Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

American Racing Headers are installed

Thread Tools
 
Search this Thread
 
Old Feb 1, 2009 | 01:27 PM
  #1  
sleepinghawk's Avatar
Thread Starter
TECH Fanatic
 
Joined: Sep 2005
Posts: 1,293
Likes: 1
From: Fredericksburg Va
Default American Racing Headers are installed

It was cold and snowing and around 25 degrees, but had no problems just sticking the headers right into place. Very impressed with ARH and their catted Y. I have the Loudmouth 1 with the ARH and alot of the drone and rasp that some complained about are gone. Either way I love the sound.




Reply
Old Feb 1, 2009 | 01:50 PM
  #2  
transambroli's Avatar
Launching!
iTrader: (4)
 
Joined: Aug 2008
Posts: 262
Likes: 1
From: Ft Washington MD
Default

Sure wish I could hear it too bad someone forgot to add sound clips, looks good though. Taken it for a drive yet, feel any added power?
Reply
Old Feb 1, 2009 | 01:57 PM
  #3  
omcar's Avatar
TECH Fanatic
iTrader: (10)
 
Joined: Jun 2006
Posts: 1,333
Likes: 0
From: Pennsylvania
Default

When will you get a tune and where?
Reply
Old Feb 1, 2009 | 02:07 PM
  #4  
Lopoetve's Avatar
TECH Regular
iTrader: (1)
 
Joined: Aug 2008
Posts: 410
Likes: 0
From: Colorado
Default

any issues or problems with the install?
Reply
Old Feb 1, 2009 | 03:09 PM
  #5  
sleepinghawk's Avatar
Thread Starter
TECH Fanatic
 
Joined: Sep 2005
Posts: 1,293
Likes: 1
From: Fredericksburg Va
Default

Originally Posted by transambroli
Sure wish I could hear it too bad someone forgot to add sound clips, looks good though. Taken it for a drive yet, feel any added power?
There is 2 on youtube that are at idle and I went out today and did a drive one! I am impressed with the headers and catted Y with the loudmouth 1. So tonight I'll post it up. But here are the 2 idle ones.
http://www.youtube.com/watch?v=j1qL0_uXkbg
http://www.youtube.com/watch?v=uZkK7tj-cfg
The tapping was fixed. The air tube bolt was stripped. Just the usual seat of the pants feel! Sure does seem like it!

Originally Posted by omcar
When will you get a tune and where?
So far everything is great. No missing, no codes, and it runs strong. My mechanic has already contacted me to stop by and he will check everything out for me after I put some miles on it. But the Mechanic who works on it is named John and he is in Warrenton, VA. I'll pm you his info. Not a sponsor.

Originally Posted by Lopoetve
any issues or problems with the install?
Other than the driver side air tube, 1 bolt was stripped, but just put a nut on it and that was it. The headers were Great. I just made sure I had it jacked high. That's all it was.So to answer you, No problems with the install!
Reply
Old Feb 1, 2009 | 03:25 PM
  #6  
allngn_c5's Avatar
TECH Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Default

Love the tent that you working in bro !!! Very glad to hear that it was easy as hell to install even in the 25* temps. Did you at least have an electric heater or something blowing under there ???
Reply
Old Feb 1, 2009 | 03:28 PM
  #7  
Lopoetve's Avatar
TECH Regular
iTrader: (1)
 
Joined: Aug 2008
Posts: 410
Likes: 0
From: Colorado
Default

awesome on the install. I'm sold on the ARH headers - will be getting them soon
Reply
Old Feb 1, 2009 | 03:40 PM
  #8  
sleepinghawk's Avatar
Thread Starter
TECH Fanatic
 
Joined: Sep 2005
Posts: 1,293
Likes: 1
From: Fredericksburg Va
Default

Originally Posted by allngn_c5
Love the tent that you working in bro !!! Very glad to hear that it was easy as hell to install even in the 25* temps. Did you at least have an electric heater or something blowing under there ???
No sir! It wasn't too bad, had to put alot of sheets and sleeping bags on the concrete Thank God those headers slid right in! I was cold!

