax! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#7
Our prices are so low even with sales tax included it will be cheaper especially since we give you a discount on no shipping, and lets be honest there is no such thing as free as it is all figured into the prices that's why we can offer you a discount if you pick it up.
Trending Topics
#8
Our prices are so low even with sales tax included it will be cheaper especially since we give you a discount on no shipping, and lets be honest there is no such thing as free as it is all figured into the prices that's why we can offer you a discount if you pick it up.
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#9
All though I was talking about putting someone in our fabricated housing, as it is the best deal on the market right now.
#10
Now let's be honest... You knew we were talking about a Moser rearend... It doesn't sound like the op is looking to get upgraded into a fabricated rear end. He probably also doesn't want to have to wait two or three months for it either... Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#11
Sure we have a time frame, we are building one off items to suit a customers needs. That is how $2000+ purchases should be I know if I personally am spending money on such an item I would not limitations. That is also why we are doing Moser stamped housings as well for the people that need them ASAP and we will still not be limiting them on a purchase.
#12
Why would he not want the best deal he possibly can get? Why make such a purchase and limit yourself? Unless you have a torque arm already our fabricated housing that comes with one is one of the best deals on the market because by the time you purchase any other rear end and then yet another manufactures torque arm you have not spent the same if not exceed the cost of our fabricated housing. We also have countless customers that have sold their existing 12 bolt or 9 inch rearends that have aftermarket torque arms and step up to the MWC package to get the newest technology and lightest weight.
Sure we have a time frame, we are building one off items to suit a customers needs. That is how $2000+ purchases should be I know if I personally am spending money on such an item I would not limitations. That is also why we are doing Moser stamped housings as well for the people that need them ASAP and we will still not be limiting them on a purchase.
Sure we have a time frame, we are building one off items to suit a customers needs. That is how $2000+ purchases should be I know if I personally am spending money on such an item I would not limitations. That is also why we are doing Moser stamped housings as well for the people that need them ASAP and we will still not be limiting them on a purchase.
https://ls1tech.com/forums/ls1tech-s...-eric-mwc.html
Sounds like maybe you might need to take care of your current customers... Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#14
https://ls1tech.com/forums/ls1tech-s...-eric-mwc.html
Sounds like maybe you might need to take care of your current customers... Bob
Sounds like maybe you might need to take care of your current customers... Bob
Anyone with any questions feel free to PM us or call the shop.
#19
Give me a postal code and I'll check for you first thing Monday morning for you. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#20
I just bought a Strange S60. For the price, i couldn't beat it. It's not a "light" option by any means, but if you're interested, talk to Carl at CRP. He's a real nice guy, and he can get you into a fully assembled S60 with a Chromoly driveshaft, for only a little bit more than the price listed on the Moser 9" above. I also wouldn't be too impressed with any company that picks a fight with another company in a thread where you are asking who to buy through.