New cams from Tick Performance
11-19-2013, 08:40 PM
#822
12 Second Club
iTrader: (31)
Join Date: Oct 2010
Location: Kansas City, MO
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Your car is one I really want to see at the track. You have a great combination of parts and I guarantee if it hooks with a 1.46-1.54 60' it's going 10.90s.
With your compression, heads, intake and looser stall you have the recipe for a killer small cubic inch n/a street car.
I bet you're making 460-470 rwhp/410-420 rwtq.
With your compression, heads, intake and looser stall you have the recipe for a killer small cubic inch n/a street car.
I bet you're making 460-470 rwhp/410-420 rwtq.
11-20-2013, 10:48 AM
#823
12 Second Club
iTrader: (2)
Join Date: Jul 2011
Location: West Virginia
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Very nice. Thanks for purchasing a Tick Performance SNS cam!
Once again the results speak for themselves.
That extra 60rwhp/80rwtq on nitrous, and that extra 70rwhp/40rwtq on motor sure is a welcome addition I bet!
I'm having our web guy put your results up on our web page for this camshaft. Thanks for providing detailed before and after dyno graphs! I wish more customers would do this!
Thanks again!
Once again the results speak for themselves.
That extra 60rwhp/80rwtq on nitrous, and that extra 70rwhp/40rwtq on motor sure is a welcome addition I bet!
I'm having our web guy put your results up on our web page for this camshaft. Thanks for providing detailed before and after dyno graphs! I wish more customers would do this!
Thanks again!
11-21-2013, 09:53 AM
#824
Martin, do you spec cams that will not smell with a catless setup? By smell, I mean that obvious cam overlap death smell, not just the normal stock cam catless smell.
If I add catless headers, I am going to need to switch to a cam that doesn't smell. How small do you have to go? Any suggestions? Would one of your emissions friendly cams solve the problem?
If I add catless headers, I am going to need to switch to a cam that doesn't smell. How small do you have to go? Any suggestions? Would one of your emissions friendly cams solve the problem?
11-27-2013, 10:21 AM
#827
Just a quick update to my build. This Monday it finally got to the tuner. It put down 424 hp and the stock fuel pump couldn't keep up. Going to update fuel pump this week and put back on dyno to squeeze some more from it. I'll post all numbers and dyno sheets when done.
11-27-2013, 11:54 AM
#828
Martin, do you spec cams that will not smell with a catless setup? By smell, I mean that obvious cam overlap death smell, not just the normal stock cam catless smell.
If I add catless headers, I am going to need to switch to a cam that doesn't smell. How small do you have to go? Any suggestions? Would one of your emissions friendly cams solve the problem?
If I add catless headers, I am going to need to switch to a cam that doesn't smell. How small do you have to go? Any suggestions? Would one of your emissions friendly cams solve the problem?
Shoot me an email and we'll figure something out if you'd like.
Custom camshafts are 399.99 with free shipping in the 48 continental states.
Just a quick update to my build. This Monday it finally got to the tuner. It put down 424 hp and the stock fuel pump couldn't keep up. Going to update fuel pump this week and put back on dyno to squeeze some more from it. I'll post all numbers and dyno sheets when done.
12-09-2013, 05:18 PM
#829
Teching In
Join Date: Feb 2013
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Martin I'm looking for a cam suggestion for my 2000 m6 LS1 C5. I was looking at the SNS stage 2 mild and stage3 mild as I am looking for midrange and torque starting as soon as possible. However I'm really liking the max effort numbers of the POLLUTER V2 but I don't really care for it's operating range. Is their a happy medium?
Thanks
Thanks
12-09-2013, 05:31 PM
#830
Martin I'm looking for a cam suggestion for my 2000 m6 LS1 C5. I was looking at the SNS stage 2 mild and stage3 mild as I am looking for midrange and torque starting as soon as possible. However I'm really liking the max effort numbers of the POLLUTER V2 but I don't really care for it's operating range. Is their a happy medium?
Thanks
Thanks
Send me an email and we can go over some specs.
