FS-Moser 12 Bolt/Willwood Brakes/Driveshaft
06-18-2009, 09:02 AM
#1
FS-Moser 12 Bolt/Willwood Brakes/Driveshaft-New Price All,
I have a Moser 12 bolt, Willwood Brakes and DS for sale or trade for a Lt1 10 bolt with either 3:73 or 4:10 gears with lt1 brakes and stock driveshaft plus cash. Located in Syracuse, NY
Moser 12 Bolt with Spool- New Style Ford Axle Housing Ends(2200.00)
4:11 Gears
33 Spline Axles
Upgraded Aluminum Cover
Welded in Lower Control Arm Relocation Brackets(115.00)
Willwood 6 Piston Caliper Brakes with two peice Rotors(650.00)
3" Steel Driveshaft Made by Frey Wheel with 1350 Yokes. Shortned 2" from stock.(225.00)
The rear end has a total of 60 track passes and some street miles. It's very quiet and performs flawlessley. The rear currently has 1/2" studs with are larger than stock. I will include 1/2" weld wheel lugs if the buyer is interested. The brake setup has only 1000 miles on it if that. The brakes DO NOT have a e-brake provision. Because the Axle housings are ford ends, Lt1/Ls1 brakes will not work.
I'm looking for an outright sale price of 2000.00 OBO for the rear,brakes and DS. I'll also do 1800.00 OBO for all plus a 10 bolt,brakes and DS.
If this sells, I will also have an Sphoon adjustable TA with seperate DS Loop,J&M Lower control arms and Panhard rod. I'll also have my set of Weld Pro Stars with 28" slicks with lugs and spacers for sale as well. If you have any questions, please feel free to PM me. I prefer not to ship but will meet anyone in the North East.
I have a Moser 12 bolt, Willwood Brakes and DS for sale or trade for a Lt1 10 bolt with either 3:73 or 4:10 gears with lt1 brakes and stock driveshaft plus cash. Located in Syracuse, NY
Moser 12 Bolt with Spool- New Style Ford Axle Housing Ends(2200.00)
4:11 Gears
33 Spline Axles
Upgraded Aluminum Cover
Welded in Lower Control Arm Relocation Brackets(115.00)
Willwood 6 Piston Caliper Brakes with two peice Rotors(650.00)
3" Steel Driveshaft Made by Frey Wheel with 1350 Yokes. Shortned 2" from stock.(225.00)
The rear end has a total of 60 track passes and some street miles. It's very quiet and performs flawlessley. The rear currently has 1/2" studs with are larger than stock. I will include 1/2" weld wheel lugs if the buyer is interested. The brake setup has only 1000 miles on it if that. The brakes DO NOT have a e-brake provision. Because the Axle housings are ford ends, Lt1/Ls1 brakes will not work.
I'm looking for an outright sale price of 2000.00 OBO for the rear,brakes and DS. I'll also do 1800.00 OBO for all plus a 10 bolt,brakes and DS.
If this sells, I will also have an Sphoon adjustable TA with seperate DS Loop,J&M Lower control arms and Panhard rod. I'll also have my set of Weld Pro Stars with 28" slicks with lugs and spacers for sale as well. If you have any questions, please feel free to PM me. I prefer not to ship but will meet anyone in the North East.
Last edited by lower_the_dynamite; 07-28-2009 at 12:05 PM.
07-29-2009, 09:09 AM
#6
Teching In
iTrader: (1)
Join Date: Oct 2007
Location: Orange Park, FL.
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Has the rear end been narrowed or factory width? Do you have a complete set of prostars or just the rears? What size rims? Asking cause I would be interested in a package deal depending on what you have..
Thanks,
Jason
Thanks,
Jason
07-29-2009, 09:21 AM
#7
Whats the reason for selling. I have a factory 10 bolt with 373 and bmr panhard bar?? i believe.
I need a 12 bolt for two of my cars my 67 and my 94. Let me know and we can try and work something out, I don't have the money this week due to a non-planned headgasket explosion but next check I should be good.
I need a 12 bolt for two of my cars my 67 and my 94. Let me know and we can try and work something out, I don't have the money this week due to a non-planned headgasket explosion but next check I should be good.
