XPracing true duals..!!.DO NOT USE XPracing IN OKC!!
03-17-2011, 06:26 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: OKC,OK
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
XPracing true duals..!!.DO NOT USE XPracing IN OKC!! These are pics of my true duals that cost me $450 done by xpracing in oklahoma city, Brett the owner is a POS. and as you can see by the pic's you can see what kind of work he does. Mufflers arnt even pointed in the same direction,not even centered under car, welds look like they where done by a 5th grader, And he clamis to build the fastest LXS cars in OKlahoma. I tried contacting him and got nothing. after asking around and posting up about it i found out he has a pretty good reputation of conducting his shop in this manner. So if your in Oklahoma. or surrounding states,!!!! DO NOT USE XPracing!!!
03-17-2011, 06:53 PM
#4
TECH Resident
iTrader: (4)
Join Date: Apr 2009
Location: Eau Claire-ish, WI
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
Jesus, how could he charge that much for that?? Two straight pieces of pipe and two mufflers, a lot of work went into that exhaust 
Any reason you didn't just go with TSP duals or something similar?
Any reason you didn't just go with TSP duals or something similar?
03-17-2011, 07:03 PM
#5
Teching In
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: OKC,OK
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I paid for the mufflers also.
I thought i was getting somthing like the TSP kit, i did tell him i didnt want an X cuz i was trying to save some money....But if i would have known it was gonna cost me that much i would have just bought the TSP kit and bolted it on myself and got an X-pipe
Yeah thats $225 in labor your looking at!
I haft to look at it everyday and i sure dont see that much labor
I thought i was getting somthing like the TSP kit, i did tell him i didnt want an X cuz i was trying to save some money....But if i would have known it was gonna cost me that much i would have just bought the TSP kit and bolted it on myself and got an X-pipe
Yeah thats $225 in labor your looking at!
I haft to look at it everyday and i sure dont see that much labor
03-18-2011, 11:57 PM
#7
TECH Resident
iTrader: (4)
Join Date: Apr 2009
Location: Eau Claire-ish, WI
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
I paid for the mufflers also.
I thought i was getting somthing like the TSP kit, i did tell him i didnt want an X cuz i was trying to save some money....But if i would have known it was gonna cost me that much i would have just bought the TSP kit and bolted it on myself and got an X-pipe
Yeah thats $225 in labor your looking at!
I haft to look at it everyday and i sure dont see that much labor
I thought i was getting somthing like the TSP kit, i did tell him i didnt want an X cuz i was trying to save some money....But if i would have known it was gonna cost me that much i would have just bought the TSP kit and bolted it on myself and got an X-pipe
Yeah thats $225 in labor your looking at!
I haft to look at it everyday and i sure dont see that much labor
Trending Topics
03-20-2011, 01:08 AM
#10
Launching!
Join Date: Jan 2008
Location: unknown
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
You got pucked over, i have seen true duals made all the way back to the rear bumper for $200. you could have bought a tsp true dual setup with a cross over x pipe for that price. you need to go to people you "know" do a great job not people who "talk" work on great cars. Im sure it at least sounds good.
03-21-2011, 10:35 PM
#14
Brett runs a very reputable shop, he built my old T/A from the ground up and has countless happy customers, including myself. I find it hard to believe he charged you that much for those, very hard, I'll actually go by there tomorrow and see if he can pull the receipt, that's a chunk.
I know the backstory on this, and you never approached XP in a professional manner after you weren't happy. If you had I guarantee Brett would have taken care of you, instead you went internet warrior trying to stir the pot and talk crap. Like begets like. Don't threaten to sue someone then complain on the internet.
You can buy proven TD's from site sponsors (http://texas-speed.com/shop/item.asp...d=196&catid=56) why didn't you do that?
I know the backstory on this, and you never approached XP in a professional manner after you weren't happy. If you had I guarantee Brett would have taken care of you, instead you went internet warrior trying to stir the pot and talk crap. Like begets like. Don't threaten to sue someone then complain on the internet.
You can buy proven TD's from site sponsors (http://texas-speed.com/shop/item.asp...d=196&catid=56) why didn't you do that?
03-22-2011, 12:14 AM
#16
Launching!
iTrader: (19)
Join Date: Jun 2006
Location: arkansas
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
I agree with Trust, Brett has always been cool to me and done a great job, he done the tuning on my trans am and also the 6-speed swap on it, never had any problem with anything he has done or had a problem contacting him, you should prob get your **** straight before you go bad mouthing someone's business over the internet.......
03-22-2011, 11:28 AM
#17
On The Tree
iTrader: (1)
Join Date: Dec 2002
Location: roanoke,va
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
bad mouthing the company and making threats was not the right thing to do, BUT charging 450 for straight pipe and 2 mufflers is not right either. proper thing to do would have been telling the customer to save there money until they could afford a good exhaust system
03-22-2011, 12:24 PM
#18
On The Tree
Join Date: Jul 2004
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
If your judgment skills are anything like your ability to spell - i would be led to assume it's your fault for not handling the situation properly.
btw I don't know anyone that would get any kind of work done without knowing at least a round-about end cost, first.
If a shop can't figure that out, especially on a small project like that, then chances are you don't want them to do work on your car anyway.
btw I don't know anyone that would get any kind of work done without knowing at least a round-about end cost, first.
If a shop can't figure that out, especially on a small project like that, then chances are you don't want them to do work on your car anyway.
03-22-2011, 07:53 PM
#19
Launching!
iTrader: (2)
Join Date: Sep 2005
Location: Bartlesville, OK
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
This tool has been saying bad stuff about XP all over. Brett @ XP is one of the greatest guys I've met and does hella work on cars. Just finished up my TBSS.
