Ran a New 5.0 tonight
#141
10 Second Club
Thread Starter
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was gonna drop bye last night on the way home to run the bike , but its sounds like you have the front air dam done??? We need to get someone to video it and than i we both can put up our dyno sheets, and our time slip. My car makes more at the wheels. Yours is lighter. We both drive good , but i have to lift and shift where you can wide open shift with no clutch....So the car with the most power sometime doesnt always win.
#142
10 Second Club
Thread Starter
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
When I ran 12.1 with it DA was 300 and temp was 55* and no humidity.
But when I get back I will be more then happy to meet you half way between Ohio and VA and smoke your ***. I mean no excuses right? I will tell you that you will need another 10-15 more mph on that trap speed.
I will have the car back by then.![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
But when I get back I will be more then happy to meet you half way between Ohio and VA and smoke your ***. I mean no excuses right? I will tell you that you will need another 10-15 more mph on that trap speed.
I will have the car back by then.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#145
10 Second Club
Thread Starter
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yep. Not really a "crate" motor because I did'nt buy it new in the crate. It was in peices but all peices was there. New rings, bearings and converted to wet sump with the proper reluctor wheel and timing set.
#150
Teching In
iTrader: (2)
Join Date: Jul 2011
Location: Winchester,Va
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
60 ft was 1.952 1/8 was 7.726 @95.62. The time slip i have from the last time we raced was you went 60ft in 1.90 1/8 was 7.55 @ 96.92 and 1/4 was 11.577 @ 122.79 the same day i had a **** run agaisnt you i went a 12.8 @117 lmao... But yes the ls6 run very well and i havent got him yet, but im hopeing i can get you 1 for 9....if i get lucky right
#151
TECH Apprentice
Join Date: Jan 2002
Location: Gilbert, AZ
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not sure yet. I want to put a few miles on it and see how we like it. Either just going to do an intake/x-pipe/tune, or may just do a roush or whipple.
#154
10 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Now you have a crate engine and bolt ons and still don't run faster then some the bolt on 5.0's? Yet you also have yet to prove your times. I can put some thing in my sig and it count. Slip/video something?
Oh you going to say I didn't put my own cage in?
#155
Teching In
iTrader: (2)
Join Date: Jul 2011
Location: Winchester,Va
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here is the tiem slip i was referring i had of dougs car vs mine. Like i said i have 03 mach one on 7.5 lbs and makes well over 425 to the wheels. weights 3460 with me in it. Runs mid 11's and is dd. I havent beat hiossiver yet. Not putting down your 5.0 cammer . i love them but dougs car is what he says it is. Its a very fast and well rounded street car. nuff said
[/ATTACH]
![Ran a New 5.0 tonight-11111.jpg](https://ls1tech.com/forums/attachments/street-racing-kill-stories/309036d1469151641t-ran-new-5-0-tonight-11111.jpg)
I don't worry about your car. But nice to know you scared to run it seems. Already making excuses. I mod it cause I don't want to waste time with LS6. I want to shoot for faster cars then low 11s. Also being in Iraq how am I suppose to do it myself? Also so if some one offered to take your car put a supercharger on it for free or at a 1/4 of the cost you wouldn't do it? Get the **** out here.
Now you have a crate engine and bolt ons and still don't run faster then some the bolt on 5.0's? Yet you also have yet to prove your times. I can put some thing in my sig and it count. Slip/video something?
Oh you going to say I didn't put my own cage in?
Now you have a crate engine and bolt ons and still don't run faster then some the bolt on 5.0's? Yet you also have yet to prove your times. I can put some thing in my sig and it count. Slip/video something?
Oh you going to say I didn't put my own cage in?
#156
10 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here is the tiem slip i was referring i had of dougs car vs mine. Like i said i have 03 mach one on 7.5 lbs and makes well over 425 to the wheels. weights 3460 with me in it. Runs mid 11's and is dd. I havent beat hiossiver yet. Not putting down your 5.0 cammer . i love them but dougs car is what he says it is. Its a very fast and well rounded street car. nuff saidAttachment 309036[/ATTACH]
So you posted slip is that him on the right? And what was time in right?
Also as mentioned hard to compare cars that ran at 150 DA and 2700-3500 DA. He so sure he can out run bolt on 5.0's why not call out some teh ones that have been posted of them going low 11's or even high 10's. Since he don't think it is happening?
#157
Teching In
iTrader: (2)
Join Date: Jul 2011
Location: Winchester,Va
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That slip is hard to read you are one on left I take it? And as I said his car will not get it done. He will complain oh you have a blower. Not my fault he didn't get one. Go fast is what I care about. N./A blower turbo whatever. If some thing goes wrong and I don't get the blower I will still run him. I am not scared. As mentioned before I am willing to meet half way once I return and make my way to ohio.
So you posted slip is that him on the right? And what was time in right?
Also as mentioned hard to compare cars that ran at 150 DA and 2700-3500 DA. He so sure he can out run bolt on 5.0's why not call out some teh ones that have been posted of them going low 11's or even high 10's. Since he don't think it is happening?
So you posted slip is that him on the right? And what was time in right?
Also as mentioned hard to compare cars that ran at 150 DA and 2700-3500 DA. He so sure he can out run bolt on 5.0's why not call out some teh ones that have been posted of them going low 11's or even high 10's. Since he don't think it is happening?
#158
10 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It is hard to read. Its the one i mention on the above post His was a 11.557 @ 122.79. Dont worry about mine it was a really bad pass. But that one time when he beat me bad. Like i said my car is a mid 11 sec mach one. he beats me. dont like to admit it, but its normally really close and fun race. Im sure he'd be willing to run one of these low 11 high 10 sec 5.0. If it has full inter, a/c, power brakes and power steering. like our car he would give it credit.
But I have no plans on gutting my car. I will have no back seats as they are worth less for me. That will save me a whole 25-30 lbs.
#159
Restricted User
iTrader: (12)
Join Date: Feb 2010
Location: kansas
Posts: 1,786
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Why does it seem like hiossilver and 03turbomach1 are always posting within mins of eachother? Either hiossilver is 03turbomach1 or you 2 are on the phone telling one another to get on lmao
#160
11 Second Club
Join Date: Jul 2010
Location: E-town raceway
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
See always a stipulation for him to run. What happen to run what you brung? I know the Revolution Automtive car went 10.99 with his full interior/ac but he also had ported heads. He then added the Boss and boss cams and went 10.77 ....with a hair worse air. WoodBine motorsports has interior but they have racing seats. Not sure about AC. AC isn't really going to make you gain that much power.
But I have no plans on gutting my car. I will have no back seats as they are worth less for me. That will save me a whole 25-30 lbs.
But I have no plans on gutting my car. I will have no back seats as they are worth less for me. That will save me a whole 25-30 lbs.
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
Oops..sorry. didn't see the excuses flowing afterwards.