Speed Engineering Race Version Headers Now Available!!
#1103
TECH Junkie
iTrader: (63)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got mine installed yesterday! Cannot believe how easily these went in, sound, look under the hood. The ONLY negative feedback would be the clamps. I have ran the TSP's, Pacesetters in other fbods that I have owned. The Speed Engineering Headers are well worth the $$$... Great job Sean!
#1105
TECH Fanatic
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got mine installed yesterday! Cannot believe how easily these went in, sound, look under the hood. The ONLY negative feedback would be the clamps. I have ran the TSP's, Pacesetters in other fbods that I have owned. The Speed Engineering Headers are well worth the $$$... Great job Sean!
Overall, the sound is great with my factory exhaust, fit was good, I am pretty satisfied.
#1107
TECH Regular
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just put these in and the installation was easy breezy, the only complaint I had was also the clamps. They were to small to fit around the joints so I had to buy crappy u-bolt clamps for the time being until I can figure out a clamp to use that wont sacrifice ground clearance these u-bolt clamps take away.
Overall, the sound is great with my factory exhaust, fit was good, I am pretty satisfied.
Overall, the sound is great with my factory exhaust, fit was good, I am pretty satisfied.
#1108
TECH Fanatic
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
WALKER 33272 Mega Band Clamps. They around $8 a piece from Rock Auto. I've used them on every exhaust system I've had on my car and are the only clamps I've not had leak. I especially like them for the y-pipe to header collector slip connections. When you crank them down they'll stretch over and create a nice seal.
#1109
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
14BFF: The only work on 2wd.
Thank you guys.. Ya, we are continuously working with the factory to provide better clamps. They have just recently added a wedge in the middle, which helps tremendously with clamping strength. Unfortunately, they didn't extend the straps to compensate. You can get the clamps on, they are just very tight. If you remove the wedge they should side on just fine. Or, if you grind a little of the wedge down it should side on smooth as well. Hopefully, our next batch will have a little longer straps.
Thanks
Sean
Thank you guys.. Ya, we are continuously working with the factory to provide better clamps. They have just recently added a wedge in the middle, which helps tremendously with clamping strength. Unfortunately, they didn't extend the straps to compensate. You can get the clamps on, they are just very tight. If you remove the wedge they should side on just fine. Or, if you grind a little of the wedge down it should side on smooth as well. Hopefully, our next batch will have a little longer straps.
Thanks
Sean
#1110
On The Tree
iTrader: (2)
Join Date: Jun 2012
Location: Mason, MI
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
14BFF: The only work on 2wd.
Thank you guys.. Ya, we are continuously working with the factory to provide better clamps. They have just recently added a wedge in the middle, which helps tremendously with clamping strength. Unfortunately, they didn't extend the straps to compensate. You can get the clamps on, they are just very tight. If you remove the wedge they should side on just fine. Or, if you grind a little of the wedge down it should side on smooth as well. Hopefully, our next batch will have a little longer straps.
Thanks
Sean
Thank you guys.. Ya, we are continuously working with the factory to provide better clamps. They have just recently added a wedge in the middle, which helps tremendously with clamping strength. Unfortunately, they didn't extend the straps to compensate. You can get the clamps on, they are just very tight. If you remove the wedge they should side on just fine. Or, if you grind a little of the wedge down it should side on smooth as well. Hopefully, our next batch will have a little longer straps.
Thanks
Sean
Overall the headers and y-pipe are really nice, but I would suggest using some of the savings to go buy some good band clamps. Would still buy again though.
#1115
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Do you guys have better clamps for your 1 7/8 long tubes? I put what you sent on and they don't tighten enough to prevent leaks. They won't even fit around the slip joint to be tightened down without taking the camp apart, and then you can't get the nut back on.
#1116
TECH Fanatic
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
use the Walker mega clamps mentioned above like 5 posts. I just put the ones I got on and they are the best clamps ever. Sealed up all my leaks. They wont fit the y-pipe to i-pipe though becuase they dont make a two size clamp so I'm stuck with a 2 3/4 inch u-bolt clamp there.
#1117
12 Second Club
iTrader: (68)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Has anyone tried using V-band clamps and having them welded to the collector and Y-pipe and then on the Y going to the I pipe? I'm considering this as an option for my car as it would make pulling exhaust out so much easier (no lift). Also, is the Y-pipe shipped with plugs for the O2 bungs? Lastly, can someone post up a picture of how tight the system sits to the car floor once installed and how close the Y-pipe is to the cross member?