Oil Catch Can Parts List
#1
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Macclenny FL
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
Oil Catch Can Parts List
I'm looking for a parts list and possibly some pictures of some oil catch can setups. I did some reading on here and found a little bit but, all the threads were old and didn't have much info on how to set it up. Just curious to see what you're running.
-Thanks
-Thanks
#2
This is what I used -> http://www.thunderracing.com/catalog...&sid=776#P5920
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html
#4
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Macclenny FL
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
This is what I used -> http://www.thunderracing.com/catalog...&sid=776#P5920
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html
#5
11 Second Club
Thread Starter
iTrader: (5)
Join Date: Nov 2006
Location: Macclenny FL
Posts: 852
Likes: 0
Received 0 Likes
on
0 Posts
This is what I used -> http://www.thunderracing.com/catalog...&sid=776#P5920
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html
#6
12 Second Club
iTrader: (129)
I just did a catch can on my vette today and it seems to be working pretty well.
I used a Kobalt air compressor filter kinda like the husky filter from home depot that everyone used a few years back. Cost me $14 to do and looks clean as my toilet.
I used a Kobalt air compressor filter kinda like the husky filter from home depot that everyone used a few years back. Cost me $14 to do and looks clean as my toilet.
#7
This is what I used -> http://www.thunderracing.com/catalog...&sid=776#P5920
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html
Got the info here -> https://ls1tech.com/forums/lt1-lt4-m...ng-how-do.html
Thanks
Trending Topics
#9
I'm having a 6-point CM rollbar welded in this weekend.
Edit: Can is mounted to the coil stud on the driver's side, hoses connect it to the manifold.
Here's an old pic where you can see the top of it.
Last edited by James Montigny; 02-21-2009 at 02:35 PM.