teardown has begun!
I know it was a freak thing that happened. But the aluminum line could've been easily replaced.nut his decision to do it another way was to clean it up. I tried it once like that in caddis I was working on
I've learned my lesson since that aluminum line dissapates alot of heat. And itso not always convenience but I'll keep that part oem at all cost
I've learned my lesson since that aluminum line dissapates alot of heat. And itso not always convenience but I'll keep that part oem at all cost
she lives! sorry for the shitty video, there is something wrong with my nexus 5, im gonna take another video tomorrow of the idle with the open downpipe. I had to pack it up fast after that video as we had a tornado literally roll through about 30 minutes afterwards lol Seeing 50psi oil pressure at idle at about 750-800rpm, got alot of tuning to do after I get the downpipe welded up.
also does anyone have a vacuum hose routing diagram for this car? i have both valve covers routed, and the brake booster, but there is a third port on the intake manifold behind the throttle body i couldnt find a source for so i just capped it off.
If this is what you are referring to mine has nothing attached.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I didn't see it in the vid but I assume you mounted the tranny cooler already. If not don't throw that bumper on just yet. Is that a baseline tune you have or is there more to it? What is the rest of the exhaust going to be?
Baseline tune is just merely disabling certain features like CAT overtemp, DOD, idle adjustments, idle spark adjustments, PE and some minor fueling changes, shift tables for the 3.29 gears, rev limit, torque management etc. I really have to find someone who already has the 3.29 gears tuned on HPT to compare notes, because im a bit skeptical that these numbers are right.
I noticed big improvement after installing mine. As long as your getting air from the grills to it it should be fine. Cant really be seen anyway, I'm thinking your a little more, oh whats that word, oh yea **** then me lol. Well it shows in your work . You have this beast all figured out, your right, it will be fine until you get it perfect.