Orygun guys?
#9024
#9025
TECH Resident
iTrader: (4)
Join Date: Dec 2010
Location: Oregon
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
My fender lip is right at 32". Running a 32" tire must barely fit in there. Even at stock height.
What's the plan for the engine?
#9027
11 Second Club
iTrader: (37)
Mines at 32.5 front and 33.5 rear with a 3/5 drop. No rubbing and could easily go down another 1" up front an 1.5" in the back.
Engine will be an iron block 5.7 w LS6 rotating assy, 228/230 cam and I'm going to hand port some 799 heads. A TBSS intake with 90mm tb, 1-7/8" headers, custom exhaust. Goal is 420-430 at the wheels through the T56. Should be a fun and reliable driver that can maybe tow the Z28 to the track someday.
Mike
#9031
TECH Resident
iTrader: (4)
Join Date: Dec 2010
Location: Oregon
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Well, since we're running heavy slow things, I'd like to show up and get some baseline numbers in. I've never been to PIR. My goal is to get my truck into the 11's some day.
How much does it cost to do some runs? How fast can I go before I require roll cages and all that?
How much does it cost to do some runs? How fast can I go before I require roll cages and all that?
#9032
11 Second Club
iTrader: (37)
Well my friend Tim (SalvageZ28) just picked up a 03 RCSB and he ran his the same night I ran mine. I his best was a 15.4, bone stock.
I haven't checked out NHRA rules lately but the last I hear was that you would have to run quicker than an 11.4 before requiring a roll cage.
I'll post up here if I make it out there again once I get the gears and 6sp installed.
Mike
I haven't checked out NHRA rules lately but the last I hear was that you would have to run quicker than an 11.4 before requiring a roll cage.
I'll post up here if I make it out there again once I get the gears and 6sp installed.
Mike
#9033
TECH Resident
iTrader: (4)
Join Date: Dec 2010
Location: Oregon
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Awesome. Thank you.
I've never been to the track, but using a g-tech and and a dyno app on my iphone, I ran a 16.15 mostly stock. There's a tune and shorty headers, but I'm AWD RCSB. I'm right on the brink of installing my nitrous kit. So I'll run again and see what I get.
I've never been to the track, but using a g-tech and and a dyno app on my iphone, I ran a 16.15 mostly stock. There's a tune and shorty headers, but I'm AWD RCSB. I'm right on the brink of installing my nitrous kit. So I'll run again and see what I get.
#9034
TECH Regular
iTrader: (3)
Join Date: Sep 2004
Location: Vancouver, Washington
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
13.99 and quicker you will need a helmet.
11.49 to 10.00 you will need a roll bar, 5 point harness, and some other safety items I don't remember without looking up.
9.99 to 8.00 you will need a roll cage, competition license, parachute, and even more safety equipment.
11.49 to 10.00 you will need a roll bar, 5 point harness, and some other safety items I don't remember without looking up.
9.99 to 8.00 you will need a roll cage, competition license, parachute, and even more safety equipment.