Odarabla's infinite BS thread for the foreskinned (AKA Smack Down)
Holy **** you guys have some expensive *** turd-gens up there!!! Over 10k for an Iroc is retarded.
http://orlando.craigslist.org/cto/4153586050.html $4700
http://orlando.craigslist.org/cto/4187151888.html $3900
http://lakeland.craigslist.org/cto/4201260447.html $4500
**edit** Now that I think about it, instead of stuffing my old stock shortblock motor into a tin can ricer like an RX7 or 240 it would be way easier to get a third gen roller for ~500 bucks and throw it in there - they are pretty light too, and it will bolt right up without needing all the swap parts.
http://orlando.craigslist.org/cto/4153586050.html $4700
http://orlando.craigslist.org/cto/4187151888.html $3900
http://lakeland.craigslist.org/cto/4201260447.html $4500
**edit** Now that I think about it, instead of stuffing my old stock shortblock motor into a tin can ricer like an RX7 or 240 it would be way easier to get a third gen roller for ~500 bucks and throw it in there - they are pretty light too, and it will bolt right up without needing all the swap parts.
Teching In
TECH Resident
iTrader: (4)
Join Date: Oct 2011
Location: heading South East on Bakalakadaka street
Posts: 819
Likes: 0
Received 1 Like
on
1 Post
Its 'about 10s'. Ricer maths would put him in the 10.4 @ 137mph.
Banned
iTrader: (1)
Join Date: Aug 2009
Location: chattanooga Tn
Posts: 1,352
Likes: 0
Received 0 Likes
on
0 Posts
They are crazy expensive.
I was loooking for MK3s and found this one... Yes please! A little steep but I love the car
http://tampa.craigslist.org/hil/cto/4168589029.html
Teching In
TECH Resident
iTrader: (4)
Join Date: Oct 2011
Location: heading South East on Bakalakadaka street
Posts: 819
Likes: 0
Received 1 Like
on
1 Post
Teching In
LOL He built his 300m with parts from this site here:
http://www.kalecoauto.com/
http://www.kalecoauto.com/
Edit::Left handed metric screwdriver
Last edited by MACHXLR8; 12-09-2013 at 06:55 PM.
10 Second Club
Holy **** you guys have some expensive *** turd-gens up there!!! Over 10k for an Iroc is retarded.
http://orlando.craigslist.org/cto/4153586050.html $4700
http://orlando.craigslist.org/cto/4187151888.html $3900
http://lakeland.craigslist.org/cto/4201260447.html $4500
**edit** Now that I think about it, instead of stuffing my old stock shortblock motor into a tin can ricer like an RX7 or 240 it would be way easier to get a third gen roller for ~500 bucks and throw it in there - they are pretty light too, and it will bolt right up without needing all the swap parts.
http://orlando.craigslist.org/cto/4153586050.html $4700
http://orlando.craigslist.org/cto/4187151888.html $3900
http://lakeland.craigslist.org/cto/4201260447.html $4500
**edit** Now that I think about it, instead of stuffing my old stock shortblock motor into a tin can ricer like an RX7 or 240 it would be way easier to get a third gen roller for ~500 bucks and throw it in there - they are pretty light too, and it will bolt right up without needing all the swap parts.
10 Second Club
iTrader: (8)
It does.....but that reduces the coefficient of friction.
HiO would run 4's in the 1/4 with helium filled tires. His initial launch would angle his car toward the sky and the helium would lift him off the ground. The torque from his launch would be realized throughout the entire 1/4 and with no drag because the tires wouldn't be touching the ground, he would be running 4.50's in the 1/4 with "a bolt on LS6."
Hello, World Record.
Hello, World Record.
Holy **** you guys have some expensive *** turd-gens up there!!! Over 10k for an Iroc is retarded.
http://orlando.craigslist.org/cto/4153586050.html $4700
http://orlando.craigslist.org/cto/4187151888.html $3900
http://lakeland.craigslist.org/cto/4201260447.html $4500
**edit** Now that I think about it, instead of stuffing my old stock shortblock motor into a tin can ricer like an RX7 or 240 it would be way easier to get a third gen roller for ~500 bucks and throw it in there - they are pretty light too, and it will bolt right up without needing all the swap parts.
http://orlando.craigslist.org/cto/4153586050.html $4700
http://orlando.craigslist.org/cto/4187151888.html $3900
http://lakeland.craigslist.org/cto/4201260447.html $4500
**edit** Now that I think about it, instead of stuffing my old stock shortblock motor into a tin can ricer like an RX7 or 240 it would be way easier to get a third gen roller for ~500 bucks and throw it in there - they are pretty light too, and it will bolt right up without needing all the swap parts.
Dad's 85 IROC has about 23kmiles and has been garage kept. It's like new.
Banned
iTrader: (1)
Join Date: Aug 2009
Location: chattanooga Tn
Posts: 1,352
Likes: 0
Received 0 Likes
on
0 Posts
Found a 2002 4x4 chevy syep side that has 185k miles n its going for almost 10k. Is it a good buy? Anything i should be afraid of? The bed is all scratched up but i plan on spraying bed liner in it and it needs new head lights.