Originally Posted by Lopoetve
awesome on the install. I'm sold on the ARH headers - will be getting them soon
So was I! I am so glad I put the money in them!
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-1

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-2

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-3

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-4

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-5

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-6

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
story-7

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

 Verdad Gallardo
story-8

10 Camaros You Should Never Buy

 
story-9

10 LS Engine Myths That Refuse to Die

 Verdad Gallardo
Old Feb 1, 2009 | 04:05 PM
  #9  
INMY01TA's Avatar
11 Second Club
20 Year Member
iTrader: (1)
 
Joined: Apr 2003
Posts: 3,235
Likes: 2
From: Crofton Md.
Default

Very nice. I woulda went without all the emissions junk tho.
Reply
Old Feb 1, 2009 | 04:53 PM
  #10  
A.R. Headers's Avatar
Closed ex-Sponsor Account
 
Joined: Sep 2008
Posts: 43
Likes: 0
Default

Sleepinghawk, Thanks for choosing ARH. Enjoy your ride.

Nick
Reply
Old Feb 1, 2009 | 05:13 PM
  #11  
sleepinghawk's Avatar
Thread Starter
TECH Fanatic
 
Joined: Sep 2005
Posts: 1,293
Likes: 1
From: Fredericksburg Va
Default

Originally Posted by A.R. Headers
Sleepinghawk, Thanks for choosing ARH. Enjoy your ride.

Nick
You are welcome! Thank you Nick for a great quality Header and catted Y! I have been enjoying it since the install!
Mike
Reply
Old Feb 1, 2009 | 05:36 PM
  #12  
sleepinghawk's Avatar
Thread Starter
TECH Fanatic
 
Joined: Sep 2005
Posts: 1,293
Likes: 1
From: Fredericksburg Va
Default

Originally Posted by transambroli
Sure wish I could hear it too bad someone forgot to add sound clips, looks good though. Taken it for a drive yet, feel any added power?
No laws broken, just a little sound bite! As you wished! By the weekend I hope to have a clip of what it sounds like when I go by.
http://www.youtube.com/watch?v=8sHSG405L9o

http://www.youtube.com/watch?v=U8EsP2v_BxE
Reply
Old Feb 2, 2009 | 11:24 AM
  #13  
allngn_c5's Avatar
TECH Senior Member
iTrader: (3)
 
Joined: Apr 2006
Posts: 6,524
Likes: 1
From: Western Burbs of Detroit
Default

[QUOTE=sleepinghawk;10965998]No sir! It wasn't too bad, had to put alot of sheets and sleeping bags on the concrete Thank God those headers slid right in! I was cold!


QUOTE]


Too bad you didn't have one of those little electric heaters. It could've made it a lot more comfortable.
Reply
Old Feb 2, 2009 | 11:24 AM
  #14  
dondb's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Feb 2008
Posts: 354
Likes: 0
From: Seacoast of NH
Default

Sounds great!
I bought my ARH's a couple of weeks ago,but i'm going to wait a couple more weeks for the install. LOL, I'm old and waiting for it to warm up About how long for the install?
Reply
Old Feb 2, 2009 | 01:12 PM
  #15  
IllusionalTA's Avatar
10 Second Club
20 Year Member
Photogenic
iTrader: (9)
 
Joined: Jan 2003
Posts: 1,271
Likes: 1
From: NY
Default

Can't go wrong w/ ARH.... Top quality piece and great folks to deal with.....
Reply
Old Feb 2, 2009 | 04:20 PM
  #16  
sleepinghawk's Avatar
Thread Starter
TECH Fanatic
 
Joined: Sep 2005
Posts: 1,293
Likes: 1
From: Fredericksburg Va
Default

[QUOTE=allngn_c5;10970801]
Originally Posted by sleepinghawk
No sir! It wasn't too bad, had to put alot of sheets and sleeping bags on the concrete Thank God those headers slid right in! I was cold!


