When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Not sure years for A bodies, but all years of G bodies (78-88) people have had varying levels of success of them fitting. I don't know if it's the cars the headers or both that make it so they bolt right into one car and need dented or modified for another, the problems are almost always on the passenger side. The only complaint about the drivers side is people don't like the crooked collector.
JamesD.: That's not the normal price. We just cranked it up so no one would buy it in the mean time. In the description we note that we're in the middle of changing our Y-Pipe design, and will be on back order for 4 months or so.
Thanks
Sean
That's good to know, Sean. I'm a little curious, in perusing Amazon for other y pipes, I came across a listing for header & y pipe combo, from Speed Engineering, claiming to be in stock, at the regular price.
My question is, do you have any of the y pipes in stock, or are you completely out? I'd like to buy the shiny stainless y pipe that matches your headers as a combo, if it absolutely can't be done until you receive the revised versions, I understand and will end up having to buy another brand.
The headers we have in stock. Sorry, missed that one on Amazon. I took it down thanks. Yes, were looking at least a few months on LS1 Y-Pipes. It all depends on how quickly they can get us a batch. I would assume at least 3 months however. That's usually the lead time.
Truck headers are now in stock for you truck guys. The truck Y-Pipes are still in production though. I would assume another month or so for truck Y-Pipes.
Thanks
Sean
Last edited by Speed Engineering; 06-04-2015 at 10:42 PM.
We can, but the only issues would be the O2 sensor locations. The truck headers point in odd directions, which most car guys would probably have an issue with.
I am not going to lie. I am skeptical about the price of Speed Engineering headers. I am a very budget minded individual ESPECIALLY when it comes to my toys. I feel there is no reason to just buy a product because of a certain brand. So on that note...I just pulled the trigger on some 1 7/8 *SPEED ENGINEERING* race headers for my 98 Z28. Hopefully the quality is as claimed by other forum members. And let it be known I will spread the word whether good or bad after I get them in and review and install them. I look forward to receiving them.
The headers we have in stock. Sorry, missed that one on Amazon. I took it down thanks. Yes, were looking at least a few months on LS1 Y-Pipes. It all depends on how quickly they can get us a batch. I would assume at least 3 months however. That's usually the lead time.
Truck headers are now in stock for you truck guys. The truck Y-Pipes are still in production though. I would assume another month or so for truck Y-Pipes.
We have only test fitted them on the 2wd and 4wd trucks. I am assuming they should fit, but no testing has been done on the Awd vehicles at this point. If its a 6.2L in a truck the fitment should be just fine.
We have only test fitted them on the 2wd and 4wd trucks. I am assuming they should fit, but no testing has been done on the Awd vehicles at this point. If its a 6.2L in a truck the fitment should be just fine. Thanks Sean
i just picked up an 03 Suburban might have to slap these things on there. Great timing
09-05-2014, 05:34 PM
Just pulled the trigger! 
