View Poll Results: timing tuner/ iat mod/ tune
timing tuner
![](https://ls1tech.com/forums/images/polls/bar2-l.gif)
![](https://ls1tech.com/forums/images/polls/bar2.gif)
![](https://ls1tech.com/forums/images/polls/bar2-r.gif)
![](https://ls1tech.com/forums/clear.gif)
28
39.44%
iat mod
![](https://ls1tech.com/forums/images/polls/bar3-l.gif)
![](https://ls1tech.com/forums/images/polls/bar3.gif)
![](https://ls1tech.com/forums/images/polls/bar3-r.gif)
![](https://ls1tech.com/forums/clear.gif)
15
21.13%
tune
![](https://ls1tech.com/forums/images/polls/bar4-l.gif)
![](https://ls1tech.com/forums/images/polls/bar4.gif)
![](https://ls1tech.com/forums/images/polls/bar4-r.gif)
![](https://ls1tech.com/forums/clear.gif)
28
39.44%
Voters: 71. You may not vote on this poll
timing tuner vs. iat mod vs. tune it out
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Robert56
I didn't vote cause dry wasn't an option. you wouldn't have to worry about any of the suggestions in the poll.
Robert
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Robert
Trending Topics
#11
Staging Lane
Join Date: May 2006
Location: Detroit, MI ... yes Detroit
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by VH5150
I say IAT mod... Its the easiest... Just make sure you flip the switch before you spray......
![Metoo](https://ls1tech.com/forums/images/smilies2/metoo.gif)
IAT mod, is cheap, simple and you can go back and forth with a simple flip of the switch. Or if you want, you can eliminate the need for a separate switch and wire in an extra relay to your nitrous arming switch and have it pull timing when you arm nitrous.
#13
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ls2 bait
which would u choose and why for pulling timing. 150 wet shot. just pull it out of the tune and run it that way all the time or use one of the others.
Robert
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Robert56
I voted tune, however, from the dry perspective. No iat, timing tuner, or n/a timing pull needed. just set up your tune to pull while spraying only and not effect your n/a tune. If it's under a 200 shot and wet, the couple degrees pulled in the tune won't matter much n/a and you'll never notice.
Robert
Robert
#15
Restricted User
iTrader: (17)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by bbradyc5
![Metoo](https://ls1tech.com/forums/images/smilies2/metoo.gif)
IAT mod, is cheap, simple and you can go back and forth with a simple flip of the switch. Or if you want, you can eliminate the need for a separate switch and wire in an extra relay to your nitrous arming switch and have it pull timing when you arm nitrous.
![Secret2](https://ls1tech.com/forums/images/smilies/LS1Tech/secret.gif)