QUOTE]


Too bad you didn't have one of those little electric heaters. It could've made it a lot more comfortable.
Would you believe I never even thought of something like that! I have one at work

Originally Posted by dondb
Sounds great!
I bought my ARH's a couple of weeks ago,but i'm going to wait a couple more weeks for the install. LOL, I'm old and waiting for it to warm up About how long for the install?
I was going to wait also, but my boy had allready pulled the stock manifolds off while I was inside thawing out. Then when I got home from work he was waiting on me again! I'm 49, I couldn't wait any longer

Originally Posted by IllusionalTA
Can't go wrong w/ ARH.... Top quality piece and great folks to deal with.....
You are 100 % correct!
Reply
Old Feb 2, 2009 | 09:38 PM
  #17  
Black02SLPSS's Avatar
TECH Fanatic
15 Year Member
iTrader: (5)
 
Joined: Nov 2006
Posts: 1,485
Likes: 1
From: Owasso, Ok
Default

Originally Posted by allngn_c5
Love the tent that you working in bro !!! Very glad to hear that it was easy as hell to install even in the 25* temps. Did you at least have an electric heater or something blowing under there ???
X2 that tent kicks ***! I would do that but i would personally wait till it warmed up lol
Reply
Old Feb 2, 2009 | 09:43 PM
  #18  
98RedBird's Avatar
TECH Addict
iTrader: (77)
 
Joined: May 2005
Posts: 2,773
Likes: 3
From: Peoria, IL
Default

Man, if that's not your DD and you had to do it then that's committment right there. **** installing headers in 25 degree weather lol I'm waiting til it warms up! Props on the little workshop tent you made though, it made me laugh a little!
Reply
Old Feb 2, 2009 | 10:55 PM
  #19  
sleepinghawk's Avatar
Thread Starter
TECH Fanatic
 
Joined: Sep 2005
Posts: 1,293
Likes: 1
From: Fredericksburg Va
Default

Originally Posted by Black02SLPSS
X2 that tent kicks ***! I would do that but i would personally wait till it warmed up lol
That tent saved my butt! lol The best part is I was not rushed, but wanted the headers on!

Originally Posted by 98RedBird
Man, if that's not your DD and you had to do it then that's committment right there. **** installing headers in 25 degree weather lol I'm waiting til it warms up! Props on the little workshop tent you made though, it made me laugh a little!
LOL! not my D/D anymore, but I drive it every day it's clear! Yea it was too cold, but the Headers were such a great fit that I couldn't stop! Just ordered a Underdrive Pulley so, might have to get the tent ready again cause rain and snow is coming again!
Reply
Old Feb 3, 2009 | 12:01 AM
  #20  
SSmoken's Avatar
11 Second Club
iTrader: (26)
 
Joined: Oct 2006
Posts: 2,140
Likes: 0
From: S.W. Missouri
Default

good deal. talk about desperate lol. i think i would have waited till spring.
Reply



All times are GMT -5. The time now is 03:01 AM.

story-0
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-1
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-2
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-3
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-4
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-5
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-6
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE
story-7
Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Slideshow: A heavily reworked 1972 K5 Blazer swaps its off-road roots for a low-slung street-focused build with modern V8 power.

By Verdad Gallardo | 2026-03-09 18:08:45


VIEW MORE
story-8
10 Camaros You Should Never Buy

Slideshow: There are thousands of used Camaros on the market but we think you should avoid these 10

By | 2026-02-17 17:09:30


VIEW MORE
story-9
10 LS Engine Myths That Refuse to Die

Slideshows: Which one of these myths do you believe?

By Verdad Gallardo | 2026-01-28 18:10:11


VIEW MORE