Strano Performance Lowering Springs-on sale, details inside.
#1
Strano Performance Lowering Springs-on sale, details inside.
Here we go! The big announcement.....
Strano Performance Parts Lowering Spring sets are officially on sale. A second shipment is due in here next week, we've found the ride heights and fitment to be just what was intended. So they will not be available to the general public.
The all important details:
Price: $269 shipped
Lowering amount: Approximately 1.25-1.3" (result vary from car to car, but all have been consistently in that range as was intended.
Spring rate: 550 lb/in. linear rate front. 100/150 lb/in. dual-stage rear. The dual stage is needed to keep the spring from coming loose in droop. the working rate is only 150 lbs/in. and it's very obvious the softer portion is immediately non-working when the car is on the ground.
Other details: I did all the specification work on these springs. The rates, the amount of lowering are all mine. These are NOT just rebranded springs. I don't have spring equipment, so I can't make them. The company building these for me is Vogtland.
Vogtland has pretty much taken over the market in some big racing series which tells you the springs are not crap.
My springs use Vogtland's proprietary VVS alloy which is 35% lighter than the normal spring steel. A set of Strano Peformance Parts springs boxed is 28 pounds. A set of anything else, Hotchkis, Eibach, etc.... is around 40-44 pounds depending on the actual spring set.
And here are some comments gather from the testers so far:
"I wanted to chime in about the drag racing capability.
I ran a personal best today with strano springs and koni SA's.
12.1 @ 118, 1.91 60'. "
"Stance looks perfect.
Ride is firm.
Turns great.
Springs = great product."
"The ride height data:
Before with LCA brackets, UMI APHR, 275/35 18 front 295/35 18 rear, stock
springs and struts/shocks, stock control arms.
LF: 27 1/2
LR: 28 5/8
RF: 27 1/2
RR: 28 1/2
After:
LF: 26 5/16
LR: 27 1/4
RF: 26 5/16
RR: 27 1/8
Total drop so far:
F: 1 3/16
R: 1 3/8
The springs stay put at full droop too."
"Got the Konis and springs on the car, Sam you have mail! I am very happy with the ride height / handling of the car so far. Thanks for the help Sam!"
Strano Performance Parts Lowering Spring sets are officially on sale. A second shipment is due in here next week, we've found the ride heights and fitment to be just what was intended. So they will not be available to the general public.
The all important details:
Price: $269 shipped
Lowering amount: Approximately 1.25-1.3" (result vary from car to car, but all have been consistently in that range as was intended.
Spring rate: 550 lb/in. linear rate front. 100/150 lb/in. dual-stage rear. The dual stage is needed to keep the spring from coming loose in droop. the working rate is only 150 lbs/in. and it's very obvious the softer portion is immediately non-working when the car is on the ground.
Other details: I did all the specification work on these springs. The rates, the amount of lowering are all mine. These are NOT just rebranded springs. I don't have spring equipment, so I can't make them. The company building these for me is Vogtland.
Vogtland has pretty much taken over the market in some big racing series which tells you the springs are not crap.
My springs use Vogtland's proprietary VVS alloy which is 35% lighter than the normal spring steel. A set of Strano Peformance Parts springs boxed is 28 pounds. A set of anything else, Hotchkis, Eibach, etc.... is around 40-44 pounds depending on the actual spring set.
And here are some comments gather from the testers so far:
"I wanted to chime in about the drag racing capability.
I ran a personal best today with strano springs and koni SA's.
12.1 @ 118, 1.91 60'. "
"Stance looks perfect.
Ride is firm.
Turns great.
Springs = great product."
"The ride height data:
Before with LCA brackets, UMI APHR, 275/35 18 front 295/35 18 rear, stock
springs and struts/shocks, stock control arms.
LF: 27 1/2
LR: 28 5/8
RF: 27 1/2
RR: 28 1/2
After:
LF: 26 5/16
LR: 27 1/4
RF: 26 5/16
RR: 27 1/8
Total drop so far:
F: 1 3/16
R: 1 3/8
The springs stay put at full droop too."
"Got the Konis and springs on the car, Sam you have mail! I am very happy with the ride height / handling of the car so far. Thanks for the help Sam!"
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
Last edited by Sam Strano; 09-19-2006 at 10:56 AM.
Trending Topics
#10
Call, we'll discuss. But I don't do "ready make pacakages" because different situations warrant different parts.
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
#11
There is a thread with pics, but I don't have the link handy.....
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
#12
TECH Fanatic
Originally Posted by Sam Strano
Call, we'll discuss. But I don't do "ready make pacakages" because different situations warrant different parts.
Which ones do you recommend?
#13
If you are asking me what I'm telling you to buy..... I can't. Bottom line is simple. If you are looking Koni, then it comes down to ease of adjustment/how much adjustment. 3rd gen rears are cheaper, but harder to adjust and have less adjustments. 4th gens cost more, but are a lot easier to work with. Pick one, can't go wrong either way.
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
#14
TECH Fanatic
Originally Posted by Sam Strano
If you are asking me what I'm telling you to buy..... I can't. Bottom line is simple. If you are looking Koni, then it comes down to ease of adjustment/how much adjustment. 3rd gen rears are cheaper, but harder to adjust and have less adjustments. 4th gens cost more, but are a lot easier to work with. Pick one, can't go wrong either way.
#15
TECH Addict
iTrader: (22)
Originally Posted by Sam Strano
There is a thread with pics, but I don't have the link handy.....
https://ls1tech.com/forums/suspension-brakes/576054-before-after-pics-strano-springs.html
#16
LS1 Tech Administrator
iTrader: (14)
Nice springs. Bump for Sam.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
#17
10 Second Club
iTrader: (10)
Join Date: Feb 2004
Location: Manteca, CA
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
My God I wish we could have gotten in on the testing phase or they had come out a little sooner.
I might consider changing the Hotchkis for these in the future though! Bump for a great guy and great business!
I might consider changing the Hotchkis for these in the future though! Bump for a great guy and great business!
#18
TECH Fanatic
iTrader: (20)
Join Date: May 2004
Location: Gilbert, AZ
Posts: 1,365
Likes: 0
Received 0 Likes
on
0 Posts
Sam - I will call you Monday, I'm in dire need of new springs and shocks, and I think it's time, I'm tired of riding on the bump stops with my 6 year old Eibach/Bilstein combo, they've done their job for the 104k miles they have been used
Look forward to talking to you!!
Look forward to talking to you!!
#19
Spring are here, in the shop. 15 sets were boxed and sent yesterday! If you've been waiting for them to arrive, they have and they are now waiting on you.
Please feel free to contact me with any questions!
Please feel free to contact me with any questions!
__________________
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion
www.stranoparts.com --814-849-3450
Results matter. Talk is cheap. We are miles beyond the success anyone else has had with the 4th gens, and C5, C6, C7 Corvettes,
10 SCCA Solo National Championships, 2008 Driver of they Year, 2012 Driver of Eminence
13 SCCA Pro Solo Nationals Championships
2023 UMI King of the Mountain Champion