whats your car sitting at i just cut my front springs 1 coil along with bmr front lowering a-arms i didnt measure it stock but it was abnormally high made the rear look like was sagging now it sitts 25.5 inch front rear is 27.5 inch i like the raked look

whats your guys front ride hight with lowering springs ?

 

26.5" in the front, with a Strano/Koni set up.

 

Stock is usually around 28" depending on tire size.

 

What are your reference points? The highest point in the
wheel arch?

 

yeah just center of the rim using a tape measure to the top of the wheel well off the floor

 

For this "quick and dirty" discussion, that's what I used also. In reality, GM uses either the rocker panels or the inner pivot bolts of the lower control arms.

 

I'm 26.5" Front and 27.25" Rear with #850/#200.

 

The last combination I installed using our BMR lowering springs and Koni shocks set the car at 26 1/8" up front and 26 1/2" in the rear. Now there is a little variance from car to car but it shouldn't be too much.

 

BMR spring with Bilstien shocks here. Ride height below:

Front Driver: 26 4/8"
Front Passenger: 26 1/8"

Rear Driver: 26 3/8"
Rear Passenger: 26 2/8"

Love the stance and ride of the BMRs.

 

26 1/8" fronts

26 5/8" rears

 

26 3/8 on all four corners Strano springs w/ Koni str.t's installed this past week, stock 16" wheels and tires, UMI solid front and rear sway bars, subframe connectors (bolt on) and strut tower brace.