edcmat-l1

iTrader: (10)

We gotta get an idle clip up. It's stupid smooth.

WKMCD

iTrader: (2)

All I can say is:

DAMN!!!!!!!

This is going to be crazy fun. 420 or so RWT at 2200RPM.... It was insane with 380 at 2200 on the 403.

BTW: Ed tells me he's got it idling at 800RPM if that tells you anything about the smallness of the cam.

Ed and Shawn tell me they may not be done quite yet..

69LT1Bird

iTrader: (1)

Looks like I did pretty good on my guess.

Kevin, I got the intake today. Thanks.

edcmat-l1

iTrader: (10)

Working on the tip in. Cracking the throttle and trying to slip the clutch, it wants to jump off the rollers.

I've already calmed it down a bunch though.

Gotta thank Nick Williams for an awesome, HUGE throttle body!!

Got the idle down to 800, but it seems smoothest at 850. Might leave it there.

Work on it more tomorrow.

cam

iTrader: (9)

Agreed that truly is an amazing build. Congrats guys

WKMCD

iTrader: (2)

Thanks Jeff. Sorry for the dealy but these guys were busy making crazy power.

BTW: My cam is smaller than yours.

allngn_c5

iTrader: (3)

Well I guess there is something to be said about a small cam and a set of heads that flow like crazy !!!

Great job to everyone involved!
Shawn on the labor intensive build
Ed the tuning wizard
Richard for the heads
and last but not least,
Kevin on paying for it !!!

Sure is fun spending money isn't it Kevin.

BTW, looks my guess was off 8 rwhp and 9 rwtq. Sorry for not having more faith

tippy

iTrader: (1)

Thats completely amazing! Kudos to all involved in this build.

What do you think the approximate cost would be on a motor like this?

Matt

WKMCD

iTrader: (2)

https://ls1tech.com/forums/new-produ...6hp-427-a.html

Shawn @ VA Speed

iTrader: (3)

the bad part is that i think there is another 15hp or so in this thing.I just wish i had the time to find it.

Phil'sC5vette

iTrader: (4)

dont tell kevin there's room for a larger cam, because next year he'll want it.

Richard@WCCH

iTrader: (3)

Excellent job Shawn and Ed! You guys have blazed a real trail here. It's very gratifying to work with pro's like you.
Kevin, all I can say is...........be careful! The torque under the curve is incredibly stout. Hope ya got a get outa jail free card and an open account at Tire Rack

Congrats on a very successful winter project.

Richard

Pwebbz28

iTrader: (31)

Very good all around power! Figured it would lose more from engine to chassis dyno. Congrats on the power!

thedak

iTrader: (1)

eatlead

.... the thread that never ends

WKMCD and allng_c5 seem like they are professional pimps for their respective shops....

LOL 53 pages for a head and cam swap and tune

NA$TY-TA

iTrader: (21)

Turned out awesome Shawn.... never had a doubt Buddy

WKMCD

iTrader: (2)

[QUOTE=eatlead;13054328
LOL 53 pages for a head and cam swap and tune [/QUOTE]

I guess you missed the reading comprehension class. There's a whole lot more than a H/C swap in this thread and my PM's say people still find it very interesting and informative.

allngn_c5

iTrader: (3)

I don't know about Kevin, but I get 2000.00 a month for the effort !!

J/K

Don't mind him Kevin. Its very nice seeing a sizable investment pay off with more then you could have expected.

WKMCD

iTrader: (2)

Doesn't bother me at all. You're always going to get some .....



from a NOOB.

allngn_c5

iTrader: (3)

Looks like my friends g/f. LOL that bitch is retarded. Her brain isn't the reason he's dating her LOL, I guess she has some skills in other areas. XXX ftw.