Iowa Fastest Cars?
#1221
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am heading up to CFR on Saturday, May 3rd. Would like to finally get some cooler weather runs with the car.
Also, for those of you not going to Speed, Inc. the guys on SVTP are putting together a little lunch/cruise deal that day. It is primarily for the SVT cars in regards to initial parking, but open to anyone that wants to hang out and cruise.
Starting at Buffalo Wild Wings in West Des Moines and cruising from there out to Saylorville where a shelter has been rented. And just hang out from there.
Here are a couple of links for more information if you are interested:
http://www.svtperformance.com/forums...d.php?t=449876
http://www.svtperformance.com/forums...d.php?t=477900
Also, for those of you not going to Speed, Inc. the guys on SVTP are putting together a little lunch/cruise deal that day. It is primarily for the SVT cars in regards to initial parking, but open to anyone that wants to hang out and cruise.
Starting at Buffalo Wild Wings in West Des Moines and cruising from there out to Saylorville where a shelter has been rented. And just hang out from there.
Here are a couple of links for more information if you are interested:
http://www.svtperformance.com/forums...d.php?t=449876
http://www.svtperformance.com/forums...d.php?t=477900
#1226
TECH Fanatic
iTrader: (26)
Join Date: Oct 2003
Location: Waukee, Iowa
Posts: 1,564
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Damn Scott, we need to quit hanging out with each other or something, our cars like phucking with us at the same time....I just got done with the rockers & I put the over flow tank back in, with most of the water drained out of it. We'll see what happens now.
#1227
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Dont give up on it scott, I guess if you get that sick of it i do have some empty space to fill in the shop ill sure take it off your hands ![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Well guys since i didnt have mine ready last saturday I started putting it back together. Its basically ready to roll just need to put in the inner fenderwells and adjust the y pipe a little bit more rattles a everyonce in awhile in gear.
Heres a couple pictures, they're shitty, from my cell phone.
![](http://i49.photobucket.com/albums/f289/cavytek/04-09-08_2208.jpg)
![](http://i49.photobucket.com/albums/f289/cavytek/04-09-08_2211.jpg)
Definetly cant wait for a decent day to get it out.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Well guys since i didnt have mine ready last saturday I started putting it back together. Its basically ready to roll just need to put in the inner fenderwells and adjust the y pipe a little bit more rattles a everyonce in awhile in gear.
Heres a couple pictures, they're shitty, from my cell phone.
![](http://i49.photobucket.com/albums/f289/cavytek/04-09-08_2208.jpg)
![](http://i49.photobucket.com/albums/f289/cavytek/04-09-08_2211.jpg)
Definetly cant wait for a decent day to get it out.
Last edited by 355z28; 04-09-2008 at 11:39 PM.
#1230
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
thanks guys, it still has some flaws but thats what you get with a 12 year old car.
yeah Brett i had to clean it up some so it doesnt look like a complete peice of **** next to yours at LS prom lol.
Im thinking im going to take it on the 27th to the speedway to do a couple passes just to get an idea of what i have.
Also i dont know if anyone interested but i purchased a bunch of 4130 chromoly tubing to remake my lower control arms and to make my subframe connectors. ill be makeing 2 or 3 sets 2 for sure and was just wondering if anyone would be interested in a set of 2 point SFC's they'll be powder coated red, they're .095 chromoly so they'll be pretty light but really strong. Ill take some pictures when i get them together.
yeah Brett i had to clean it up some so it doesnt look like a complete peice of **** next to yours at LS prom lol.
Im thinking im going to take it on the 27th to the speedway to do a couple passes just to get an idea of what i have.
Also i dont know if anyone interested but i purchased a bunch of 4130 chromoly tubing to remake my lower control arms and to make my subframe connectors. ill be makeing 2 or 3 sets 2 for sure and was just wondering if anyone would be interested in a set of 2 point SFC's they'll be powder coated red, they're .095 chromoly so they'll be pretty light but really strong. Ill take some pictures when i get them together.
Last edited by 355z28; 04-10-2008 at 08:31 AM.
#1232
TECH Fanatic
iTrader: (26)
Join Date: Oct 2003
Location: Waukee, Iowa
Posts: 1,564
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
The good news is, none of the bolts or threads are messed up, so there shouldn't be any ill effects on anything....They got plenty of red locktite on them this time!
Last edited by Unstang; 04-10-2008 at 12:10 PM.
#1236
11 Second Club
iTrader: (12)
Join Date: May 2005
Location: Cedar Rapids, IA
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey scott, was your security light on man when you had nothing??? If it was the vats was on. The wires that go to the inginition lock cyl. actually rotate with the tumbler every time you turn the key, so it eventually rubs through the wire and causes the vats to kick in and thinks your trying to steal the car. An easy way to bypass it would have been to read the resistance of the chip on your key, go to radio shack and get resistors to add up to within + or - 10 ohms of the chip value, then put them in the end of the vats plug, under the drivers side dash panel (under the steering column, Orange wire) ive done it to my TA, and hope to never have that problem again.
#1237
TECH Fanatic
iTrader: (26)
Join Date: Oct 2003
Location: Waukee, Iowa
Posts: 1,564
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey scott, was your security light on man when you had nothing??? If it was the vats was on. The wires that go to the inginition lock cyl. actually rotate with the tumbler every time you turn the key, so it eventually rubs through the wire and causes the vats to kick in and thinks your trying to steal the car. An easy way to bypass it would have been to read the resistance of the chip on your key, go to radio shack and get resistors to add up to within + or - 10 ohms of the chip value, then put them in the end of the vats plug, under the drivers side dash panel (under the steering column, Orange wire) ive done it to my TA, and hope to never have that problem again.
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
#1238
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So i'm tired of this crappy weather... I was cruising around for a bit but it's raining so hard I kept hydroplaning. Fun times. SO here I sit....
Hey if you guys are bored and wanna check something out go to www.myspace.com/blacksaintscartel
I'm their band manager (marketing director)... I book their shows and stuff. **I'm "Jody" in their top friends list by the way.. check it out?
Hey if you guys are bored and wanna check something out go to www.myspace.com/blacksaintscartel
I'm their band manager (marketing director)... I book their shows and stuff. **I'm "Jody" in their top friends list by the way.. check it out?
#1239
On The Tree
iTrader: (21)
Join Date: Oct 2004
Location: Altoona, Iowa
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It was a busted wire on that lock cylinder. It's fixed now, just need to get it home sometime. I will have the wife drop me off tomorrow night to pick it up.
Last edited by caged02; 04-28-2008 at 03:49 PM.
#1240
TECH Apprentice
iTrader: (1)
Join Date: Jul 2002
Location: Des Moines, IA
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Do we want to plan another Rookie's gathering on a Saturday night again? That place seems to be the spot. I mean $2.50 tall boys and some decent food and great parking and a great spot its the best of all worlds IMO.