tunnel mount tq arm with td's
#1
12 Second Club
Thread Starter
iTrader: (5)
Join Date: May 2009
Location: pooler, ga
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i have a spohn tunnel mount tq arm for lt's and am about to trade my magnaflow cb for a tsp td set up and am wondering if anybody knows if the td's will fit with the tq arm the way it is.
#2
FormerVendor
iTrader: (18)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They won't clear. I tried the same combo on my car a couple years back and it is not possible. No matter how much cutting on the exhaust and spacing on the TA it won't clear. Go with a tranny mounted TA and then get the TA relocation kit that gets it off the tail shaft and you should be good!
Jon
Jon
#4
FormerVendor
iTrader: (18)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't think so. If you go with the flat cross member it puts the x-pipe too low and it won't go through the cross member that is bent to allow for the exhaust to go above it. I looked at everything and couldn't make it work. At least not that I thought would work very well.
Jon
Jon