freshly built LS1 Long block
12-17-2008, 07:45 AM
#1
Moderator
Thread Starter
iTrader: (52)
Join Date: Jul 2006
Location: Pittsburgh, PA
Posts: 7,009
Likes: 0
Received 0 Likes
on
0 Posts
freshly built LS1 Long block 2000 LS1 block. Bored & Decked
Mahle Dished Piston: 3.908" Bore, 3.622" Stroke, 1.340" CH, -16cc Dish
Eagle H-beam Rods 6.125"
Patriot Performance LS6 Stage II, 64cc Chamber, 225cc Intake Runner
Comp Cams Valve Lift .584/.584, Duration 226/226, 112LSA
LS7 Lifter
Hardend Rods
SLP oil pump
ARP Main studs
GM Head Bolts
All new bearings, rings, all new gaskets, its is a long block with all covers on already, the oil pan is a truck oil pan so would need to be swapped to car if you have an Fbody
This motor is fresh off the build, bored, decked, cleaned, line bored... the works, it was built by a reputable shop in Pittsburgh, ICS automotive machines
I will try to get some pics up this weekend.
I really dont wanna ship this if I dont have to, but I am willing to deliver up to 300 miles from 15071 for a small fee.
Asking $4000obo
Everything in red has 0 miles on it, brand spankin new!
Mahle Dished Piston: 3.908" Bore, 3.622" Stroke, 1.340" CH, -16cc Dish
Eagle H-beam Rods 6.125"
Patriot Performance LS6 Stage II, 64cc Chamber, 225cc Intake Runner
Comp Cams Valve Lift .584/.584, Duration 226/226, 112LSA
LS7 Lifter
Hardend Rods
SLP oil pump
ARP Main studs
GM Head Bolts
All new bearings, rings, all new gaskets, its is a long block with all covers on already, the oil pan is a truck oil pan so would need to be swapped to car if you have an Fbody
This motor is fresh off the build, bored, decked, cleaned, line bored... the works, it was built by a reputable shop in Pittsburgh, ICS automotive machines
I will try to get some pics up this weekend.
I really dont wanna ship this if I dont have to, but I am willing to deliver up to 300 miles from 15071 for a small fee.
Asking $4000obo
Everything in red has 0 miles on it, brand spankin new!
Last edited by beastmode; 12-18-2008 at 07:29 AM.
12-18-2008, 06:14 AM
#2
Moderator
Thread Starter
iTrader: (52)
Join Date: Jul 2006
Location: Pittsburgh, PA
Posts: 7,009
Likes: 0
Received 0 Likes
on
0 Posts
Morning bump. If the asking price is to high feel free to make a reasonalbe offer 
Until I get the pics this weekend, here are a few of the heads I took and the block before the disassemble, it has since been cleaned and all that expensive crapola
Until I get the pics this weekend, here are a few of the heads I took and the block before the disassemble, it has since been cleaned and all that expensive crapola
12-18-2008, 07:06 PM
#6
Moderator
Thread Starter
iTrader: (52)
Join Date: Jul 2006
Location: Pittsburgh, PA
Posts: 7,009
Likes: 0
Received 0 Likes
on
0 Posts
Might consider this as a last resort... I have a buddy who might be interested in the heads. Ill see what I can do
If I do sell as a short block... I need a DEFINITE buyer.
