Ls7 Plate Nitrous Kit
#4
FormerVendor
iTrader: (6)
Joined: Nov 2007
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
From: Glenolden, PA
as everyone else said, the 90mm plate will fit your ls7.
our sale is still going on for our 90mm plate kit, incredible deal.
https://ls1tech.com/forums/nitrous-oxide/822132-holiday-special-plate-kit-pricing.html
our sale is still going on for our 90mm plate kit, incredible deal.
https://ls1tech.com/forums/nitrous-oxide/822132-holiday-special-plate-kit-pricing.html
Trending Topics
#9
Thread Starter
Banned
Joined: Jan 2007
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
From: Chesterton, IN
Well email me with information on the kit I want... I want a 90mm plate LS7 wet nitrous kit, without bottle and feed line, to push up to 250hp. What type of pricing can you both offer me? Please advise.
#12
TECH Resident
iTrader: (48)
Joined: Sep 2007
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
From: Miami, FL
yes but the daves plates are the best plates out, and if you want over 200hp then they are your only choice. just remeber you get what you pay for. not to mention that Daves has the best customer service i have ever encountered
#13
FormerVendor
iTrader: (6)
Joined: Nov 2007
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
From: Glenolden, PA
Let us know what we can help you with. We offer the best prices in the industry with the best quality kits. We offer the ONLY 360 degree spray pattern on the market which is held to the tightest of tolerances. If you do in fact plan on going over 200 i would just go right for the direct port setup. I would much rather be shooting a 250 shot right into the intake runners then dumping all that fuel and nitrous into my manifold. The direct port will decrease your chances of a big back fire. That or you could use our dual stage dry kit with the "interface" to go over a 200 shot.
#14
Thread Starter
Banned
Joined: Jan 2007
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
From: Chesterton, IN
Let us know what we can help you with. We offer the best prices in the industry with the best quality kits. We offer the ONLY 360 degree spray pattern on the market which is held to the tightest of tolerances. If you do in fact plan on going over 200 i would just go right for the direct port setup. I would much rather be shooting a 250 shot right into the intake runners then dumping all that fuel and nitrous into my manifold. The direct port will decrease your chances of a big back fire. That or you could use our dual stage dry kit with the "interface" to go over a 200 shot.
#15
FormerVendor
iTrader: (25)
All I can say is you get what you pay for. We design our products to flow X amount to make X amount of power and meet a certain standard of quality that we can be proud of to have our name on. We then price our products at a fair price according to build cost.
If you want the highest quality, highest flowing products backed by the most knowledgable staff with full time tech service that answers the phones full time, responds to pms, emails and post on the boards with actual technical information our products and our company is the company for you.
If you determain what is a great product by the price it is being sold for our products and are company may not be the choice for you.
I hope this does not come across to harsh. I am not banging on anyone elses products nor comparing them to ours. Im stating what our products and our company are all about.
Let me know if I can help in any way.
Thanks
Dave
#16
Thread Starter
Banned
Joined: Jan 2007
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
From: Chesterton, IN
Sorry,
All I can say is you get what you pay for. We design our products to flow X amount to make X amount of power and meet a certain standard of quality that we can be proud of to have our name on. We then price our products at a fair price according to build cost.
If you want the highest quality, highest flowing products backed by the most knowledgable staff with full time tech service that answers the phones full time, responds to pms, emails and post on the boards with actual technical information our products and our company is the company for you.
If you determain what is a great product by the price it is being sold for our products and are company may not be the choice for you.
I hope this does not come across to harsh. I am not banging on anyone elses products nor comparing them to ours. Im stating what our products and our company are all about.
Let me know if I can help in any way.
Thanks
Dave
All I can say is you get what you pay for. We design our products to flow X amount to make X amount of power and meet a certain standard of quality that we can be proud of to have our name on. We then price our products at a fair price according to build cost.
If you want the highest quality, highest flowing products backed by the most knowledgable staff with full time tech service that answers the phones full time, responds to pms, emails and post on the boards with actual technical information our products and our company is the company for you.
If you determain what is a great product by the price it is being sold for our products and are company may not be the choice for you.
I hope this does not come across to harsh. I am not banging on anyone elses products nor comparing them to ours. Im stating what our products and our company are all about.
Let me know if I can help in any way.
Thanks
Dave
#17
FormerVendor
iTrader: (25)
Scott,
I am not crazy about being put in a corner of opening the area for arguement about whose products are better. Those arguement never work out for the best of anyone and just turn into a bunch of opinion stated bickering back and forth. I can not speak for any other companies products.
All I can say is that our products speak for them selfs. Do a search here on the board. Look at all the listed dyno charts and cars running great numbers with our products. Look at the installs and how well designed our products are to offer the cleanest ans safest isntall. When you put one of our systems in your hand and on your car you will see the rest for your self.
Our plates will flow over 400HP
Our Solenoids flow over 400HP
Our Nitrous solenoid come standard with the purge port design.
Our bottle valve will flow over 800HP and has dual accessory ports with added valve stem support from the heavy duty ****.
We let our products and customer service do the talking for us.
Dave
I am not crazy about being put in a corner of opening the area for arguement about whose products are better. Those arguement never work out for the best of anyone and just turn into a bunch of opinion stated bickering back and forth. I can not speak for any other companies products.
All I can say is that our products speak for them selfs. Do a search here on the board. Look at all the listed dyno charts and cars running great numbers with our products. Look at the installs and how well designed our products are to offer the cleanest ans safest isntall. When you put one of our systems in your hand and on your car you will see the rest for your self.
Our plates will flow over 400HP
Our Solenoids flow over 400HP
Our Nitrous solenoid come standard with the purge port design.
Our bottle valve will flow over 800HP and has dual accessory ports with added valve stem support from the heavy duty ****.
We let our products and customer service do the talking for us.
Dave
#19
Thread Starter
Banned
Joined: Jan 2007
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
From: Chesterton, IN
Well guys, after speaking with Dave privately, I definitely decided to go with his product and company. The other nitrous suppliers (2 in specific) on the board, did not want to work with me when I needed a no bottle kit and did not even reply to my faxes or emails. Customer service is priceless!
#20
FormerVendor
iTrader: (25)
Well guys, after speaking with Dave privately, I definitely decided to go with his product and company. The other nitrous suppliers (2 in specific) on the board, did not want to work with me when I needed a no bottle kit and did not even reply to my faxes or emails. Customer service is priceless!
We aim to please.
Thanks
Dave