Avoiding N20 on 1st gear?
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Location: Iowa
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was wondering the best way to NOT have nitrous for first gear, but have it for the rest. Im getting the MSD window switch, and the WOT in the Zex, but is there any way of avoiding nitrous in first gear?If I have my window at 3 or something like that, I dont want first having N20 because I will be dumping the clutch somewhere in there, and its way to short of a gear in my car yet. Is my only option a button?
#2
FormerVendor
iTrader: (25)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Instead of geting the MSD window switch get the Trick windowswitch. It is a digital unit with any gear lock out,dual window switch, and TPs. So you can simply set it not to spray in first gear
Here is a link
http://www.nitrousoutlet.com/outlet/...section_id=137
Dave
Here is a link
http://www.nitrousoutlet.com/outlet/...section_id=137
Dave
#4
12 Second Club
iTrader: (17)
Join Date: Oct 2004
Location: Houston, TX
Posts: 1,404
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
if you want to do it a cheap way you can rig up a micro switch that turns off when in first and wire that in. Someone on here did that. that electronic piece would obviously be better though
#7
11 Second Club
iTrader: (15)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
micro switch on the gear shifter wired in that opens the circuit thus keepin it off while in first..soon as you shift, micro-switch opens, closed the circuit, boom, instant juice. it will cost you about $20.00 to do.
there are hi tech ways of doin things as dave has stated so you do as your means allow. goodluck.
there are hi tech ways of doin things as dave has stated so you do as your means allow. goodluck.
Trending Topics
#8
TECH Fanatic
iTrader: (1)
Join Date: Mar 2004
Location: Southern NH
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thats assuming you manually shift the car. I leave mine in "D" when I race.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Originally Posted by TNTramair
micro switch on the gear shifter wired in that opens the circuit thus keepin it off while in first..soon as you shift, micro-switch opens, closed the circuit, boom, instant juice. it will cost you about $20.00 to do.
there are hi tech ways of doin things as dave has stated so you do as your means allow. goodluck.
there are hi tech ways of doin things as dave has stated so you do as your means allow. goodluck.
#9
Launching!
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Location: Iowa
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 860 Performance
Thats assuming you manually shift the car. I leave mine in "D" when I race.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
lol, yea, M6 here obviously....How much is that system Dave?I heard the MSD was king s*** for the window switches. How does that system work blocking first?
Is the other option ppl have been mentioning a "do it yourselfer", or is there somethign to buy?Im not familiar with that setup there. Is it safe?
#10
FormerVendor
Join Date: Apr 2005
Location: Wichita Falls,Tx
Posts: 864
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They various window switches with first gear lockouts work the best in my opinion. The Trick Shift that Dave carries has the ability to lockout the nitrous system in any gear, so if need be you could lock out second gear too (just an option). Plus, it has the TPS built into it for the wide open throttle activation.
The other option that has been mentioned is a "do-it-yourself" project that is very simple to install. It just involves a micro switch and some wiring.
The other option that has been mentioned is a "do-it-yourself" project that is very simple to install. It just involves a micro switch and some wiring.
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey im still new to the board, Anyway Puttin the car in Manual Low (1st), then shifting to second will actually be better for your tranny and the life of it. 4l60E's and what not have more line pressure and hold the clutches inside the transmission harder thus not slipping as easily and hittin the gear harder. By all means nothing you will notice just a little insider info.
just my 2cents.......im sure ill have people argue me
just my 2cents.......im sure ill have people argue me
Last edited by Tryit; 12-09-2005 at 03:13 PM.
#12
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here it is, homemade 1st gear lock out, total cost $3.00. You need to get a three terminal wot at radio smack. Then just wire it inline with your wot wiring, but opposite, thus 3-terminal. make sense? Works great and over 125 1/4 mile pulls. Oics from my web site:
and WOT sw at throttle pedal:
Robert
![](http://home.comcast.net/~weaver.robert/wsb/media/779908/site1056.jpg)
and WOT sw at throttle pedal:
![](http://cemozone.com/lolita/images/n2o_system/wot_switch01.jpg)
Robert
#15
TECH Addict
iTrader: (70)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Robert56
Here it is, homemade 1st gear lock out, total cost $3.00. You need to get a three terminal wot at radio smack. Then just wire it inline with your wot wiring, but opposite, thus 3-terminal. make sense? Works great and over 125 1/4 mile pulls. Oics from my web site:
and WOT sw at throttle pedal:
Robert
![](http://home.comcast.net/~weaver.robert/wsb/media/779908/site1056.jpg)
and WOT sw at throttle pedal:
![](http://cemozone.com/lolita/images/n2o_system/wot_switch01.jpg)
Robert
i thought about the one on the gas pedal (like yours) and also another at the clutch so you can have your foot on the floor before you launch
#18
Closed ex-Sponsor Account
iTrader: (1)
Join Date: Jul 2004
Location: Wichita Falls, TX
Posts: 2,797
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Looking at the controller of Daves, you could wire it up to delay the nitrous in first until you got to a hire rpm and then engage.. Really a nice piece from what I can read.
Ricky
Ricky
#20
TECH Fanatic
iTrader: (12)
Join Date: Feb 2004
Location: Mass
Posts: 1,600
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Robert56
Here it is, homemade 1st gear lock out, total cost $3.00. You need to get a three terminal wot at radio smack. Then just wire it inline with your wot wiring, but opposite, thus 3-terminal. make sense? Works great and over 125 1/4 mile pulls. Oics from my web site:
and WOT sw at throttle pedal:
Robert
![](http://home.comcast.net/~weaver.robert/wsb/media/779908/site1056.jpg)
and WOT sw at throttle pedal:
![](http://cemozone.com/lolita/images/n2o_system/wot_switch01.jpg)
Robert
BTLFEDSS