99 ss camaro,mods,baltimore,$4900 firm
03-14-2009, 10:00 AM
#1
Teching In
Thread Starter
iTrader: (25)
Join Date: Jan 2006
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
99 ss camaro,mods,baltimore,$4900 firm I am selling my 99 SS.I am the second owner of this car and have put a lot of time and money into it.I need to clean up some bills, so I need this gone! I have priced it very, very low for a quick sale.So on to the details.
The car has 104,886 miles on the odometer.I installed a 2002 shortblock in it that now has 82k on it.This has the better rod bolts.Motor has always had mobil 1 in it and has been maintained very well.The car was tuned with a TSP 228R cam.I have since installed an 01 Z06 cam because I was going the turbo route.All you would need to do is put a 228r cam back in and the car would not need to be tuned.This would put you over 400rwhp.Here are the list of mods:
-Mcleod adjustable master cylinder
-Mcleod single disk clutch
-Edelbrock adjustable torque arm
-Adjustable rear sway bar
-tubular lower control arms
-T/A differential cover
-Pacesetter long tube headers
-O/R y
-Borla cat back
-01 t56 with 41k miles
-Ported 5.3's with PRC springs good up to .650 lift
-TSP hardened pushrods
- SLP ported ls6 oil pump
-SLP double roller timing chain
-SLP line lock
-Drilled and slotted rotors with 2.5k on them
-LS6 intake
-Ported throttle body with smooth bellows
-MTI lid
-4.10 gears
-ARP head studs
-255lph fuel pump
-Welded subframe connectors
Now for the things that could use some attention.There is a ripple in the back drivers side quarter panel from a tent pole that blew into the side of the car.It could use some rear tires.I didn't replace the throwout bearing when I replaced the clutch and tranny and is makes some noise,but works fine.The front seat has a tear in it.The rear is starting to make some noise.I keep getting the #2 knock sensor code.I replaced both knock sensors and the socket connecter when I intalled the motor,but it still gives the code.I also removed the AC,Sway bar,and front bumper to lighten the car.I still have everything to go back on.Any questions feel free to give me a call.$4900 Firm Jason 443-506-1056
The car has 104,886 miles on the odometer.I installed a 2002 shortblock in it that now has 82k on it.This has the better rod bolts.Motor has always had mobil 1 in it and has been maintained very well.The car was tuned with a TSP 228R cam.I have since installed an 01 Z06 cam because I was going the turbo route.All you would need to do is put a 228r cam back in and the car would not need to be tuned.This would put you over 400rwhp.Here are the list of mods:
-Mcleod adjustable master cylinder
-Mcleod single disk clutch
-Edelbrock adjustable torque arm
-Adjustable rear sway bar
-tubular lower control arms
-T/A differential cover
-Pacesetter long tube headers
-O/R y
-Borla cat back
-01 t56 with 41k miles
-Ported 5.3's with PRC springs good up to .650 lift
-TSP hardened pushrods
- SLP ported ls6 oil pump
-SLP double roller timing chain
-SLP line lock
-Drilled and slotted rotors with 2.5k on them
-LS6 intake
-Ported throttle body with smooth bellows
-MTI lid
-4.10 gears
-ARP head studs
-255lph fuel pump
-Welded subframe connectors
Now for the things that could use some attention.There is a ripple in the back drivers side quarter panel from a tent pole that blew into the side of the car.It could use some rear tires.I didn't replace the throwout bearing when I replaced the clutch and tranny and is makes some noise,but works fine.The front seat has a tear in it.The rear is starting to make some noise.I keep getting the #2 knock sensor code.I replaced both knock sensors and the socket connecter when I intalled the motor,but it still gives the code.I also removed the AC,Sway bar,and front bumper to lighten the car.I still have everything to go back on.Any questions feel free to give me a call.$4900 Firm Jason 443-506-1056
Last edited by 90nova; 03-14-2009 at 10:26 AM.
