Speed Engineering Race Version Headers Now Available!!
#787
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ya, unfortunately the clamps supplied are the only ones offered to us. And with 6 clamps required at 6.00 = 36.00 that would drive the price of the Y-Pipe way up. We were talking about offering them as an upgrade at one point, but never decided either way.
Thanks
Sean
Thanks
Sean
#793
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes, the Y-Pipe has 2qty. O2 Sensor Bungs in it for wideband tuning. We plan on keeping it a four piece design unfortunately. The extra slip fit connection gives our Y-Pipe the ability to flex/work with several headers on the market, as well as gives it mobility around aftermarket chassis components.
Thanks
Sean
Thanks
Sean
#794
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
All this talk about motor mount issues...I am beginning to wonder if my Grotyohann headers are the best design. My headers fell right in. I initially installed them with the heads off, while doing a h/c package...but I did remove them after that and reinstalled from the bottom with the car on a floor jack.
#799
Teching In
Join Date: Oct 2013
Location: Surprise, AZ
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My LS1 is stock and I just plan on adding bolt on upgrades. No major engines mods planned. So I should go with the 1 3/4 instead of 1 7/8 right?? Can someone confirm 1 3/4 is what I need or correct me if I'm wrong.
Also, I wasnt planning on replacing the motor mounts but after all the reading it looks like it is recommended. Will the new mm help with the header fitment and ground clearance. My car has a low altitude.
Also, I wasnt planning on replacing the motor mounts but after all the reading it looks like it is recommended. Will the new mm help with the header fitment and ground clearance. My car has a low altitude.
#800
Staging Lane
iTrader: (3)
Join Date: Mar 2013
Location: Flint, MI
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My LS1 is stock and I just plan on adding bolt on upgrades. No major engines mods planned. So I should go with the 1 3/4 instead of 1 7/8 right?? Can someone confirm 1 3/4 is what I need or correct me if I'm wrong.
Also, I wasnt planning on replacing the motor mounts but after all the reading it looks like it is recommended. Will the new mm help with the header fitment and ground clearance. My car has a low altitude.
Also, I wasnt planning on replacing the motor mounts but after all the reading it looks like it is recommended. Will the new mm help with the header fitment and ground clearance. My car has a low altitude.
![Guns](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_guns.gif)