12-10-2013, 06:56 PM
#831
Teching In
iTrader: (1)
Join Date: Apr 2012
Location: greenville sc
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Just ordered my sns stage 3 cam kit with all goodies and talking with Phil at AI to get the HCR219 cnc heads. Thanks to Martin for answering my questions and great customer service.
Erik
Erik
12-21-2013, 11:28 AM
#834
On The Tree
Join Date: Apr 2012
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
what would you suggest for my application? i'm debating on swapping out my comp xer273hr since I've recently lost a lifter and I've read these cam lobes are pretty harsh. I need drivability, but I love to hear my cam.
I've got a chevy 1500 1/2ton single cab short bed
full bolt ons
built 4l60e w/circle d 3200 stall
2002 lq4 6.0
stock 317 heads (they are off so getting them shaved is an option now)
3.55 gears
29" tires
daily driver, not a tow rig but you never know it might grab a trailor one day but unlikely.
thanks in advance.
I've got a chevy 1500 1/2ton single cab short bed
full bolt ons
built 4l60e w/circle d 3200 stall
2002 lq4 6.0
stock 317 heads (they are off so getting them shaved is an option now)
3.55 gears
29" tires
daily driver, not a tow rig but you never know it might grab a trailor one day but unlikely.
thanks in advance.
12-22-2013, 05:47 PM
#835
TECH Enthusiast
Join Date: Oct 2002
Location: NJ
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to give my nod to Martin on his great customer service and his patience in dealing with my cautious personality, finally ordering a custom built cam, BTR Springs and Lifters after 3-4wks.
There are a lot of great sponsors on this site who always give personal attention and confidence when speaking to them on the phone. Martin falls in this category. Although to me he is the new guy on the block in terms of LS1Tech, I can tell you all your in good hands and not be hesitant in your decision.
My engine is finally rebuilt by Mike T., and waiting for an open lift to reinstall the long block. Crossing my fingers everything goes as expected!
There are a lot of great sponsors on this site who always give personal attention and confidence when speaking to them on the phone. Martin falls in this category. Although to me he is the new guy on the block in terms of LS1Tech, I can tell you all your in good hands and not be hesitant in your decision.
My engine is finally rebuilt by Mike T., and waiting for an open lift to reinstall the long block. Crossing my fingers everything goes as expected!
12-22-2013, 06:32 PM
#836
what would you suggest for my application? i'm debating on swapping out my comp xer273hr since I've recently lost a lifter and I've read these cam lobes are pretty harsh. I need drivability, but I love to hear my cam.
I've got a chevy 1500 1/2ton single cab short bed
full bolt ons
built 4l60e w/circle d 3200 stall
2002 lq4 6.0
stock 317 heads (they are off so getting them shaved is an option now)
3.55 gears
29" tires
daily driver, not a tow rig but you never know it might grab a trailor one day but unlikely.
thanks in advance.
I've got a chevy 1500 1/2ton single cab short bed
full bolt ons
built 4l60e w/circle d 3200 stall
2002 lq4 6.0
stock 317 heads (they are off so getting them shaved is an option now)
3.55 gears
29" tires
daily driver, not a tow rig but you never know it might grab a trailor one day but unlikely.
thanks in advance.
Just wanted to give my nod to Martin on his great customer service and his patience in dealing with my cautious personality, finally ordering a custom built cam, BTR Springs and Lifters after 3-4wks.
There are a lot of great sponsors on this site who always give personal attention and confidence when speaking to them on the phone. Martin falls in this category. Although to me he is the new guy on the block in terms of LS1Tech, I can tell you all your in good hands and not be hesitant in your decision.
My engine is finally rebuilt by Mike T., and waiting for an open lift to reinstall the long block. Crossing my fingers everything goes as expected!
There are a lot of great sponsors on this site who always give personal attention and confidence when speaking to them on the phone. Martin falls in this category. Although to me he is the new guy on the block in terms of LS1Tech, I can tell you all your in good hands and not be hesitant in your decision.
My engine is finally rebuilt by Mike T., and waiting for an open lift to reinstall the long block. Crossing my fingers everything goes as expected!
12-23-2013, 12:42 PM
#837
On The Tree
Join Date: Apr 2012
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts