LS1 Lid + LS1 rad support + stock hood = DONE
#241
#242
So i have the 98-02 front end conversion, but the top portion of the slp lid is hitting the underside of the SS hood, my lid support is not sitting flush on the frame rail so I am going to have to trim it up a bit tomorrow to try to get it to sit as flush as I can get it to.
looks good though for sure.
looks good though for sure.
#245
#247
For those of you that were wondering if this will work with a sunoco hood i have the answers!! I cut into my core support so the filter would sit down a little and still had to cut 2 notches in the front of the hood to close it all the way.
#249
just got done cutting mine down on the sides a little and underneath, hood closes no problem and doesn't really look like I did anything to the radiator support. this is on a 98-02 front end conversion.
#250
Hey guys I really apologize for this being down for so long, but the writeup is back online! It is a revised version of the last one, so there are some additional pictures and details, I hope it was worth the wait. Enjoy.
http://joelrdevriendt.com/?p=46
Again, sorry for the downtime!
http://joelrdevriendt.com/?p=46
Again, sorry for the downtime!
#252
I have read the whole thread and the write up....along with some other threads about this mod, but I have a couple questions:
1.) Does the radiator support cover or whatever you call the plastic piece that surrounds the lid/filter have to come from a LS1 car or just a 98+ car? In other words, would one from a V6 be the same? If this is a dumb question, my apologies....I haven't looked under the hood of any V6 F-bodies. Also, guess it may have been asked/answered, but I don't remember seeing it.
2.) I see this thread is titled "+stock hood" but it looks to be an SS hood in the pics.....which I realize is stock on some cars.....but has anyone done this with a stock/regular Z28 steel hood?
I can't bring myself to cut the core support of my 97 SS, but I have a 95 Z28 that I wouldn't feel so bad about doing some permanent mods to.
1.) Does the radiator support cover or whatever you call the plastic piece that surrounds the lid/filter have to come from a LS1 car or just a 98+ car? In other words, would one from a V6 be the same? If this is a dumb question, my apologies....I haven't looked under the hood of any V6 F-bodies. Also, guess it may have been asked/answered, but I don't remember seeing it.
2.) I see this thread is titled "+stock hood" but it looks to be an SS hood in the pics.....which I realize is stock on some cars.....but has anyone done this with a stock/regular Z28 steel hood?
I can't bring myself to cut the core support of my 97 SS, but I have a 95 Z28 that I wouldn't feel so bad about doing some permanent mods to.
#253
I've not heard of anyone using parts from a v6 car when I did this mod, I would think the intake was different.
I did this mod on mine with a stock z28 hood. It was a pretty tight fit but it worked. Great mod for the money, I think it looks really good. I have pics of what I cut and all on my page below.
I did this mod on mine with a stock z28 hood. It was a pretty tight fit but it worked. Great mod for the money, I think it looks really good. I have pics of what I cut and all on my page below.
#255
I have read the whole thread and the write up....along with some other threads about this mod, but I have a couple questions:
1.) Does the radiator support cover or whatever you call the plastic piece that surrounds the lid/filter have to come from a LS1 car or just a 98+ car? In other words, would one from a V6 be the same? If this is a dumb question, my apologies....I haven't looked under the hood of any V6 F-bodies. Also, guess it may have been asked/answered, but I don't remember seeing it.
2.) I see this thread is titled "+stock hood" but it looks to be an SS hood in the pics.....which I realize is stock on some cars.....but has anyone done this with a stock/regular Z28 steel hood?
I can't bring myself to cut the core support of my 97 SS, but I have a 95 Z28 that I wouldn't feel so bad about doing some permanent mods to.
1.) Does the radiator support cover or whatever you call the plastic piece that surrounds the lid/filter have to come from a LS1 car or just a 98+ car? In other words, would one from a V6 be the same? If this is a dumb question, my apologies....I haven't looked under the hood of any V6 F-bodies. Also, guess it may have been asked/answered, but I don't remember seeing it.
2.) I see this thread is titled "+stock hood" but it looks to be an SS hood in the pics.....which I realize is stock on some cars.....but has anyone done this with a stock/regular Z28 steel hood?
I can't bring myself to cut the core support of my 97 SS, but I have a 95 Z28 that I wouldn't feel so bad about doing some permanent mods to.
2) Yes its been done. The clearance issues will be entirely with the lid - here is a writeup using a lid and stock hood: http://www.lt1engine.com/tech/ls1-li...k-camaro-hood/
3) Thanks for the reminder. Ive been meaning to take a picture of the bottom of my hood, I had to cut a pretty substantial piece out. If you are worried about resale I would not do this mod, but if you are looking for power this is VERY worth having a couple cuts in the car.
#256
1) I believe the radiator support from a V6 car is the same, but the stock lid might be different - which you wouldnt be using anyway.
2) Yes its been done. The clearance issues will be entirely with the lid - here is a writeup using a lid and stock hood: http://www.lt1engine.com/tech/ls1-li...k-camaro-hood/
3) Thanks for the reminder. Ive been meaning to take a picture of the bottom of my hood, I had to cut a pretty substantial piece out. If you are worried about resale I would not do this mod, but if you are looking for power this is VERY worth having a couple cuts in the car.
2) Yes its been done. The clearance issues will be entirely with the lid - here is a writeup using a lid and stock hood: http://www.lt1engine.com/tech/ls1-li...k-camaro-hood/
3) Thanks for the reminder. Ive been meaning to take a picture of the bottom of my hood, I had to cut a pretty substantial piece out. If you are worried about resale I would not do this mod, but if you are looking for power this is VERY worth having a couple cuts in the car.
#257
So I can find any 98+ support....which should be alot easier than looking for LS1 stuff....and it will work since the clearance issue is with the lid. Then just get the SLP lid and filter....trim the core support and underside of the steel hood and I'm good. I don't want to do this to my SS, but I am really looking forward to this mod on the 95.....I just gotta rebuild the motor or find a good used LT1 first. lol
A good way to double check would be to lookup the part numbers on each. If they match, you are good to go!
#259
i was wondering if you guys could help me out i just bought a 1994 camaro z/28 and the guy gave me a glasstek SS fiberglass hood that hasnt been cut out yet for air induction. what would i need to buy to get complete ram air that looks like its never been changed? i dont want it 2 look like i did it at home with a hand saw