Stock LS6 CTS-V vs Stock 300C SRT8 vs cammed/full bolt on 3v
#6
7 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Good pulls!
Trending Topics
#10
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Those should be the first mods.........why would you ask and then say besides?
A fast 90 or 102 would be worth near 20 hp on it. A set of 1.8 roller rockers give great tq through the middle too.
A fast 90 or 102 would be worth near 20 hp on it. A set of 1.8 roller rockers give great tq through the middle too.
#12
TECH Resident
iTrader: (4)
Join Date: Oct 2011
Location: heading South East on Bakalakadaka street
Posts: 819
Likes: 0
Received 1 Like
on
1 Post
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd disagree. The flywheel and clutch combo is solid, but you gain a solid amount with headers and tune in these V1s. Manifolds pretty restrictive.
If you're talking just air filter setup intake tubing, V1 gains just about nothing. Stock intake system is pretty solid. No real reason to upgrade it until cam is done, or intake manifold is upgraded.
Intake mani, the LS2 mani is worse than the LS6, with the LS2 really in need of an upgrade. LOL
Intake mani, the LS2 mani is worse than the LS6, with the LS2 really in need of an upgrade. LOL
#13
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd disagree. The flywheel and clutch combo is solid, but you gain a solid amount with headers and tune in these V1s. Manifolds pretty restrictive.
If you're talking just air filter setup intake tubing, V1 gains just about nothing. Stock intake system is pretty solid. No real reason to upgrade it until cam is done, or intake manifold is upgraded.
Intake mani, the LS2 mani is worse than the LS6, with the LS2 really in need of an upgrade. LOL
If you're talking just air filter setup intake tubing, V1 gains just about nothing. Stock intake system is pretty solid. No real reason to upgrade it until cam is done, or intake manifold is upgraded.
Intake mani, the LS2 mani is worse than the LS6, with the LS2 really in need of an upgrade. LOL
the same theory goes for the 5gens. There's just to much rotational mad to overcome. You're far better off working on that first even though it don't add power in the normal sense. But it will help acceleration.
Last edited by HioSSilver; 06-15-2014 at 09:16 PM.
#15
TECH Resident
iTrader: (4)
Join Date: Oct 2011
Location: heading South East on Bakalakadaka street
Posts: 819
Likes: 0
Received 1 Like
on
1 Post
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You're wrong. Spinning a 80lb clutch is dumb. You will not realize the potential of the headers. ......they are just fighting to much weight.
the same theory goes for the 5gens. There's just to much rotational mad to overcome. You're far better off working on that first even though it don't add power in the normal sense. But it will help acceleration.
the same theory goes for the 5gens. There's just to much rotational mad to overcome. You're far better off working on that first even though it don't add power in the normal sense. But it will help acceleration.
No denying there's some good rev potential on the table with it changed. But clutch should be done later down the road, when you've already got some power to it, and you've got an idea what you plan on doing with it. The very FIRST mod to do? Not in my opinion.
Anyone who jumps into a V1 and wants weight reduction is going to have a hard time. There's very few things that will save decent weight. No ones going to pull heated seats (100lbs each) out in a 4 door Cadillac unless they are focusing on making it a track car... and by then... They're out this section for the most part. LOL
[edit]
On second thought... the first mod someone should do to a newly acquired stock V1 is motor mount, trans mount and diff bushings. LOL
#17
TECH Regular
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, spinning an 80lbs clutch\flywheel combo is a lot, but clutch shouldn't be first thing done, if you don't even have an idea of what you plan on getting power level at.
No denying there's some good rev potential on the table with it changed. But clutch should be done later down the road, when you've already got some power to it, and you've got an idea what you plan on doing with it. The very FIRST mod to do? Not in my opinion.
Anyone who jumps into a V1 and wants weight reduction is going to have a hard time. There's very few things that will save decent weight. No ones going to pull heated seats (100lbs each) out in a 4 door Cadillac unless they are focusing on making it a track car... and by then... They're out this section for the most part. LOL
[edit]
On second thought... the first mod someone should do to a newly acquired stock V1 is motor mount, trans mount and diff bushings. LOL
No denying there's some good rev potential on the table with it changed. But clutch should be done later down the road, when you've already got some power to it, and you've got an idea what you plan on doing with it. The very FIRST mod to do? Not in my opinion.
Anyone who jumps into a V1 and wants weight reduction is going to have a hard time. There's very few things that will save decent weight. No ones going to pull heated seats (100lbs each) out in a 4 door Cadillac unless they are focusing on making it a track car... and by then... They're out this section for the most part. LOL
[edit]
On second thought... the first mod someone should do to a newly acquired stock V1 is motor mount, trans mount and diff bushings. LOL
#20
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
"It's like we've got each others' backs..." - YouTube
I recently started having clutch issues, but this clutch has MILES on it for a stock clutch... so its just due to age.
I recently started having clutch issues, but this clutch has MILES on it for a stock clutch... so its just due to age.
lol it's not even his kid.