Fort Wayne Nasty's Bait Shop crowd
#1482
10 Second Club
iTrader: (4)
Join Date: Mar 2006
Location: Fort Wayne, IN
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Talked to Steve @ SJM (Bogarts) today. Those road race series wheels are pricey. Figure $2550 with billet caps. 17 by 9.5 and 11. Four weeks lead time. Hopefully, I can hang on to the loaners for a while. Otherwise, it's park the car for the winter. It's either the Bogarts or the CCW classics. Same money either way. Opinions? I'm leaning Bogarts for their resale. Have to take the measurements of the calipers and get them to Steve before he can get started.
#1483
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Update from Memphis. With the Powerglide and a convertor that is still slipping, we managed to run a 9.654 at 142.67. The 60 ft time was a 1.446, and would of been better but the car stood straight up and had to be peddled to keep from ending up on it's top. On it's way down to the ground, it stood straight up again when it hit 2nd gear. Brent said he could see the whole hood from the starting line!
We're going to see if we can swap converters this morning. Bob
We're going to see if we can swap converters this morning. Bob
#1484
11 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks Darren, It was running very well but we all feel looking at his time slips that there is some left in it. Time to go to a real track and start the suspension adjusting. Mike has a tnt nitrous kit that we have yet to install. First we want a 10.9 all motor pass then we will start installing and spraying it.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#1485
Banned
iTrader: (2)
Join Date: Feb 2005
Location: LEO INDIANA
Posts: 2,261
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
great run mike and scott.....bahoda's mustang has a saleen blower on it by the way......they tuned it to 500 rwhp and juice said he did not think it would hold......he was right....
and now for the update...just bought 2 corvettes today....so yes i am back up to three.......there goes my garage space again.......
and now for the update...just bought 2 corvettes today....so yes i am back up to three.......there goes my garage space again.......
![Burnout](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_burnout.gif)
#1487
11 Second Club
Thread Starter
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Boom Booom Boooom Fire oh **** Fire......... Kurt and I towed it back to the pits and I looked under it.....Lets just say there were parts everywhere and a large hole in the side of the block......
![Barf](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_barf.gif)
Josh, Memphis is got some great weather today wish you could have came down with us.......
#1491
TECH Apprentice
iTrader: (39)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Talked to Steve @ SJM (Bogarts) today. Those road race series wheels are pricey. Figure $2550 with billet caps. 17 by 9.5 and 11. Four weeks lead time. Hopefully, I can hang on to the loaners for a while. Otherwise, it's park the car for the winter. It's either the Bogarts or the CCW classics. Same money either way. Opinions? I'm leaning Bogarts for their resale. Have to take the measurements of the calipers and get them to Steve before he can get started.
You can use them untill you get your other wheels.. Just keep in touch with me if your going to need them for a while..
![Icon Cool](https://ls1tech.com/forums/images/smilies2/icon_cool.gif)
#1496
Banned
iTrader: (2)
Join Date: Feb 2005
Location: LEO INDIANA
Posts: 2,261
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey joe how many people "head count" are comming over on the 21st?
also my c6 wheels are for sale......1500.00 chromes and almost new supercar f1's.....the tires have 200 miles on them at most.....
also my c6 wheels are for sale......1500.00 chromes and almost new supercar f1's.....the tires have 200 miles on them at most.....
#1498
10 Second Club
iTrader: (4)
Join Date: Mar 2006
Location: Fort Wayne, IN
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So what do you guys think: Bogarts or CCWs?
#1499
TECH Apprentice
iTrader: (39)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I appreciate that. I'm waiting for my local contract to get agreed to and ratified before I do anything. Hopefully, that won't be much more than a week or 10 days. If so, I'll need them for 5-6 weeks total. If you need them sooner than that, I'll be happy to return them and just park the car.
So what do you guys think: Bogarts or CCWs?
So what do you guys think: Bogarts or CCWs?
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
#1500
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I appreciate that. I'm waiting for my local contract to get agreed to and ratified before I do anything. Hopefully, that won't be much more than a week or 10 days. If so, I'll need them for 5-6 weeks total. If you need them sooner than that, I'll be happy to return them and just park the car.
So what do you guys think: Bogarts or CCWs?
So what do you guys think: Bogarts or CCWs?
Did you spray out of the hole on the 10.45 run (not bad for **** muncie track on cold rainy day!)?
Go to Darren's house and "borrow" his 9 inch, just to see how it fits
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
With 3.73 and a hard launch, it should be low to mid 1.4 short times on the juice.
Take the 10 bolt out this winter and sell it (Slightly used 10 bolt, no drag strip passes, out of 6 cylinder for sale)
Still using the 325-45-17 tires on back?
I would get some 15 inch for the rear, and use the 325-50-15 MT ET STreets, like the turbo Blue camaro has in town, his set up is nice, but you got to grind and so forth. I wouldn't spend all that $$$ on different rims to be honest, or look for some used ones in the for sale section at least first.